hydraulic press 250 used for sale

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

max. wheel diameter: 2500 mm gear width: 1200 mm max. module: 32 min. module: 3 total power requirement: 25 kW weight of the machine ca.: 60 t dimensions of the machine ca.: m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with ...

cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system  ...

: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

The SIP 250-10 propeller pump is the ultimate sewage bypass pump!, The design of our SIP 250-10 is extremely compact, and the entire unit is fully self-contained. Equipped with a 500-liter fuel tank, it is designed to perform in and, under the most demanding and sometimes remote conditions., , The pump and housing are made of 2026, , Type………………………………….SIP 250-10 Diesel, Diameter……………………120 mm (4¾ inches), Max. capacity……………………950, Max. head………………………… 38 m, Max. vacuum…………………9.8 m , Engine………………..……….…….JCB 444 TA4 (55 kW), Suction/discharge…………….10 inches, Weight…………………….…………3,350 kg, , Throughput capacity: 950 m3/h, Max dirt passage: 120 mm, Max. head: 37 MWK, Max dirt passage: 1500 rpm, Weight: 3350 kg, , = More information =, , Year of ma ...

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: . mm control: Mazatrol 640 T x-travel: 190 mm y-travel: 1000 mm z-travel: 575 mm turning speeds: 4000 U/min feed: 30 m/min number of tools: 12 bar loader: nein total power requirement: 18,5 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: 5600x2100x2200 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for thi ...

faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...

arm length: 6000 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 6000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2550 mm y-travel: 900 mm z-travel: 1200 mm Control: Heidenhain type: 355 table surface area: 2900x800 mm Center of spindle to wall or column: 1000 mm spindle taper ISO: 50 : chip conveyor: tool clamping electrical: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data fo ...

workpiece length: 2700 mm swing dia.: 630 mm clamping length: 2700 mm stroke position adjustment: 40-130 mm grinding wheel diameter: 1000 mm total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data a ...

faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cre ...

faceplate diameter: 2500 mm swing diameter: 3200 mm turning height: 3100 mm Control: R&D type: MTC 2x-2 workpiece weight: 20000 kg slide adjustment: 1600 mm side head - cross travel: 1000 mm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Refurbished 1996 Many accessories Tool holders Jaws Jaw extensions The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your ...

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...

HEIDENHAIN Rotary Encoders and Angle Measuring Systems ROD 1424.039B/2500 ROD 1424.039B/2500 I/U ID No. 297252-32 HEIDENHAIN INCREMENTAL ROTARY ENCODER IN CAST HOUSING OUTPUT SIGNALS SQUARE-WAVE SIGNALS, TTL LEVEL ELECTRICAL CONNECTION RADIAL FLANGE SOCKET WITH CODING PIN (PIN 7) LINE COUNT 2500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created ...

grinding diameter: 420 mm grinding length: 2500 mm swing diameter: 870 mm centre distance: 2700 mm workpiece turning speeds: 1-164 U/min total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm turning diameter: 2500 mm turning speeds: 0,5-100 U/min max. workpiece weight -without tailstock: 6000 kg max. workpiece weight between centres: 25000 kg Plate area: mm turning diameter in the pit: 3200 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Te ...

faceplate diameter: 5300 mm swing diameter: 6300 mm turning height: 2800 mm slide adjustment: 1700 mm table load: 50 t turning speeds: 0,3-14 U/min Feed: 0,056-10 mm/U digital readout: Sony Rest: 2 Side head: chip conveyor: total power requirement: 120 kW weight of the machine ca.: 187 t dimensions of the machine ca.: m No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus H ...

sheet width: 2500 mm plate thickness: 4 mm distance between columns: . mm Control: rear stop: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filtration performance: . l/min fleece width: . mm temperature: . °C The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm Thickness: 240 mm T-slot - distance: 175 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Optional with 4 jaws €3750 With bed from Schiess KZ 250 Optionally, a Schiess KZ 250 drive gear can be purchased for €9,500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created ...

faceplate diameter: 2500 mm Thickness: 240 mm T-slot - distance: 175 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Optional with 4 jaws €3750 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Maximum working width: 250 mm 2 rollers: Ø 150 mm Installed power: 0.25 kW

TECHNICAL DATA: Maximum working width: 250 mm 2 rollers: Ø 150 mm Installed power: 0.18 kW

A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y ...

cutting diameter: 250 mm saw band length: 3600 mm cutting width: 300 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: flat: 250 x 300 mm capacity 90 degrees: square: 250 x 250 mm cutting speed: 20 - 100 m/min total power requirement: 2,05 kW weight of the machine ca.: 720 kg Metal Band Saw - Fully Automatic Features: - Manual stop with limit switch - Hydraulic clamping vise - Control panel - Stepless adjustment of band speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.

SAMPUTENSILI (Hurth Modul GmbH)S 2502002Siemens SINUMERIK 840D250 mm8 mm (hob)130 mm300 mm225 - 1800 rpm5 - 420 rpm22 kWHSK-A80+/- 45 degrees195 mm600 mm240 mm0.1 - 5000 mm/min0.1 - 2500 mm/min55 kVA80 A24 V DCdiameter 170 mm, bore 100 H7400 V, 50 Hz, 3N~3150 x 2520 x 2750 mmapprox. 11,000 kg (approx. 13,000 kg with ring loader)

: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 € : 250 x 40 x 51 mm : 1300 x 75 mm : 1,4 kW : 1400 1/min : 15 m/s : 42 mm : 600 mm : 540 mm : 1190 mm : 1200 x 800 x 1000 mm : 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1000 mm grinding length: 6000 mm swing diameter: 1400 mm turning length: 6000 mm workpiece weight: 20000 kg Speed: U/min. main drive DC: kW total power requirement: kVA weight of the machine ca.: - t dimensions of the machine ca.: - m - 4 open steadies - tailstock - DRO Heidenhain - chuck dia 900mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm -Weight: 328 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg

Used spiral rather with 5 extendable tank cars SAN CASSIANO, type: 2003 -In good condition- - for 250 kg (at 65% water content) - With 5 extendable tank cars - Control on the machine on the left - El. Connection: 400 V, 50 Hz, 30 A - Net weight: 1,355 kg - Condition: Good, regular maintenance - Ready for immediate use Visits and test runs are possible by arrangement.

