hydraulic press used for sale

Pressure regulator manually adjustable PRVA PETOLETKA RA1-161 Z 3/4 in Dimensions: 150 x 130 x 200 mm

Press brake manufactured in 2006. This LVD PPEB 170/30 features a bending length of 3000 mm and a pressing force of 170 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 170/30 machine we have for sale. Contact us for further details.

Press brake manufactured in 2009. This LVD PPEC 220/42 features a bending length of 4000 mm and a pressing force of 220 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEC 220/42 machine we have for sale. Contact us for further details.

Pressure Switch FESTO PEV-1/4-B H343 10773 1 - 12 bar 5 A / 250 V AC max Dimensions: 110 x 70 x 30 mm

Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible.

Pressure transmitter BAUMER ED701 B50.533.126.10 ED701-1540 0 to 100 bar 15 to 30 V DC stainless steel !' used !, Dimensions: 210 x 34 x 34 mm

Pressure Monitor KROM SCHRÖDER DL5K pmax 300 mbar 0.5 to 5 mbar Dimensions: 95 x 90 x 50 mm

Year of construction: 2008 Auction-ID: A1-47394-325

Pressure transmitter, pressure gauge ENDRESS + HAUSER VU 130 CERABAR PMC 133 0 to 1 bar 14 to 39 V DC Dimensions: 140 x 105 x 65 mm

Pressure Transducer, Pressure Gauge ENDRESS + HAUSER VU 130 CERABAR PMC 133 0 to 0.4 bar 14 to 39 V DC Dimensions: 140 x 105 x 65 mm

Auction-ID: A1-51029-161

Capacitive Pressure Gauge MKS 628BX11TDE1B Range: 10 Torr Input 15 V DC Output 0 - 10 V DC Dimensions: 200 x 80 x 80 mm

Pressure Switch FESTO PEV-1/4-B 10773 1 - 12 bar 5 A / 250 V AC max Dimensions: 115 x 75 x 30 mm

Pressure regulator, maintenance unit FESTO LFR-C-1/4-S-B 32889 0 - 16 bar Dimensions: 220 x 185 x 95 mm

Operating pressure: 11bar, capacity: 2000l; for more details see photos of nameplate Auction-ID: A7-50677-929

Pressure relief valve, relief valve NORGREN V64H-NND-RMN p: 0.4 - 10 bar t max: 80 °C connections: 2x Ø 15 mm, 1x R 1/2 inch New !' Dimensions 210 x 75 x 75 mm

SMC ITV2030 - 31F3N3 - Q electro-pneumatic pressure regulator E/P REGULATOR series ITV2000 0 - 10 V DC 0.5 - 5 bar Dimensions: 110 x 100 x 100 mm

Including tank Auction-ID: A1-47366-200

Auction-ID: A1-51029-31

electro-pneumatic pressure regulator SMC ITV2050 - 31F3N3 - Q electro-pneumatic pressure regulator E/P REGULATOR series ITV2000 0 - 10 V DC 0.05 - 9 bar used, tested ! Dimensions: 120 x 100 x 100 mm

Pressure Switches FESTO PEV-1/4-B-OD 175250 1 - 12 bar 250 VAC Dimensions: 85 x 80 x 30 mm

AEROCAP PRO – professional low-pressure sandblasting machine, 17 litres The AEROCAP PRO is a professional mobile low-pressure blasting machine for regular and intensive blasting work on wood, metal, stone and technical components. The machine is designed for commercial use and combines a 17-liter abrasive tank with professional air treatment, automatic start and stop control and wear-resistant tungsten components. TECHNICAL DATA • Model: AEROCAP PRO • Abrasive container: 17 litres • Container bottom: conical • Dimensions: 97 × 34 × 33 cm • Weight: 64 kg • Blasting hose: 10 m, removable • Control: automatic start & stop system • Air treatment: professional compressed air dehumidifier • Pressure gauge to control working pressure • Nozzle: 1 tungsten nozzle in selected size • Nozzle range: 2 to 6.5 mm depending on configuration • Venturi tu ...

