138,083 used machines on RESALE, but how to find them? Machine Search
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic quick die change system: yes feedstock transport direction: right to left SLIDE total force (nominal): 400 to stroke: 200 mm COUNTER RAM nominal force: 100 to stroke: 30 mm V-RING nominal force: 200 to stroke: 30 mm TOOL DIMENSIONS lower table (left-right): 650 mm lower table (front-back): 650 mm shut height max.: 420 mm passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 12 mm feed velocity max.: 30 m/min feedstock transport direction: right to left LEVELLER UNIT sheet width max.: 500 mm sheet width (min): 60 mm sheet thickness max.: 12 mm sheet thickness min.: 1 mm integrated feed function: yes STRIP-FEEDER sheet width max.: 400 mm sheet ...
CONTROLS electronic controls WORKING RANGE PRESS BRAKE total force (nominal): 85 to Working length: 2050 mm distance between columns: 1700 mm BENDING BEAM (Y-AXIS) stroke: 215 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2000 mm total height: 2400 mm total weight approx.: 8300 kg
• Presumably used for punching pipes. • Passage diameter: approx. 450 mm
Specially designed for stamping, die cutting, and forming work. Model CM-50NC Power 50 TN Motor power 5.5 KW Throat depth 265 mm Working speed 9.9 mm/s Approach speed 50 mm/s Return speed 66 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700 x 450 mm Upper table 550 x 300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg STRUCTURE AND TABLES The CM/NC series hydraulic presses consist of an electro-welded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. They are equipped with an upper table and a lower table made of C45E ste ...
Nuts, and so on; Includes 7 plastic stacking crates with dimensions 400 x 600 mm Auction-ID: A1-49785-374
Reductions, and so on; In 17 cardboard boxes Auction-ID: A1-49785-375
General Description Hydraulic workshop press manufactured by OMCN , model 204/RE . Designed for heavy-duty pressing, straightening, assembling and disassembling operations in industrial workshops and maintenance facilities. The press features an H-frame welded steel construction with an adjustable work table. Technical Details Manufacturer: OMCN Model: 204/RE Machine type: Hydraulic press Year: 2003 Press capacity: 150 t Operation: Hydraulic with electric motor and manual valve control Bed size: Approx. 850 × 650 mm Adjustable bed with multiple height positions Frame: H-frame welded steel construction Hydraulic pressure gauge: WIKA, 0–600 bar Condition Used industrial condition. Complete hydraulic press with adjustable bed, hydraulic pressure gauge and manual control valves. Operational status has not been tested. Dimensions Overall dimensions and weight: Not co ...
Control Conventional Power [tonnes] 63 Max. stroke [mm] 200 Table length [mm] 630 Table width [mm] 525 Ram length [mm] 1100 Motor power 20.0kW Auction-ID: A1-40982-28
pressure: 4000 t stroke: 380 mm dayligth: 1050 mm distance between columns: 1580 mm table-size: 1520 x 1600 mm dimension of ram: 1470 x 1500 mm ram adjustment: 15 mm strokes of ram per min.: 50 ejector path: 31 / 70 mm main drive: 200 kW height over floor: 7520 mm total power requirement: ca. 250 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 4,4 x 4,6 x 7,5 m complete forging line includes an - Smeral Hot Forging Press - induction heater - Manyo 460-millimeter forging roll - manipulator with forging roll link - SMERAL 500-ton trimming press The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46126-11241
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 150 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3750 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4700 mm Depth: 1700 mm Height: 2850 mm Weight: 11 ton
Haco ERMS 230 ton x 4300 mm CNC Capacity: 230 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 200 mm/sec Working speed: 8 mm/sec Returning speed: 125 mm/sec Electric motor (power): 19 kW Length: 4320 mm Depth: 2000 mm Height: 2800 mm Weight: 15 ton
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 3500 mm Depth: 1700 mm Height: 2500 mm Weight: 8 ton
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton
3 assen: Y1 / Y2 / X bovenste en onderste Amada-systeemtooling Gerenoveerd door Haco in 2024 Capacity: 135 ton x 3600 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4200 mm Depth: 1700 mm Height: 2500 mm Weight: 9 ton Capacity: 135 ton Bending length: 3100 mm
3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3700 mm Electric motor (power): 15 kW Weight: 18 ton Capacity: 200 ton Bending length: 4300 mm
MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is in good technical condition; it can be tested by prior arrangement.
STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a removab ...
TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN. 2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter. Maximum useful height cylinder plate of 1550 mm. Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER 1 central cylinder of 80 Tn of power with 1200 mm stroke. Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length. Maximum useful height ...
Key data: 1250 t
Manufacturer: Dieffenbacher Model: PO-F 1250 A Year: 1979 Condition: Used Stock number: 9543 Control system: Siemens Simatic HMI Compressive force: 1250 t Table length: 1250 mm Table width: 1250 mm Stroke: 630 mm The general overhaul was carried out in 2015.
Equipped with 10 crimp sets; unused Auction-ID: A1-47364-99
Equipped with height adjustment and various accessories Auction-ID: A1-50251-599
Key data: 400 t
The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.
