136,440 used machines on RESALE, but how to find them? Machine Search
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/QBuFWMRS_5U - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 24V 240Ah, voltage measured at rest with 24.6V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - with charger Auction-ID: A1-50765-374
New tyres from last year. Approx. 3000km-4000km back serviced including: new battery, all filters, truck-mounted crane,..' Air suspension at the rear, leaf feathers at the front. Eev engine, can go to euro6 by installing a particulate filter. Faucet is 2x extendable. Auction-ID: A3-46132-6025
REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-50765-3441
Automatic transfer panel for three-phase 250kVA generators, Maximum power connection rating: 250 kVA, Generator monitoring connection: Three-phase connector, Frequency: 50/60 Hz, Maximum current: 550 A, Maximum voltage: 1000V. Auction-ID: A1-50595-21
Oak dance floor – approx. 40.4 m² – 5,250 x 7,700 mm Specifications: Execution: oak dance floor Dimensions straight floor surface: approx. 5,250 x 7,700 mm Surface area straight floor area: approx. 40.4 m² Dimensions measured to the end of the straight floor surfaces Thickness of oak planks: approx. 10 mm Oak planks mounted on subfloor Width of transition edge: approx. 60 mm Rectangular design Features: Sloping wooden transition edge all around Transition edge for bridging the height difference with the surrounding floor Corners of edge finishing mitred Particularities: Signs of wear present Condition: Used Sold as set up and pictured The dance floor is currently fully assembled and set up Dismantling, any separation of the various floor parts and disposal are entirely at the expense and risk of the buyer Dismantling must be carried out carefully and ...
Diameter approx 3100mm, total height approx 4750mm, equipped with agitator Auction-ID: A1-50393-79
Features: 250D diesel engine Automatic gearbox 7-speed AMG exterior package AMG interior package 19-inch alloy wheels with winter tyres Parking package Mirror package Night package Sports seats Lumbar support Leather upholstery Climate control Electrically adjustable seats (partially) LED headlights LED taillights Front and rear parking sensors Rear camera Multimedia system Navigation Leather steering wheel Sport suspension Dimming interior and exterior mirrors Rain sensor Electrically folding exterior mirrors Black headliner Light sensor Tinted glass back Lighting package Front seat heating Digital service registration (online) completed and demonstrable. Auction-ID: A1-47420-16
Roto-Drive 360 hydraulic swivel adapter – Knikmops 130/250 – endlessly rotatable Specifications: Brand: Roto-Drive Version: hydraulic swivel adapter / rotator Suitable for: Knikmops 130 and 250 Drive: hydraulic Rotation: endlessly rotatable 360° Direction of rotation: left and right Hydraulic rotary motor Heavy-duty steel frame Condition: Used Features: Hydraulic hoses Hydraulic Quick Couplings Suitable as an intermediate adapter for various attachments Particularities: Can be loaded. Auction-ID: A1-47393-355
Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-77
Specifications: - Brand: Alpen Kreuzer - Model/Type: Super GT - Product type: trailer tent / tent trailer - Version: single axle - Baking size: approx. 250 × 160 cm - Color: white - License plate: not visible / not established - Year of construction: not fixed - Sleeping/tent area can be folded out Equipped with, among other things: - Complete fold-out tent/awning construction - Brown/beige tent cloth - Various tent poles and frame tubes - Storage space for tent poles - Fold-out sleeping/bed areas - Luggage/storage space - Lockable hard top panels - Single-axle chassis - Towbar coupling - Overrun brake - Handbrake - Nose wheel - Breakaway cable - Lighting - Rear lights - Reflectors - Side marker lights Kitchen unit: - Integrated kitchen - 3-burner gas stove - Stainless steel cooking area - Stainless steel sink - Water tap - Drain in sink - Worksheet - Gas connection / gas hose - Storage ...
Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-78
Two REMA and METABO benches See photos for more details The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-4
Soil bucket WS 2500 1.20 m³ Manitou Auction-ID: A1-50849-159
Bucket (V) 2300 mm KRA - 1.30 m³, KL33.8T/KL37.8T/8085T/8095T Auction-ID: A1-50849-218
Soil bucket WS 2500 1.20 m³ Manitou Auction-ID: A1-50849-160
Soil bucket WS 2500 1.20 m³ Manitou Auction-ID: A1-50849-163
Art. 5082 SW 9 / A/F 9 Article code: 90822212 250 Hanger bolts in accordance with DIN 6923, with EPDM seal Includes hex nut and washer Lot no.: 6222959 Auction-ID: A1-46380-821
Soil bucket RZ 2500 1,60m³ TPV, KL60.8/KL70.8KL55.8T/8155/8180/8145T Auction-ID: A1-50849-208
equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-50865-616
V: 380 A: 1.9 kW: 0.9 Mubea Model 3s/4L Hand lever shears / manual sheet metal shears Auction-ID: A7-50868-61
Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-155
Bucket capacity 2500 l Auction-ID: A1-50849-169
Soil bucket WS 2500 1.20 m³ Manitou Auction-ID: A1-50849-158
Lightweight Bucket 2500 2.50m³ Manitou - 3507/4507/5509 Auction-ID: A1-50849-154
equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-50865-617
Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-152
equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-50865-4023
Completely in stainless steel. ___ inside width 1700_ height 1850 Auction-ID: A3-46136-2863
Bucket capacity 1.5 m³ Auction-ID: A1-50849-286
Soil bucket WS 2500 1.20 m³ Manitou Auction-ID: A1-50849-162
Art. 5082 SW 9 / A/F 9 Article code: 90822212 250 Hanger bolts in accordance with DIN 6923, with EPDM seal Includes hex nut and washer Lot no.: 6222959 Auction-ID: A1-46380-822
Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-153
Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-156
Should still work, without diesel cases. Auction-ID: A3-46137-17557
Including license plate. Hours: 11000. LED headlights Auction-ID: A1-41962-43
Art. 5082 SW 9 / A/F 9 Article code: 90822212 250 Hanger bolts in accordance with DIN 6923, with EPDM seal Includes hex nut and washer Lot no.: 6222959 Auction-ID: A1-46380-820
B-stock of various hydraulic components, Rexroth A4VG90, including cylinders, pistons, drive shafts, bearings, and other components. approx. gross 220 KG incl. pallet 120x80x54 forklift available, inspection desired Auction-ID: A1-50807-9
A4VG56EP R902197682 Used Incl. pallet 60x80x45 65Kg forklift available, inspection desired. Auction-ID: A1-50807-2
B-stock of various used hydraulic components, Rexroth A4VG125 and 71, including cylinders, pistons, drive shafts, bearings, and other components. approx. gross 330 KG incl. pallet 120x80x54 forklift available, inspection desired Auction-ID: A1-50807-26
A6VM107EZ R902050713, A6VM140HA R902216763, Incl. pallet 60x80x40, 135Kg, Forklifts available, Viewing desired. Auction-ID: A1-50807-20
Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight
Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15
Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil
maximum number of results exceeded
please refine your search
2.300 € 
