hydraulic press used for sale

Baier GEBA 1/F embossing press, Embossing plate: 70 x 90 mm, Embossed pressure: 600 kg, Work table: 620 x 620 mm, Embossing plate: 70 x 90 mm, Embossed print: 600 kg, worktable: 620 x 620 mm

Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details.

Available hydraulic press brake with el. Stop adjustment Power: 380V, 4kW, 9A, 50Hz

Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.

It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)

Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.

Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg

Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's spec ...

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Telemecanique - Batch of pressure switches, rail-mount terminals and safety components Condition: unused QTY: XMLBL05R2S12EX 11x QTY: AB1VVN1635U 3x QTY: ZB2-BV185 16x QTY: XUSL4E2BB051L 4x Auction-ID: A1-46070-123

Automatic complete impregnation system IWT, B.J 2002. Diameter 1.8 m. Length 18 m. Impregnation including impregnating agent container. Including all pumps. System can be set at an angle, inlet on both sides.

Capacity, ton 1000 Course stroke, mm 170 Number of strokes per minute 32 Shut height, mm 470 Table size, mm 800 x 800 Weight, kg 26000 The presses are in working condition. Complete

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz

Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

\" mixed lot of gas struts / gas pressure cylinders for tool and mold making. It mainly contains branded components from FIBRO, plus Bordignon (High Performance Line) and other identical designs. The parts come from stock, mostly unused, partly with traces of storage or use. Several cylinders are still packed protected (net / bag). Scope of delivery • complete lot as shown • approx. 38 pieces of gas struts / cylinders (according to the marking) • incl. protective packaging • no individual sale • Manufacturer: FIBRO, Bordignon • Type: Gas Pressure Spring / Gas Pressure Cylinder • Filling Pressure: • 150 bar • 180 bar • Spring Forces (depending on model): • e.g. 350 daN • 550 daN • 750 daN • Versions: • Various diameters and lengths • Short and long designs • Article/order numbers include: • FIBRO 2480.12.03000 • FIBRO 2487.12.00350.063 • FIBRO 2 ...

Manufacturer: Hydrap Model: HPSK 80 Year of Manufacture: 1994 Type of Machine : Hydraulic Press Condition: Used Operating hours: 27,436 h Press Performance - Nominal force: 800 kN - Maximum ram stroke: 300 mm - Overrun distance: 30 mm - Overrun time: 120 ms - Safety distance: 196 mm - Drive type: Hydraulic - Press orientation: Vertical - Number of cylinders: 1 - Cylinder diameter: 210 mm Working Area - Throat depth to ram centre: 250 mm - Minimum daylight table to ram: 500 mm - Clamping table length: 700 mm - Clamping table width: 500 mm - T-slots to DIN: 650 mm - Slot width: 22 mm - Slot arrangement: Diagonal - Clamping plate thickness: 150 mm Electrical Data - Voltage: 400 V - Frequency: 50 Hz - Current type: DC - Drive power: 22 kW - Rated current: 45 A - Mechanical Data - Weight: 6.5 tonnes - Oil viscosity: HLP 46 - Oil quantity: 485 litres Find more here - / Contact us  ...

CONTROLS   conventional PRESS FORCES   total force (nominal): 75 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 1110 mm SLIDE   table surface (left-right): 960 mm   table surface (front-back): 750 mm SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 120 /min   stroke rate (max.): 600 /min STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS   total power consumption: 15.5 kW DIMENSIONS / WEIGHTS   total weight approx.: 13500 kg ATTACHMENTS (PRESSES)   strip feeder: yes   feeder type: roll feeder

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

Used for applying heat and pressure to bond or process materials. Auction-ID: A7-46462-49

Pressotherapy 3-in-1 is an advanced cosmetic and medical device that combines three different technologies in a single treatment, offering comprehensive body care. The device includes: lymphatic drainage (pressotherapy), infrared (IR), and electrostimulation (EMS). Auction-ID: A7-46406-12

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Designed for molding and pressing the upper in the heel area of the shoe. Auction-ID: A7-46462-3

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Thermal adhesive activator Auction-ID: A7-46462-4

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

2 - the black and white Auction-ID: A7-46462-51

Used for applying heat and pressure to bond or process materials. Auction-ID: A7-46462-18

