hydraulic press 250 used for sale

Electric stacker YALE MS12X load capacity 1,250 kg built 2017 S/N C847T03198R, weight without battery 1,136 kg, 4 kW, battery 254 - 306 kg, 24 V, lifting height 2,768 mm, mast height approx. 1,750 mm, passenger platform

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-65

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-66

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-63

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-67

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-69

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-64

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-68

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-70

maximum cutting diameter: ø 250, arm lifting: Manual, arm lowering: Smooth feed (actuator), band dimensions: 2910 x 27 x 0.9 mm, band speed: 2 speeds (40 / 80 m/min), angled cutting: right 0° - 45° - 60°, vise: manual, quick-clamping (eccentric) Auction-ID: A7-45896-4

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3441

Type: Compact tractor Make: Foton Model: 2500 4WD Year: 2004 Engine: Diesel, 3-cylinder, water-cooled Power: approx. 28 HP (≈19.7 kW) Rated speed: approx. 2,350 rpm Displacement: 1,694 cc Transmission: Manual gearbox Gears: 8 forward / 8 reverse Drive: 4x4 selectable (4WD) PTO: 540 / 1000 rpm Hydraulics: Rear hydraulic system with auxiliary valves 3-point linkage: Category I Steering: Power steering Fuel tank capacity: approx. 20 L Dimensions & chassis: Wheelbase: approx. 1,743 mm Front track: approx. 1,215 mm Rear track: approx. 1,100 – 1,350 mm Ground clearance: approx. 254 – 348 mm Turning radius: With brake: approx. 2,600 mm Without brake: approx. 3,000 – 3,100 mm Application: Suitable for agriculture, gardening, landscaping and light-duty farm work Remarks: Compact and maneuverable tractor, compatible with vario ...

Pallet rack white 2 stands each approx. 250x80 cm, 2 pairs of trusses each 270 cm, without contents, approx. 9 pallet spaces incl. floor spaces, is lifted through the ceiling by means of a 2 to chain hoist

Pallet rack white 2 stands each approx. 250x80 cm, 3 pairs of trusses each 360 cm, without contents, approx. 16 pallet spaces incl. floor spaces, is lifted through the ceiling by means of a 2 to chain hoist

Pallet rack grey 4 stands each approx. 250x80 cm, 2 pairs of trusses each 270 cm, 4 pairs of trusses each 360 cm, wooden shelves, without contents, approx. 31 pallet spaces incl. floor spaces, is lifted through the ceiling by means of a 2 to chain hoist

Work table approx. 250x200 cm steel tube frame Thermal transfer printer CAB Squix 2 welding machines TELSONIC Ultrasonic Handystar, 35 kHz, ultrasonic converter IBFM UBG612, handheld devices

Work table approx. 250 cm, simple design, superstructure, thermal transfer printer

Belt conveyor belt SCHOLZ AMN 3500x585 approx. 250 cm, 400V 50Hz, S/N 080070404.0, superstructure

Spectrophotometer KONICA MINOLTA CM-2500c CT and CM-700d, S/N 11010825

Chevrolet silverado; 4x4 high/low ; air conditioning; electric windows/mirrors; seat heating; electric seat adjustment; cruise control! Radio CD Auction-ID: A1-42014-142

Equipped with 250W; Battery: 48 V 30 Ah lithium-ion (replaceable); Battery capacity: approx. 1440 Wh; Top speed: 25km/h; 19-inch wheels; disc brakes; Shimano 7-speed gears; LCD display; LED headlight, taillight; unused in box (Transport sizes 1565x280x880mm Weight 64.5KG) Auction-ID: A1-40105-906

For screwing steel or aluminium profiled sheets. 1 carton of 250 pieces. Auction-ID: A1-45977-231

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-240

Gilnhammer G40 Circular Elements approx. 90° white white Height 3000 mm 4x Height 2500 mm 3x Partly with cutouts Auction-ID: A1-45889-600

Packaging box for Gilnhammer boards made of OSB 2.50 m x 0.6 x 1.22 m For 15 plates Without castors Content see pictures there list Auction-ID: A1-45889-2913

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-237

KVH 80x140mm approx. 50 pieces 2500mm + Leftovers Auction-ID: A1-45889-2749

16x 1000mm 1x 960mm 1x 920mm 1x 500mm 1x 460mm 1x 420mm 2x 300mm Auction-ID: A1-45889-2867

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-239

Can only be used as system construction panels – no view quality For example, with a frame or similar, mostly still functional Length 2500mm 12 x 1000mm 4x various widths Colour: white/white Panels with damage Scratches, cracks, holes Auction-ID: A1-45889-2899

X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC Auction-ID: A1-45752-5

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-45977-238

Gilnhammer Packing Handle for 24 Plates 3000mm x 1000mm https://www.gilnhammer.de/g40classic https://youtu.be/CD61COI2N5k Auction-ID: A1-45889-68

Circulation Coins Turkey 5 Kurus-2500 Lira 1957-1992 10 Pieces

Platform trolley FETRA load capacity 250 kg

Green plants 2x ficus cythitipula advertised approx. 250x250 cm, 1x anthurium scherzerianum

Manufacturer: Himoinsa Model No.: HSW-250 Power: 250 KVA / 200KW Speed: 1500 RPM Frequency: 50 Hz Voltage: 230/400 V Engine: Scania 6-cylinder D9 Turbo Diesel Operating hours: approx. 227 hours Generator: Leroy Somer Year of Make: 2005 Auction-ID: A1-46031-15

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 600 kN Clearance between Tie Bars: 370 mm x 370 mm Platelet Dimensions: 570 mm x 570 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 40 mm Shot Volume / Shot Weight: 188 ccm / 172 grams PS Injection Pressure: 1390 bar GENERAL DATA Motor: 15 kW Heaters: 5.5 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Service book: Yes Auction-ID: A7-45917-1

Auction-ID: A1-45737-10

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45901-617

Boom 7,000 mm lg hook height 2,700 mm, with electric chain hoist 250 kg. single-strand, Auction-ID: A1-45937-2320

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-45737-161

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45901-616

250 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Ind ...

250 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...

Working space: Max. swing diameter: 525 mm Max. turning diameter: 300 mm Max. turning length: 497 mm Bar work up to a diameter of max. 65 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 18.5 KW Constant torque: 350 Nm Spindle nose: A2 – 8 inches Spindle bore: 76 mm Spindle positioning c – axis: 0° - 360°/0.001° Tool turret: Number of tool positions: 12 (can be equipped with fixed and driven tools as required) Turret switching time: - 1st station: approx. 0.2 s Powered tools: Drive power: 3.7 KW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travels: Turret travel: x – Axle: 180 mm z – axis: 575 mm y – axis: 100 mm (+- 50 mm) Travel speed: Rapid traverse: x – axis: 30 m/min z – axis: 12 m/min c – axis: 400 rpm Feed range: x/y/z – axis: 0 – 5,000 mm/min c – axis: 1° - 2,000°/min Tailstock: Quill stroke: ...

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indu ...

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, high performance, ideal for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 250 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Designed for heavy industrial applications ✔️ Advantages: High reliability Siemens Energy optimization Precise motor control Suitable for many industrial sectors Auction-ID: A3-43519-38048

Chuck for self-centering lathe 3 + 3 jaws 250 mm, 1600 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 320 x 320 x 210 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-231