hydraulic press 250 used for sale

Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Refer to code 1174 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Key data: 3000 mm, 6 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Refer to code 1173 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca 2000, Length mm: 1.400, Width mm: 1.200, Total hight mm: 770, built-on roller conveyor: yes, FREE TEXT: 2 Stck vorhanden,

Refer to code 1184 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Wight approx. kg: ca 1800, Year :1993

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Year :1993

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca.3000, Length mm: 2800, Width mm: 2000, Total hight mm: 700, built-on roller conveyor: yes,

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972

Manufacturer: Scherenhubrollenbahn, Year: ca 2001, Length mm: 4800, Width mm: 710, Total hight mm: 260, Hand switch: yes, Safety strip: yes, Carriage: no, built-on roller conveyor: yes, FREE TEXT: Rollenteilung 80 40 Rolle, Year :ca 2001

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: Istel, Type: Hebevorrichtung Motorisch, Lifting power kg: ca.200, Length mm: 1600, Width mm: 790, Lifting hight approx. mm: 1100, Total hight mm: 250, Hand switch: yes, Safety strip: no, Total power kW: 1,1, CE-Sign: no,

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002

Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,

Hydraulic power unit with pressure accumulator

Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

Haco HSL 4100 x 12 mm Cutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

LVD MVB 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3300 mm Strokes/min: 18 > 60 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 7,5 kW Weight: 6 ton

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

SC7 CNC-besturing: - automatische snijhoek - mes spel automatisch - automatische achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 12 ton

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 12,5 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. The data for th ...