Pressure regulator FESTO LRS-D-7-I-MINI 194615 0.5 - 7 bar Dimensions: 150 x 65 x 70 mm

Filter pressure reducer, maintenance unit PNEUMATECH 1100055 0.5 - 10 bar G 1 New ! Dimensions: 275 x 100 x 60 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/12 0 - 400 kPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/18 0 - 1 MPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/17 0 - 140 (400) kPa New ! Dimensions: 320 x 150 x 135 mm

General Description Industrial high-pressure water pump manufactured by PTC , model MLR 300/200 . Heavy-duty electrically driven pumping unit designed for high-pressure water applications. The unit was used exclusively on one project to operate a Wassara water-powered down-the-hole (DTH) drilling hammer. Technical Details Manufacturer: PTC Model: MLR 300/200 Machine type: High-pressure water pump Year: 2022 Operating hours: 578 h Maximum working pressure: 200 bar Maximum flow rate: 300 l/min Electric motor power: 132 kW Power supply: 400 V, 3-phase, 50 Hz Rated current: 250 A Starting system: Star-delta Starter manufacturer: Formis Davide Electrical cabinet protection: IP66 Application Previously used to supply high-pressure water to a Wassara water-powered DTH hammer. Suitable for demanding industrial, drilling and high-pressure water pumping applications where hig ...

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1003/01 0 - 4 kp/cm² New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/13 0 - 1 MPa New ! Dimensions: 345 x 125 x 80 mm

Pressure regulators, pressure reducers MAW ARMATURENWERK HALLE ELN 135 53 611 ( ELN13553611 ) DV - No. 303627 Inlet pressure: max. 1.6 MPa Outlet pressure: 0.1 - 1.0 MPa connections 1/2 inch New ! Dimensions: 220 x 90 x 90 mm

Pressure switches NORGREN / HERION 0880231 0.24 bar Pmax: 80 bar Umax 250 V New ! Dimensions: 95 x 75 x 60 mm

Filter control valve with pressure switch and manual slide valve, maintenance unit FESTO LFR-1/4-D-MINI FRM-D-MINI PEV-1/4-B W-3-1/4 < br /> 159631 170684 10773 2340 1 - 12 bar Dimensions: 210 x 170 x 90 mm

Pressure regulator, precision pressure regulating valve FESTO LRP-1/4-10 159502 0.5 - 10 bar New ! Dimensions: 270 x 75 x 65 mm

Pressure reducer HONEYWELL BRAUKMANN D22-1/2A 1.0 - 10.0 bar DN15 PN40 New ! Dimensions: 150 x 80 x 60 mm

Pressure Control Valve NORGREN R64G-NNT-RSN p: 2 - 17 bar t max: 80 °C New ! Dimensions 200 x 80 x 80 mm

Pressure reducer FORKARDT 15PN25 DN15 PN25 New ! Dimensions: 210 x 90 x 70 mm

Pressure reducer HOFMANN RK4D 15PN25 DN15 PN25 New ! Dimensions: 200 x 90 x 70 mm

Pressure reducer FORKARDT LFA3 130004 0200.08 E808 DN50 New ! Dimensions: 380 x 150 x 130 mm

Pressure Relief Valve, Relief Valve, Relief Valve NORGREN V15-003-NNM0 p: 0.4 - 10 bar t max: 80 °C New ! Dimensions 240 x 110 x 100 mm

Pressure Switch HERION 0854780 0.510 bar Umax 250 V New ! Dimensions: 140 x 130 x 50 mm

Pressure regulator, pressure regulating valve, lockable SEMPRESS A25 0 - 12 bar with 2 keys ! New ! Dimensions: 125 x 42 x 42 mm

Pressure switches FESTO PEV-1/4-B 10773 0.512 bar Umax 250 V used, tested ! Dimensions: 100 x 30 x 75 mm

Pressure regulator with digital precision pressure switch SMC ISE50 - T2 - 62L AR40 - 02 12 - 24 V DC 0.5 - 8.5 bar used ! Dimensions: 140 x 120 x 130 mm

This 3-axis FERMAT CTOF 80/2500 CNC was manufactured in 2006. It features a press force of 80 tons and a maximum bending length of 2500 mm. If you are looking to get high-quality bending capabilities, consider the FERMAT CTOF 80/2500 CNC press brake we have for sale. Contact us for further details.

Pressure Switch, Vacuum Switch with Pressure Gauge FEMA VNM 111 -1.0 - 0.1 bar max. 6 bar 250 V DC, 10 A IP 54 used ! Dimensions: 210 x 115 x 90 mm

Pressure Control Valve, Swivel Differential Pressure Control Valve PARKER, LEGRIS 74712121 1 - 8 bar threaded connections: G 1/2 New ! Dimensions: 100 x 80 x 35 mm

Press brake manufactured in 2022. This DENER DDS 2090 features a bending length of 900 mm and a pressing force of 20 tons. The machine is practically unused and comes complete with tooling. If you are looking to get high-quality bending capabilities, consider the DENER DDS 2090 press brake we have for sale. Contact us for further details.

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Pressure regulator manually adjustable, nitrogen suitable DRUVA EMD 675 A inlet pressure: max. 200 bar outlet pressure: 0.5 - 6 bar stainless steel ! used ! Dimensions: 150 x 150 x 180 mm