hydraulic press used for sale

Hagglunds MK64 11100 AO RN 0100 Hydraulic Motor available for Sale. Make: Hagglunds Type: MK64 11100 AO RN 0100 IMDIVID NO:611 46 32666/611 56 32651/611 56 32647/611 46 32650 Displecement: 11030Cm³/R Torque: 176NM/BOR Max Press:320Bar Rated Speed: 70R/Unit Max Speed:120R/Unit Max Speed Running: 600R/Unit

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HLS MACH. NO.:HLS 6690 / 6691/ 6685 DATE:Jan-77 RATED TORQUE:2300 K.G.M. 16636 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. DATE OF MFG:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

MAKE:FUKUSHIMA LTD. TYPE:MA10B MAX WORKING PR.:30 MFG NO.:29801 DATE OF MFG:1979 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

MAKE:FUKUSHIMA LTD. TYPE:MA10C MFG NO.:29807 Max. Working Pressure:30kg/cm2 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

Hydraulic pump set Sauer-Sundstrand Model Code MPV 035D AABDDLA Type BAGRSGAA FFDNNN Model No. 4352025 A98-44-29352 with flanged gear pump made in UK

Hydraulic pump, 0513300201, 140 bar, Bosch, mint condition Please note: This is an original Bosch product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, has never been used and is in mint condition. Drive shaft d20mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and co ...

Hydraulic Owner: Mahle Pressure capacity: 110 bar Flow rate: 32 L/min 160 l/min at 2 mWS 160L Tank

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTe ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas HDMF 50/36x550 -Type: HDMF 50/36x550/VORM HS 3750 -Stroke: 550 mm -Piston rod: Ø 36 mm/M22 x 1.5 -Total length retracted: 805 mm -Dimension: 805/160/H160 mm -Weight: 22.3 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 88 mm -Piston rod: Ø 32 mm -Mounting holes: Ø25 x 23 mm / Ø32 x 45 mm -Cylinder: outer Ø 118 mm -Dimensions: 455/160/H120 mm -Weight: 15.4 kg

Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 185 mm -Piston rod: Ø 20 mm / thread Ø20 x 178 mm -Cylinder: outside Ø 65 mm -Dimensions: 470/110/65 mm -Weight: 4.4 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 20 mm/M16 -Stroke: 100 mm -Cylinder tube outside Ø 40 mm -Total length retracted: 280 mm -Admission: hole Ø 20 mm -Dimensions: 280/40/H60 mm -Weight: 2.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 77 mm -Piston rod: Ø 40 mm / thread Ø36 x 66 mm -Dimensions: 400/107 / H117 mm -Weight: 12.9 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 160 bar -Liter output: approx. L/min -Drive: 11 kW 1440 rpm -Dimensions: 710/280/H325 mm -Weight: 102 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 600 mm -Piston rod: Ø 22 mm / M16 -Dimensions: 800/75 / H70 mm -Weight: 11 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Specifications: - working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. Cutting angle adjustment - man. Cutting gap adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment - 17 pcs. Hydraulic hold-downs - front angle stop - front support arms - Drive 400 V / 9 kW - Foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.

Hydraulic filter, filter element -Manufacturer: Hydac, filter element OVP -Type: 1300 R 040 AM -Dimension: Ø 144 x 483 mm -Weight: 4 kg

Hydraulic filter, filter element -Manufacturer: Hydac, filter element Betamicron OVP -Type: 0660 R 010 BN4HC -Dimension: Ø 115 x 334 mm -Weight: 1,8 kg

Hydraulic filter, filter element -Manufacturer: Hydac Betafit, filter element Betamicron OVP -Type: 1.06.08 D 03 BN -Dimension: Ø 152 x 207 mm -Weight: 1.6 kg

Hydraulic filter, filter element -Manufacturer: Hydac Betafit, filter element Betamicron OVP -Type: 1.11.16 D 03 BH Art.No. 1262439 -Dimension: Ø 80 x 425 mm -Weight: 2.2 kg

Hydraulic filter, filter element -Manufacturer: SF Filter, filter element OVP -Type: HY 20659 -Dimension: Ø 78 x 210 mm -Weight: 0.6 kg