Key data: 250 KW, 400 V

SES Gas CHP HPC 250 N Natural gas electricity and heat generator from 2015, unknown operating hours, closed module with pump station. 1 available 239 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2VL12 C 6/4, 315 KVA Manufacturer: SES Model: HPC 250 N Type: Natural Gas CHP Serial Number: P15024 Power [KWel]: 239 Power [KWth]: 365 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2015 Operating hours: unknown Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.50 x 1.85 x 2.45 AC Generator Leroy Somer LSA 46.2VL12 C 6/4 Manufacturer: Leroy Somer Model: LSA 46.2VL12 C 6/4 Type: AC Synchronous Generator Serial Number: 323575/1 Power [KVA]: 315 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 455 Speed [1/min]: 1,500 Year of Make: 2015 Weight [kg]: 885

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED A3 SPEED 250ML BASE LEAF FILLING LINE FOR SALE YEAR 2010 Item #: Usm-249 Category Tetra Pak A3 Speed A3 Speed 250ml Base Leaf with DIMC Cap in Mold, VCK Change from 125ml to 250ml Base Leaf in 2020, DIMC installed in 2020, Version 300v, Working Hours 33485, Speed 24000 Packs per Hour, Tetra Tray Shrink 51, Year of manufacturing 2010 Conveyors Filling Machine, PC-23 with chain 29 meter, Drive unit 4 pcs, Bend 90 X 4 pcs Conveyors TTS-51, UC-24 with chain 6 meter Condition: Tetra Pak Maintained.

WAIDA CNC OPTICAL PROFILE GRINDER Manufacturer: WAIDA, Japan Model: PGX-2500N Year: 2002 Type: CNC Optical Profile Grinder Country of Manufacture: Japan Quantity: 1 unit Machine Description High-precision CNC optical profile grinder suitable for manufacturing and regrinding precision punches, dies, cutting tools, molds, and complex profiles. Suitable for applications in the electronics, automotive, aerospace, and precision mold industries. Main Specifications Spindle maximum speed: 20,000 rpm Power supply: 200 V / 3-phase / 50 Hz Machine execution: Metric Control: CNC Language: English Grinding wheel: 75 mm wheel flange Included Standard Accessories Wheel opener Tool box Magnifier Magnetic chuck Dry dust collector Spindle chiller Lubricator Special Accessories / Options Dry dust collector Magnifier ×4 Projector lamp voltage ad ...

Vacuum Tumbler SUHNER AG 250 liters; Manufactured in Switzerland; External dimensions: 1200 mm×750×2000 mm; Set with vacuum pump, digitally programmable electronic display; The machine is available after having being completely factory refurbished; The price includes 1 year warranty, delivery, installation, samples and training;

Working volume – 250 liters Set – with electrical panel and fittings. Capacity – (720g) 190 pcs. Telugu Electric power – 28 kW Diameter – D 700 mm Height – H 1600 mm.

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Butcher boats Height 1900 mm Width 1100 mm Length 1400 mm Capacity 300 l Electrical Supply: 400V 50Hz 3N Total power 18.4 kW Main Material Stainless Steel, Acid Resistant

General SKU440X1395 MakeAlpine TypeA 250 CW No.84491.1 Year of construction1993 Main Features Motor35 KW Inlet diameter130 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizeø 250 x 20 mm Grinding room sizeø 1200 x 170 mm Number of pins on house side:140 Number of pins on door side:68 Pin diameter7 mm With hoppercheck InletDia 130 mm and Dia. 125 mm (2x) Feeding with rotating valve(cryogenic screw) Motor22 kW (400V, 2945 rpm): 11 kW (380V, 2910 rpm) Speed2945 and 2910 rpm Pin Mills MaterialStainless steel 1.4305 (303), Stainless steel 1.4552 General LocationBarneveld Floor space2x1,2 m Total height2 m Weight1250 kg Extra Specificationswith:- cryogenic jacket screw: Messen griesheim, type:120sb/sp2000. year:1993 Total lengt: 3500 mm. width:350 , height: 500 mm. Motor with variator: 1,1kW (400V, 1455rpm). Screw speed: 35-215 r ...

Vertical Two-Spindle Turning Center - Control Siemens 840 D - Machine bed VSC 400 Duo - 2 x disc turret 12 x dia 40 mm, driven - 2 x additional drilling and countersinking station - Open workpiece transport system - Transfer and turning unit - Interface to an external handling system - Central cooling center supply high-pressure pump 70 bar - Blowing off the pick-up device and the clamping devices - Workpiece measurement - Tool monitoring - Emag network option - Sister tool management Circumferential diameter 260 mm x-travel 860 mm z-travel 200 mm Main spindle 2 max. speed up to 4500 1/min Spindle spacing 1055 mm Main Drive 2 AC Asynchronous Motor 6ß/100% ED 39/28 KW Maximum torque 460 Nm Rapid traverse x/ z 45/ 30 m/min

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...