hydraulic press used for sale

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 25 mm -Diameter eyes: 25/30 mm -Stroke: 90 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 62/62/H330 mm -Weight: 5.1 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 44/44/H595 mm -Weight: 3.1 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 32 mm -Piston rod: Ø 14 mm -Eye diameter: 12 mm -Stroke: 200 mm -Dimensions: 130/70/H405 mm -Weight: 3 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Electric motor: 80 V with 2 hydraulic pumps -Power: 2.2 kW -Speed: 1480 rpm -Dimensions: 340/290/H590 mm -Weight: 45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: mm -Piston rod: Ø 35 mm -Stroke: 750 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 24 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston: Ø approx. 35 mm -Piston rod: Ø 20 mm -Stroke: 40 mm -Dimensions: 65/65/H380 mm -Weight: 3.75 kg

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 16 mm -Stroke: 260 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 457/43/H38 mm -Weight: 2.45 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 12 mm -Stroke: 50 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 242/43/H38 mm -Weight: 1.37 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 38 mm -Piston rod: Ø 25 mm (M20 x 1.5 mm thread) -Stroke: 60 mm -Pressure: 70 bar -universally applicable: -Dimensions: 224/86/H53 mm -Weight: 2.5 kg

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Hydraulic filter changer: 200 mm. With pressure transducer.

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Bicycle pump type: -with tank and control valve -Drive: 24 V -Dimensions: 285/280/H750 mm -Weight: 38 kg

Hydraulic pump, oil pump, gear pump -Drive: 2.2 kW 1420 rpm -Dimensions: 550/280/H260 mm -Weight: 40 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Admission wheel recess: Ø 160 mm -universal: applicable -Number: 2x motors available -Price: per piece -Dimensions: 190/190/H342 mm -Weight: 70 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...