138,463 used machines on RESALE, but how to find them? Machine Search
The car starts and drives without any problems. Documents available, see photos for details. Auction-ID: A3-46102-4056
Maintenance booklet available, dealer serviced. Auction-ID: A1-47419-253
Kobzarenko Forestry Tiller 250 in heavy-duty professional version for demanding forestry, clearing and recultivation work. The machine is suitable for shredding wood, roots, bushes and stones and has been developed for use on powerful tractors. The large rotor, the hydraulic pressure roller and the robust design enable a high area output even under difficult operating conditions. The machine presents itself in an overall condition that is almost as good as new with only minimally recognizable signs of use. Equipment: · Working width 2.5 m · Exterior width 2.9 m · Double-sided flat timing belt drive · Rotor with 47 fixed carbide tools · Rotor diameter 610 mm · Hydraulic shredding flap with extra wide opening · Hydraulic pressure roller for material feeding · HARDOX Skids · Gearbox with freewheel · Protective chains front and rear · PTO Shaft · Suitable for trac ...
Auction-ID: A1-48746-200
3-jaw chuck, three-jaw chuck with outer jaws PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm Bolt circle:134 mm height with jaws: 123 mm chuck number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 Extra Jaws
Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
According to photos, weight estimated Auction-ID: A1-50541-135
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
ELBOR MAG - Wire Electrode Type SG-3 Condition Mint EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5. 18-05: ER70S-6 Diameter 1.0 mm 250 kg - Drum approx. 230 kg still available in the barrel
Replacement column for IDRA 2500, extendable, D300mm x 7360mm, (1), 181091, Idra, refurbished Special price Replacement column for IDRA 2500, D300mm x 7360mm,Trapezoidal thread 300 x 10, 4082 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Idra, refurbished Special price Replacement column for IDRA 2500, D300mm x 7115mm,Trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Idra, new Special price Replacement column for IDRA 2500, D300mm x 7115mm, Trapezoidal thread TR300 x 10, 3944 kg New! The column has been produced from Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Clamping Force: 200 ton
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 35 T, NOW IN STOCK, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations
Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK
DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal
Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...
The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details:, - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Paks carton systems., - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format., - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity., - Features:, - High efficiency and low waste during the filling process., - Flexibility to switch between different carton formats and sizes., - User-friendly interface for easy operation and monitoring., - Applications: Ideal f ...
DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg
Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Electric chain hoist with: chassis -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Hakenweg: 3.4 m -Dimensions: 385/500/H800 mm -Weight: approx. 40 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 50-250 rpm -Motor: adjustable -Drive shaft: Ø 28 mm -Brake -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 655/200/H250 mm -Weight: 28 kg
Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PKV1-V1-F4 -Load capacity: 125/250 kg -Main lift: 8/4 m/min -Fine stroke: 2/1 m/min -Number: 2x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15 kg/pc.
Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PK1L -Load capacity: 125/250 kg -Main lift: 12/6 m/min -Fine stroke: m/min -Number: 1x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15kg
Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg
maximum number of results exceeded
please refine your search
3.900 € 
