We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,997 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Durma AD-R 30135 CNC Press Brake Machine will be available February 2023 Wila tools
used
pressure: 160 t stroke: 400 mm Frame Width: 350 mm column daylight: 1.100 mm cylinder diameter: 120 mm work height max.: 900 mm total power requirement: 5,5 kW weight of the machine ca.: 1.400 kg dimensions of the machine ca.: 1800x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 200 t stroke: 400 mm Frame Width: 450 mm column daylight: 1.400 mm cylinder diameter: 170 mm work height max.: 900 mm total power requirement: 7,5 kW weight of the machine ca.: 2.300 kg dimensions of the machine ca.: 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 650 t passage width: 920 mm stroke: 1750 mm Table area: 2000x1500 mm ram surface: 2000x1500 mm dayligth: 2100 mm light-barrier: hydraulic: 203 bar closing speed: 500 mm/sec pressing speed: 0,5-10,4 mm/sec hole in plunger diameter/depth: mm opening speed: 250 mm/250 ejector: return capacity: 150 t total power requirement: 75 kW weight of the machine ca.: 47 t dimensions of the machine ca.: 4,4x2,5x7,5 m max pressure 250 bar 800 t impact shock dampening dissolution rate from 0.5 to 66.4 mm / sec The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
LVD tooling Capacity: 100 ton x 3100 mm Backgauge: CNC Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 10 HP Length: 3410 mm Depth: 1480 mm Height: 3050 mm Weight: 9 ton
used
8 axes: Y1 / Y2 / X1 / X2nbsp; / R1 / R2 / Z1 / Z2 Capacity: 100 Ton x 3100 mm Backgauge: CNC Control: Operateur 2 - 8 axes Passage between uprights: 2700 mm Max stroke: 200 mm Max distance between table -- ram: 470 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 92 mm/sec Electric motor (power): 7,5 kW Length: 3680 mm Depth: 1630 mm Height: 2635 mm Weight: 6750 kg
Safan CNCL-K 300-5100 TS1 Capacity: 300 ton x 5100 mm Backgauge: CNC Control: TS3 touch Passage between uprights: 4100 mm Max stroke: 260 mm Depth of throat: 615 mm! Locking speed: 65 mm/sec Working speed: 8 mm/sec Returning speed: 48 mm/sec Electric motor (power): 18,5 kW Length: 5300 mm Depth: 2500 mm Height: 3700 mm Weight: 24,5 ton
LVD PPEB 160 ton x 5100 mm CNC Capacity: 160 ton x 5100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 350 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 79 mm/sec Electric motor (power): 15 kW Weight: 14,5 ton
new
pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 80 mm/sec work speed: 7,5 mm/sec work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm back stop - adjustable: 800 mm voltage: 400 Volt total power requirement: 11,0 kW weight: 7.524 kg range L-W-H: 4250x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 60 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 165 mm/sec work speed: 14,0 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 5640 kg range L-W-H: 3012x1960x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 190 mm table surface area: 170 x 695 mm dayligth: 1000 mm column travel between the guideways: 695 mm weight of the machine ca.: 280 kg. dimensions of the machine ca.: 1,3 x 0,6 x 2,0 mtr. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 6,1 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt weight: 8.514 kg range L-W-H: 4910x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 10 t stroke: 190 mm table surface area: 520 x 120 mm dayligth: 350 mm column travel between the guideways: 520 mm weight of the machine ca.: 104 kg. dimensions of the machine ca.: 910x500x1210 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 12.906 kg range L-W-H: 5100 x 2250 x 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 220 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 185 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 930 mm table width: 200 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 11.020 kg Dimensions (HxWxD): 5050 x 2250 x 2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1.870 kg. dimensions of the machine ca.: 2.050 x 1.000 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7,5 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 3,0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 310 mm table surface area: 285 x 1010 mm dayligth: 1055 mm column travel between the guideways: 1010 mm stroke speed: 180 mm/min total power requirement: 3,0 kW weight of the machine ca.: 1050 kg. dimensions of the machine ca.: 1,93 x 0,9 x 2,26 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,5 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 240 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 16.925 kg Dimensions (HxWxD): 4550 x 2450 x 3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 9.450 kg range L-W-H: 4.250x2.150x2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...
new
pressure: 400 t chamfer lenght: 4270 mm distance between columns: 3780 mm column arm: 510 mm ram stroke speed: 110 mm/sec return speed: 130 mm/sec work speed: 8,0 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 1000 mm table width: 240 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 26.750 kg Dimensions (HxWxD): 5600 x 2650 x 3470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 80 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 380 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 5.227 kg range L-W-H: 3750x1950x2400 mm Furnishing: - DELEM - CNC control model DA-53T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1200 x 2550 mm weight of the machine ca.: 2070 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 155 mm/sec work speed: 9,5 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 6.850 kg range L-W-H: 3.750x1.950x2.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,5 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 22.600 kg Dimensions (HxWxD): 5.350 x 2.450 x 3.150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 50 t stroke: 260 mm dayligth: 1135 mm stroke speed: 215 mm/min column travel between the guideways: 775 mm total power requirement: 1,5 kW weight of the machine ca.: 530 kg. range L-W-H: 1,65 x 0,85 x 2,08 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 310 mm table surface area: 340 x 1010 mm dayligth: 1055 mm working feed: 180 mm/min column travel between the guideways: 1010 mm total power requirement: 3,0 kW weight of the machine ca.: 1.230 kg. dimensions of the machine ca.: 1,93 x 0,9 x 2,26 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm max. ram stroke: 170 mm feed down: 140 mm/sec feed up: 170 mm/sec pressing speed: 17 mm/sec main drive: 5,5 kW table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min total power requirement: 5,5 kW weight of the machine ca.: 3,22 To. dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning contro ...
new
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 11,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t stroke: 150 mm table surface area: 185 mm Breite column travel between the guideways: 530 mm weight of the machine ca.: 162 kg dimensions of the machine ca.: 800 x 700 x 1805 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 765 mm : 10-20 mm/s : 250 mm/s : 1000x750 mm : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 0160 t chamfer lenght: 5120 mm distance between columns: 4050 mm Control: konv. throat: 300 mm table width: 200 mm stroke max.: 200 mm dayligth: 400 mm feed down: 50 mm/sec feed up: 100 mm/sec feed under pressure: 5 mm/sec total power requirement: 11 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 5,4 x 1,75 x 3,3 m Machine will be supplied with many tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / manual per hand lever • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t distance between columns: 1000 mm stroke: 150 mm distance table/ram: 500 mm table surface area: 1000 x 700 mm die cushion stroke: 180 mm ram surface: 1000 x 700 mm ram drills x depth: 50 mm no. of strokes: 85 Hub/min tool shank hole (depth x diameter): 85 x 50 mm clamping slots: 22 DIN 650 form: diagonal number of clamping slots: 2 sheet width: 400 mm plate length: 1000 mm dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m weight of the machine ca.: 8 t total power requirement: 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t stroke: 650 mm throat: 380 mm table surface area: 650 x 1000 mm ram surface: 650 x 1000 mm dayligth: 850 mm die cushion stroke: 220 mm die cushion area: 500 x 520 mm die cushion capacity: 25 t ram stroke speed - under load: Vorlauf 400 mm/sec ram stroke speed: Rücklauf 330 mm/sec drawing speed: Auf 220 mm/sec drawing speed: Ab 300 mm/sec working height (floor - top of table): 1050 mm total power requirement: 18,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,2 x 2,2 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 685 mm : 10-20 mm/s : 250 mm/s : 850x640 mm : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.