hydraulic press used for sale

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...

pressure: 6 t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 600 mm stroke: - mm total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t distance between columns: 550 mm stroke: 150 mm total power requirement: 11 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 y 3 x 2,5 m No. 4105 Hydraulic press Compressive force max. 600 kN Ram stroke 150 mm Weight approx. 4500 kg Table 500 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 € : 1130.22 € : 100 to : 400 mm : 800 x 500 mm : 500 mm : 110 mm/s : 10 mm/s : 160 mm/s : 11 kW : 1900 mm : 1700 mm : 2930 mm : 5500 kg : 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created wi ...

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7305 : prompt, Zwischenverkauf v : Italien : 46400 € : 886.24 € : 1 : 100 to : 500 mm : 700 x 350 mm : 800 x 600 mm : 500 mm : 300 mm : 25 mm/s : 4 mm/s : 4 kW : 1900 mm : 1200 mm : 2600 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 € : 2608.2 € : 170 to : 500 mm : 870x500 mm : 1000x600 mm : 600 mm : 300 mm : 110 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 19 kW : 1500 mm : 1950 mm : 2650 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Türkei : 66900 € : 1264.41 € : 60 to : 250 mm : 550 x 850 mm : 600x1000 mm : 500 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2750 mm : 5300 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 72500 € : 1370.25 € : 35 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 125 mm/s : 43 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1400 mm : 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Press Dunkes HEZ100-400 BJ 1995

Hydraulic Press Dunkes HSZ 63 BJ 1999

DUNKES HS 4-40/20 ist eine hydraulische Presse für Präzision, hohe Genauigkeit und Zuverlässigkeit. Daten: Presskraft 40 t (400 kN), Hublänge 300 mm, 4-Säulen, Tisch 650×650 mm; Hilfszylinder 30 kN, Hub 100 mm (2 Stufen). Technisch: Betriebsdruck 260 bar; Hubgeschwindigkeit 33–120 mm/s, Rücklauf 450 mm/s; Öl 300 l; Anschluss 3×380 V 50 Hz; Motor 15 kW; Gewicht ~5200 kg; Abmessungen L1750×B1200×H3500 mm. Ausstattung: Sicherheitsvorrichtung, Ziehkissen pneumatisch; diverses Zubehör. Sichert enge Toleranzen; Einsatz: Automotive, Luftfahrt, Medizintechnik, Maschinenbau, Uhrenindustrie. Technische Daten ohne Gewähr

TRANEMO DPA-H-400-16 ist eine Hydraulische Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Presskraft 4000 kN, Hublänge 1250 mm, Tisch 1600×1000 mm; Ausstosskraft 300 kN, Hub 250 mm. Technische Daten: Eilgang 382 mm/s, Pressgang 18 mm/s, Rücklauf 365 mm/s, Motor 45 kW, Anschluss 3×380 V 50 Hz, Gewicht ~33000 kg, Maße L3600×B2600×H6400 mm. Zubehör: hydraulisches Ziehkissen, Zylinderkraft 2000 kN, Hub 315 mm. Ermöglicht enge Toleranzen; Anwendungsbereiche: Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

TOX PC 030.079 ist eine hydraulische Presse, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Presskraft 20–300 kN; Hublänge 100/70 mm; Krafthub 22/6 mm; Stösseldurchmesser 30/63 mm; Ausführung 2 Ständer. Technische Daten: Anschluss 3x 380 V 50 Hz; Luftanschluss 6 bar; Gewicht ca. 1900 kg; Abmessungen L1300 x B900 x H2400 mm. Ausstattung: Zweihandauslösung. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

JENNYDENISON T 4 ist eine Hydraulische Presse mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Leistungsdaten: Druck 4 t, Hub 200 mm, Tischfläche 290×230 mm, Stößel min 0 / max 250 mm, Ausladung 118 mm, Stösseldruck 4000 kg. Technische Daten: Anschluss 3×380 V 50 Hz, Gesamtleistung 3 CV, Gewicht ~400 kg, Abmessungen L900×B700×H1800 mm. Geeignet für enge Toleranzen; typische Einsatzbereiche: Automobil, Präzisionsmechanik, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

SWISSTOOL ist eine Hydraulische Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Druck 15 to; Hublänge 160 mm; Tisch Länge 950 mm, Breite 140 mm; T-Nutenbreite 10 mm; Ausladung 280 mm. Technische Daten: Maschinengewicht ca. 300 kg; Abmessungen L 1000 x B 800 x H 2000 mm. Zubehör: diverses Zubehör und Sockel. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

CMP 100 TOPN ist eine Hydraulische Presse, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Arbeitsdaten: Gesamtabmessungen HxBxT 1700 x 2300 x 950 mm; Maschinengewicht ca. 600 kg. Technische Eckdaten: kompakte, stabile Bauweise für stationäre Belastungen. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

STENHOJ ist eine Garagenpresse (hydraulische Presse), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten (Hub, Kraft, Werkstückmaße) richten sich nach Ausführung und Anwendung. Technische Daten variieren je nach Modell und Ausstattung. Erzielt enge Toleranzen; typischer Einsatz in Kfz-Werkstätten, Fahrzeugwartung und industriellen Werkstätten. Technische Daten ohne Gewähr

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

elektrische achteraanslag elektrische diepteregeling amada tooling opname bovenaan Buigvoorbeeld: 10 mm over een lengte van 3 meter Capacity: 160 ton x 3100 mm Backgauge: elec Max stroke: 300 mm Depth of throat: 340 mm Table width: 200 mm Length: 3400 mm Depth: 2000 mm Height: 2600 mm Weight: 8 ton Capacity: 160 ton Bending length: 3100 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 104800 € : 1980.72 € : 150 to : 500 mm : 950 x 650 mm : 1200 x 750 mm : 750 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3650 mm : 9500 kg : 254 bar : 32 to : 200 mm : 120 mm : 160 bar : 40 mm/sec. : 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 € : 2211.3 € : 125 to : 500 mm : 800 x 400 mm : 900 x 600 mm : 600 mm : 300 mm : 115 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 15 kW : 1400 mm : 1950 mm : 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 79500 € : 1502.55 € : 60 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 120 mm/s : 38 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1500 mm : 2350 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1181.25 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 300 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil c ...

pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details.