Frame press, CE certified according to the latest guidelines. - can be moved sideways with manual hydraulics - 2 pcs. press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 press pads pressure 20 t stroke 180 mm clear width between stands 540 x 100 mm installation height max. 990 mm cylinder diameter 72 mm piston diameter 48 mm machine weight approx. 0.12 t space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-50523-787
This frame press is CE certified according to the latest guidelines - with manual hydraulics - Cylinder to be moved sideways - 2 pcs. press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 press pads pressure 10 t stroke 180 mm clear width between uprights 335 x 115 mm installation height max. 340 mm cylinder diameter 56 mm piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A7-50523-737
Distance between the front columns 2100 mm and distance between the side columns 1100 mm. Additional table size 1820 × 1500 mm. Cylinder diameter 250 mm. Main table size 2600 x 1800 mm. Including REGLOPLAS 300LD temperature controller Auction-ID: A7-50524-927
Press for hydraulic lines. Incl Table Stored in working order Auction-ID: A3-46129-32
Built on a metal base of 130x51x87. With extra accessories (see photo). Auction-ID: A3-46129-21203
Zware kantbank gt; 300 ton capaciteit per 1 meter gt; ideaal geschikt voor hoogwaardig gelegeerd staal 6 assen: Y1 / Y2 / X / R / Z / V De bovenste ram heeft een verlenging (hoorn) van 500 mm gt; de totale buiglengte is 4100 mm Hydraulische klemming bovenaan Conische plooien! Akas beveiligingslasersysteem CNC-bombering Uitgerust met een V-Matic variabele buigmatrijs (CNC-gestuurd); V40 tot V160 max. De machine staat op de grond; er is geen fundering nodig. Bevat een breed assortiment zwaar plooigereedschap voor hooggelegeerd staal! Gereedschap wordt opgeborgen in een verplaatsbaar rek dat aan de machine kan worden bevestigd. De operator kan vervolgens handmatig boven- en ondergereedschap in de machine plaatsen en eruit halen. Capacity: 500 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2850 mm Max stroke: 400 mm Max distance between table -- ram: 890 mm ...
fully functional ejectors on the table need to be checked; they haven't used by the Seller. The press operates without the need for immediate investment. Auction-ID: A7-50633-3
Equipped with 10 crimp sets; unused Auction-ID: A1-47362-93
crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-50534-346
crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-50534-347
CONTROLS PLC PRESS DESIGN quick die change system: yes SLIDE total force (nominal): 630 to stroke: 125 mm V-RING nominal force: 320 to TOOL DIMENSIONS lower table (left-right): 800 mm lower table (front-back): 800 mm shut height max.: 420 mm STRIP-FEEDER band lubrication system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6800 mm space requirements -front/back-: 3300 mm total height: 3730 mm height above floor level: 3005 mm height under floor level: 725 mm total weight approx.: 26000 kg ATTACHMENTS -FINEBLANKING PRESS- autom. tool clamping device: yes light barrier: yes decoiler: yes leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995) including belt system
CONTROLS PLC SIEMENS SIMATIC HMI SLIDE total force (nominal): 320 to stroke: 200 mm COUNTER RAM nominal force: 63 to V-RING nominal force: 100 to TOOL DIMENSIONS shut height max.: 360 mm DIMENSIONS / WEIGHTS total weight approx.: 18000 kg The system was fitted with a new control unit approximately 1.5 years ago including belt system Inkl. Decoiler Schmid HR10
Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1900/1800/H4200 mm -Weight: kg
Vatan Otomasyon / VEEOS U.P.H.K.P. 010 Four-Column Hydraulic Press Four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Four-column hydraulic press with hydraulic power unit, reservoir, motor, pressure gauges and control system Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,200 × 2,300 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-11
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Rated capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic upper ram, guided moving platen, T-slotted working table, separate hydraulic power pack with reservoir, valve block and pressure gauges, safety guarding and operator control/HMI Control system: Gani Otomasyon, project no. 14276177 Working table: Approx. 880 × 800 mm Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,300 × 2,400 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-13
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2022 Serial number: U.P.H.K.P. 1750 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 125 A Maximum main fuse: 125 A Electrical control supplies: 380 V AC / 220 V AC / 24 V DC Configuration: Four-column construction with hydraulic power unit, guarded working area and control cabinet Control system: Gani Otomasyon, project no. 16465453 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,200 kg All descriptions are indicative only. Auction-ID: A1-50546-15
Uğursan U.P.H.K.P. 010 Four-Column Hydraulic Rubber Press Four-column hydraulic press for rubber processing and controlled compression operations. Manufacturer: Uğursan Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Rated capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Upper hydraulic ram, guided moving platen, T-slotted lower working table, hydraulic power pack with reservoir, valves and pressure gauges, safety guarding, HMI/operator controls and stack light Control system: Vatan Otomasyon / VEEOS Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-12
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Serial number: U.P.H.K.P. 1010 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic power unit, heated upper and lower platens, HMI operator control, safety guarding and hydraulic oil system Control system: Gani Otomasyon, project no. 14276033 Hydraulic oil: Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-14
maximum number of results exceeded
please refine your search
