135,570 used machines on RESALE, but how to find them? Machine Search
Dismantled / disassembled by the sellerACEC, 9.0 kW, 380 V, 3~50 Hz, 970 rpm380 V, 3-phase, 50 Hz
200941,789 h864,086 strokes4,550 mm2,300 kN (230 t)Cybelec ModEva 10S23,400 kg400 l3 x 400 V / 50 Hz AC24 V37 kVA80 A06/2026Various punches and dies
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SEFA Pneumatic Large Format Press SLIDE-1285, Transfer Area 125 x 85 cm Bought at the beginning of 2021 - works perfectly - hardly used and in very good condition There is still a 5-year warranty on the heating element! Pneumatic Large Format Heat Press Pull-Out Worktop Extremely accurate temperature control +/- 1° thanks to multi-zone measurement technology Large touchscreen display 4 press programs can be stored, production counter - Transfer area 125 x 85 cm, for grouting of slabs up to a size of 120 x 80 cm - Digital time control 0 – 1,800 seconds - Digital temperature control 0-230°C - Contact pressure up to 386 g/cm² - Maximum material thickness 50 mm - Connection data: 12 KW, 400 VAC 3-phase, 20 A - Dimensions press: (WxHxD) 1286 x 794 x 2153 mm - Weight 419 kg The machine needs high-voltage current! Without guarantee and war ...
Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible.
pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment.
Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible.
Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement.
pressure: 8 t throat: 115 mm stroke: 8-56 mm ram - range of adjustment: 30 mm table surface area: 390x230 mm ram surface: 155x125 mm hole in the table: 105x75 mm table height: 820 mm tool hole in ram: 35 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1000x1000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A single-column eccentric press is offered. Press force: 25t, throat depth: 200mm, adjustable stroke range: 8mm-80mm, maximum stroke rate: 180strokes/min, table area X/Y: 560mm/400mm, ram area X/Y: 355mm/220mm, ram adjustment: 50mm, maximum shut height: 320mm. Machine weight: approx. 2150kg. Inspection by appointment is possible.
Used Used Pet preform presses Engel: Year: 2004 Condition: As Is Model: MacPET 4550-320 maszyna Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Used pet preform presses Husky: Year: 2010 Condition: As Is Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs; preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com
Clicker Press GSB-2C Manufacturer: USM Bed size 1m wide x 500mm deep Head size: 360mm wide x 500mm deep
Main characteristics: • Overall dimensions: LxWxH: 1200mm. x 650mm. x 1950mm.; • Designed for shaping sausages in the drying process; • Mobile performance: movement through 6 polyamide wheels; • The pressure on the product is exerted by pneumatic cylinders located at the top of the machine; • Determination of the pressure on the product is carried out by adjusting the pressure of the compressed air supplied to the cylinders; • Capacity: 250-320 kg. depending on the caliber of the product; • Compressed air connection: 1/2" (quick connection with spiral hose); • Pressure 5 to 6 bar; • The machine works with polyethylene countertops with dimensions: 1000mm. x 660mm. x 12mm.; Options /not included in the price/: • Polyethylene hob with dimensions of 1000mm. x 660mm. x 12mm. – 117,00 BGN/pc. excluding VAT (the press collects between 20 and 25 plates, a mult ...
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
automatic baler Manufacturer: UNOTECH Type: UPAMAT 100 V 5 Factory overhauled by the manufacturer in 2024 Technical data: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal Gear Pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: with a bulk density of 30 kg/m³ approx. 10.0 t/h with a bulk density of 50 kg/m³ approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central l ...
pressure: 40 t distance between columns: 600 mm stroke: 150 mm table surface area: 600x410 mm ram surface: 220x130 mm table height: 850 mm weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the press: Manufacturer Strautmann Umwelttechnik GmbH Type BaleTainer Year of construction 2014 Operating hours 14,947 hours Number of bales pressed: 5,174 pieces Press force main press 60 t Area pressing capacity 156 t/m² Dimensions of the insertion shaft 2,815 x 1,085 x 2,250 mm (L x W x H) Bale dimensions 1,100 x 1,100 x 700 mm (W x D x H) Drive power 5.5 kW Total connected load 13 kW Fuse 32 A, connector CEE 32 A Bonding 4-fold vertical, fully automatic Bale weights up to 400 kg, depending on material Hydraulic oil tank volume 90 L PLC control Siemens S7-1200 Control panel Siemens Simatic Touch Panel Press dimensions assembled 6,415 x 2,056 x 2,758 mm (L x W x H) Machine weight press approx. 7.5 t Scope of delivery: BaleTainer press incl. tilting device and bale chute. A megaliner with an effective interior height of at least 2.9 m is requi ...
pressure: 16 t throat: 185 mm stroke: 8-60 mm no. of strokes: 140 Hub/min ram - range of adjustment: 50 mm table surface area: 500x340 mm ram surface: 230x155 mm hole in the table: Ø160 mm table height: 800 mm hole in the table: Ø35 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200x1200x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.
pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...
In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.
Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.
Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible.
pressure: 63 t throat: 440 mm stroke: 8-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 63 mm table surface area: 720x750 mm ram surface: 440x280 mm hole in the table: Ø 240 mm table height: 830 mm tool hole in ram: Ø 40 mm weight of the machine ca.: ca. 5,0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.
Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details.
pressure: 50 t distance between columns: 310 mm table surface area: 320x310 mm ram surface: 200x130 mm table height: 740 mm no. of strokes: 100 Hub/min weight of the machine ca.: 1 t dimensions of the machine ca.: BxTxH 1200x1200x1600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details.
Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.
pressure: 100 t distance between columns: 310 mm no. of strokes: 80 Hub/min ram - range of adjustment: 40 mm table surface area: 400x300 mm ram surface: 250x190 mm table height: 960 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 65 t throat: 370 mm stroke: 29-151 mm no. of strokes: 50 Hub/min ram - range of adjustment: 80 mm table surface area: 1300x700 mm ram surface: 1000x600 mm hole in the table: ¦ 110 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1700x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.
pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t distance between columns: 310 mm no. of strokes: 80 Hub/min ram - range of adjustment: 40 mm table surface area: 400x300 mm ram surface: 250x190 mm tool hole in ram: Ø 35 mm table height: 960 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