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

Manufacturer: Presona Model: LP50EH2ECC Year of Manufacture: 2021 Type of Machine : Baler Year of commissioning: 2022 Pressing force: 500 kN Pressure: 25 MPa Certification: CE marked Control System - PREMI 50 The machine is equipped with a PREMI 50 PLC control unit featuring a 7 inch colour touchscreen. It allows full parameter settings for the press and displays production data for up to 15 press programs. The PREMI 50 includes an internet interface for remote monitoring,diagnostics, and production data access via a secure internet connection from any computer. Find more here - / Contact us at -

A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible.

pressure: 230 t throat: 345 mm stroke: 40-160 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 1000x660mm mm ram surface: 700x500 mm table height: 800 mm tool hole in ram: Ø65 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Closed press basket, steel, coated - Tank capacity: 30hl - Last use: 2025 harvest - Membrane: PVC, 2018 - Juice pan : Large stainless steel tub, Version «Drawer with suspension, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in working condition Dimensions: - Length: 4500 mm - Width: 1900 mm - Height: 1600 mm (without wheels)

Briquetting press Reinbold RB 50 SV – Top condition, ready for immediate use! Only 410 hours of running. For sale is a high-quality briquetting press from Reinbold Entsorgungstechnik GmbH – ideal for woodworking, carpentry or industrial operations, the machine is immediately ready for use. Technical data: Model: RB 50 SV Motor: 5.5 kW Voltage: 400 V (high current) Current: 16 A Frequency: 50 Hz Briquette diameter: 60 mm Hydraulic pressure: 160 bar Highlights: ✔ Robust industrial quality ✔ Reliable & durable technology ✔ Easy to use ✔ Space-saving design ✔ Saves disposal costs ✔ Produces usable fuel briquettes For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and ...

Pressure 100 t Stroke 220 mm Clear width between uprights 1190 mm Installation height 700 mm Cylinder diameter 190 mm Piston diameter 120 mm Table surface 1600 x 800 mm Machine weight approx. 1.3 t Dimensions approx. 1.9 x 1.4 x 2.0 m Auction-ID: A7-46460-478

Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.

We are selling a complete used strip processing line consisting of 6 machines offered together as a fully automated coil-to-press production system.Machines 1 to 3 form a strip processing unit with a shared control cabinet and hydraulic system with a total power of 35 kW. Common Material Specifications • Material grades: St 37, St 52, bright and galvanised • Material thickness: 1.0 mm to 6.0 mm • Material width: 50 mm to 500 mm • Maximum material cross-section: 1500 mm2 Machine 1 • Type: decoiler with expanding mandrel • Manufacturer: ARKU • Model: AH 5000/600/MSG-4Q • Year of manufacture: 2002 • Condition: used, operational, very good • Maximum coil weight: 5 tonnes • Maximum coil diameter: 2000 mm • Expanding range: 470 mm to 530 mm • Weight: 5500 kg • Special features: hydraulically driven expanding mandrel, pressure arm, and roller Machine ...

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

R410A refrigerant Quantity 6.3 kg Power 14 kw DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-22

Slide size 900x700 mm Slide stroke 600 mm Opening between the posts 800 mm Worktop size 900x700 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-16

Slide size 1220x1070 mm Slide stroke 400 mm Shots per minute 15 Opening between the uprights 1270x450 mm Worktop size 1220x1070 mm REEL Max reel width 500 mm RECTIFIER Max belt width 500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-2

Slide size 1100x750 mm Slide stroke 200 mm Strokes per minute 10 - 50 Max mould height 570 mm Worktop size 1300x800 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-15

Slide size 850x600 mm Slide stroke 14-180 mm Strokes per minute 40 Min height between table and slide 500 mm Worktop size 1300x800 mm Revamping of the electrical system 2007 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-9

Slide size 1600x1200 mm Slide stroke 800 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1200 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-14

Equipped with working pressure: 195bar – 19.5Mpa; Maximum pressure: 200bar – 20Mpa; Capacity: 900 l/h – 15 l/min; Maximum temperature: 140°C - 284°F; burner power: 48.1 kW; motor power: 5.5 kW; Power supply: 400V/50Hz; fuel: diesel; weight: 118kg; Unused (115x74x105cm transport size) Auction-ID: A1-40137-359