The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible.

Key data: 500 t

Manufacturer: BUCHER-GUYER Model: AEBI 500 Year: 1969 Condition: Used Stock number: 9455 Control system: SIMATIC S 5 (CPUS 115) Compressive force: 500 t Piston diameter: 525 mm Piston rod diameter: 498 mm Stroke length: 412 mm Machine weight: 18000 kg The press underwent a complete overhaul in 1992 (hydraulics and control system). Equipment: Technical documentation Hydraulic power unit Switchgear

4 assen: Y1 / Y2 / X / V Capacity: 200 ton x 3650 mm Backgauge: CNC Control: Delem Passage between uprights: 3100 mm Electric motor (power): 17 kW Weight: 16,5 ton Capacity: 200 ton Bending length: 3650 mm

Manufacturer: Hidroliksan Year of Manufacture: 2022 Model: HSA Type of Machine: Hydraulic Press Technical Details - Capacity: 200 Ton - Power / Motor: 30 Kw - Working Voltage: 380 Volt - Frequency: 50 Hz - Max Current: 75 Amp - Work Pressure: 225 Bar - Cylinder Diameter: 320 mm - Stroke Length: 450 mm - Pump: 103 lt/min - Oil Capacity: 750 lt - Ram Table Advance Speed: 160 mm/sn - Ram Table Return Speed: 250 mm/sn - Mold Dimensions Max: 1600 x 1400 mm - Mold Weight Max: 5000 Kg - Machine Weight: 18000 Kg - Dimensions: 3650 x 3400 x 5000 mm

Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

Machine number: H85-1461 Operating voltage: 380 V Frequency: 50 Hz Directing force: 1600 kN Straightening stroke: 160 mm Drive power: 22 kW Ram speed: from 62 mm/s Ram speed: 162 mm/s Radius standard: 400 mm Table dimensions: approx. 8500 x 440 mm incl. extensive item Suitable accessories such as various inserts and pressing tool Operating hours read: 4043 Auction-ID: A7-49089-245

CONTROLS   PLC LAUER SLIDE   total force (nominal): 320 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s COUNTER RAM   nominal force: 63 to   stroke: 30 mm V-RING   nominal force: 100 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 650 mm DECOILER   sheet width max.: 250 mm   sheet width (min): 40 mm   coil weight max.: 1250 to   max. diameter of coil: 1300 mm LEVELLER UNIT   sheet width max.: 250 mm   sheet thickness max.: 5 mm   sheet thickness min.: 0.8 mm   number of leveller rolls: 11   feed velocity min.: 4 m/min   feed velocity max.: 12 m/min STRIP-FEEDER   feeder type: grip feeder   she ...

3 assen: Y1 / Y2 / X Capacity: 160 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2550 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 79 mm/sec Electric motor (power): 14 kW Length: 3500 mm Depth: 2350 mm Height: 2850 mm Weight: 9 ton

LVD PPEB 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: Cadman B Touch Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 570 mm Depth of throat: 400 mm Table width: 200 mm Locking speed: 120 mm/sec Working speed: 14 mm/sec Returning speed: 130 mm/sec Electric motor (power): 42 kW Length: 8000 mm Depth: 3200 mm Height: 3775 mm Weight: 36 ton Capacity: 320 ton Bending length: 6100 mm

The machine is in good technical condition; it can be tested by prior arrangement.

LVD-gereedschap 4 assen: Y1 / Y2 / X / R 2 beweegbare plaatsteunen Capacity: 80 ton x 2100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 1550 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 130 mm/sec Working speed: 10 mm/sec Returning speed: 113 mm/sec Electric motor (power): 12,5 kW Weight: 6 ton Capacity: 80 ton Bending length: 2100 mm

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 185 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 2400 mm Height: 2850 mm Weight: 12 ton Capacity: 200 ton Bending length: 3100 mm

AXIAL PHA-653 Hydraulic Press Brake Year: 2001 Machine No.: 010653181 Bending force: 65 t Maximum folding length: 3,000 mm Stroke: 100 mm Hydraulic unit: ATOS Motor power: 4 kW Power supply: 380 V / 50 Hz / 3 phases Maximum Intensity: 10.5 A Pressure: 245 kg/cm² Approach speed: 100 mm/s Working speed: 9 mm/s Return speed: 90 mm/s Weight: 4,500 kg Auction-ID: A7-49809-5

Hydraulic Press Tränklein ZP 39 Hydraulische Presse - Hydraulic Press Tränklein ZP 39 Serial-No. 24088 1 Pressplatte / 1 pressure plate Size with max. 520 x 400mm Stapelhöhe / Stack height max. 360mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 400kg

big Hydraulic Press Lechner ST USTIA große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Druck stufenlos regelbar / Pressure steppless

The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg

Control: Simatic HMI Touch Operating Modes Setup and Single Stroke 2 side tables Support surface 850x500mm with hydraulic ball bars for heavy workpieces Auction-ID: A7-50158-3