hydraulic press 250 used for sale

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 25 mm -Diameter eyes: 25/30 mm -Stroke: 90 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 62/62/H330 mm -Weight: 5.1 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 44/44/H595 mm -Weight: 3.1 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Electric motor: 80 V with 2 hydraulic pumps -Power: 2.2 kW -Speed: 1480 rpm -Dimensions: 340/290/H590 mm -Weight: 45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: mm -Piston rod: Ø 35 mm -Stroke: 750 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 24 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston: Ø approx. 35 mm -Piston rod: Ø 20 mm -Stroke: 40 mm -Dimensions: 65/65/H380 mm -Weight: 3.75 kg

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 16 mm -Stroke: 260 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 457/43/H38 mm -Weight: 2.45 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 12 mm -Stroke: 50 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 242/43/H38 mm -Weight: 1.37 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 38 mm -Piston rod: Ø 25 mm (M20 x 1.5 mm thread) -Stroke: 60 mm -Pressure: 70 bar -universally applicable: -Dimensions: 224/86/H53 mm -Weight: 2.5 kg

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

sheet width: 3200 mm plate thickness: 6 mm distance between columns: 3200 mm throat: mm back stop - adjustable: 20 - 600 mm down holder: dimensions: ca. 4010 x 1610 x 1620 mm engine output: 7,5 kW Control: eView weight of the machine ca.: 7,2 t CNC swing cut panel shears 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Hydraulic pump, oil pump, gear pump -Drive: 2.2 kW 1420 rpm -Dimensions: 550/280/H260 mm -Weight: 40 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Admission wheel recess: Ø 160 mm -universal: applicable -Number: 2x motors available -Price: per piece -Dimensions: 190/190/H342 mm -Weight: 70 kg/piece

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg