129,524 used machines on RESALE, but how to find them? Machine Search
Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation
Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - CE Standard Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400
Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500
Tincture press Manufacturer: Hubert Schwanke/Fischer Type HP-25 Serial No. 51-57 Mobile undercarriage Separation of liquid and substance under pressure Capacity approx. 25 litres Output depending on the pressed material max. 80 litres/h Hydr. High pressure max. 450 bar, min. infinitely adjustable on the pressure switch from 0 bar Total pressure on pressed material area 25.5 t Spec. Surface pressure for normal strainer 450 bar = 29 kg/cm² Hydraulic oil quantity in storage tank max. 17 litres Hydraulic Oil Type: Shell Ondina 17 Hydraulic oil change: after approx. 2000-3000 operating hours or according to the degree of contamination of the oil Hydraulic Oil Pump 2 Stage High Pressure And Low Pressure Pump Type RZ 0,6/2-12,3/W.FL.250 Flow rate double solenoid valve 1 Two-stage valve: Type NE 20-450/30 set to 470 bar 1 ...
Vacuum press, vacuum table, membrane press Vacuform from Columbus Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. Natural rubber membrane, rubber membrane, extremely stretchy and easy to clean. Frame inner dimensions approx. 2920 x 1320mm Vacuum pump Becker, 400V, 0.75 kW with 25 m³/h output Large vacuum container, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run continuously. Mobile on four swivel castors, lockable Work surface folds down for storage. CE mark Original paint, only a few places touched up Very good condition, see original photos Machine is immediately ready for use Dimensions approx. 316 ...
Pressure Switch ORSTA D5 CO 3 ( D5CO3 ) TGL 10952 New ! Dimensions: 180 x 65 x 75 mm
Pressure relief valve, hydraulic valve ORSTA CDS 16 - 2 - 02 TGL 10947 used, tested ! Dimensions: 170 x 80 x 45 mm
Pressure relief valve, hydraulic valve ORSTA CDS 16-3-02 TGL 10947 Nominal pressure: 16 MN/m² used, tested ! Dimensions: 140 x 45 x 45 mm
Pressure relief valve, hydraulic valve ORSTA CNS 16-2-02 TGL 10947 Nominal pressure: 16 MPa used, tested ! Dimensions: 160 x 80 x 45 mm
Pressure Switches ORSTA D5 CO L32 ( D5COL32 ) TGL 10952 Dimensions: 150 x 65 x 65 mm New !
Pressure reducing valve, hydraulic valve ORSTA 06-20.01/0 TGL 26234/20 Dimensions: 100 x 35 x 35 mm
Pressure reducing valve, hydraulic valve ORSTA AS 16-2-01 TGL 10950 Nominal pressure: 16 MPa Dimensions: 220 x 130 x 70 mm
pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm
pressure:10 t distance between columns:450 mm :1500 mm table-size:450 x 400 mm weight of the machine ca.:470 kg dimensions of the machine ca.:1400 x 750 x 1600 mm
Pressure relief valve, direct controlled, hydraulic valve REXROTH DBDS 6 P 12/200 Setting pressure up to 200 bar Dimensions 145 x 60 x 40 mm
pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg
Hydro-electric piston pressure switch REXROTH HE D1 KA 40/100 ( HED1KA40/100 ) max 460 V 15 A Dimensions: 200 x 95 x 45 mm
weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm
Pressure Relief Valve, Hydraulic Valve ORSTA CNS 10-2-02 TGL 10947 Nominal pressure: 16 MPa New ! Dimensions: 105 x 35 x 35 mm
Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm
nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m
nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m
no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m
Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool
Max. clamping force: 40kN, Jaw width approx. 125mm ; see photos for more details
Fernvorgest. Pressure reducing valve, hydraulic valve BOSCH 0811 145 004 Pv: 7 - 315 bar Pmax: 315 bar New ! Dimensions: 145 x 90 x 85 mm
Pressure Switch ORSTA D5 CO 1 ( D5CO1 ) TGL 10952 Pn 32 MPa Dimensions: 195 x 90 x 65 mm
maximum number of results exceeded
please refine your search
500 € 
