hydraulic press 250 used for sale

- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!

Description Becker DVTLF 250 from 2008 dry running rotary vane vacuum pump Manufacturer: Becker Type: DVTLF 250 Motor: 400V/50Hz Suction power: 250m³/h Final pressure: 200mbar (abs.) corresponds to 90% vacuum

Key data: 2500 mm, 1 mm

with segmented tools on the upper beam, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge (max.) Colour: green Total power requirement: 400 V Machine weight: 2200 kg Dimensions: 3500 x 1800 x 1600 mm Machine Number: 1808

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Wook IL Automatic Flatbed Punch WTNS-SSF 2500, Max. size: 2500 x 1500 mm, Maximum speed 1600 arcs/hour, Max. punching force 600t, 400V, 50Hz, Year of manufacture 2008, Prefeeder, fully automatic, RF technology, MFS 2500 HBL, Model 2516, Max. sheet format 2500 x 1650mm, Min. sheet format 600 x 450mm, Maximum speed 13200 arcs/h, Max. stack height 2400mm (min. 500mm), Maximum stacking weight 2000kg, 400V, 50Hz, Year of manufacture 2011

Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

An industrial vacuum dust collector Höcker is available. Suction diameter: 250mm, nominal volume flow: 4241m³/h, min. volume flow: 3534m³/h, motor power: 5.5kW, vacuum pressure: 2940Pa, weight: approx. 630kg. Documentation available. An on-site inspection is possible.

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

The Tetra Pak TB 19 is a filling machine for carton packaging in the refrigerated products sector. It was developed for the hygienic, but non-aseptic filling of pasteurized foods such as fresh milk, cocoa or other liquid dairy products. It enables reliable and efficient packaging in Tetra Pak cartons and is particularly suitable for products with a limited shelf life.

This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details.

A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TTB 19 250 ml base filling machine with a Tetra Pak CBP32 V400 Cardboard Packer and a Tetra Pak Straw Applicator SA 30. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.

Kneading dish made of stainless steel without carriage for double conical kneader DK 250, Fabr. W&P

This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

General SKU029F122 LocationBarneveld MakeEMDE Industrie- Technik Nassau TypeKH-300 + MDRD-120 + C-250 No.A 106.0212 Main Features MaterialStainless steel Specified Features - Powder filler Lifting + tilting machine/Container emptying station/vibro feeder (1x) Powder fillers Powder filler/Container emptying station/vibro feeder (1x) Dosingscale 15 KG Capacity250 Ltr. Dosing with vibro feederscheck With motor0,55 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) General Year of construction2006 Mounted in frameWith 2 containers (dia. 800mm), type C-250 Mounted on wheelscheck With switchgear, With vibro feeder type MDRD-120 Floorspace2,1x2,0 m Total height2,1 m Weight920 kg Extra SpecificationsContainers in stainless steel 1.4301 (304)Powdered foodsGeneric medicinesTea, herbs & coffeeStarchSpicesCatalysts & fillersDiscountPowder fillersFood additivesSugarSolid  ...

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

Size: 265 mm Impression: 2 Mio. Equipments: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

General SKU104U1454 MakeZiemann Ludwigsburg Type2500 l Year of construction1986 Mounted on legscheck Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 l Vessel sizesdia. 1400x1250 mm Dished bottomcheck Dished top sidecheck Top connections4x dia. 25 mm Outletdia. 35 mm Half coil jacketed(26 l.) Max. temperature140°C. With propellor stirrermake Ekato Motor0,75 KW, 380 Volt (Ex) With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4541 (321) General LocationBarneveld Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX designedcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubber ...

sheet width: 2520 mm plate thickness: 3.2 mm ST cutting thickness max.: 5.0 mm AL cutting thickness max.: 1.5 mm VA no. of strokes: 34 Hub/min cutting angle: 1° 20 Grad back stop - adjustable: max. 1.000 mm work height max.: 800 mm total power requirement: 7.5 kW weight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type E10-S - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - origina ...

CNC Machining Center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of Make: 2005 Internal machine no. 59 Travels: X-axis 2,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 3,220 x 1,000 mm Table load: approx. 3,000 kg Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 20 - 5,000 rpm Accessories - Coolant filter system 900 l - Internal cooling - Chip conveyors - Electronic handwheel - Partition wall for pendulum machining - Magnetic plate 2x 1,000 x 800 mm - Table switch TS27R - Prepared for touch probes

General SKU327X683 MakeDe Dietrich TypeAE 250 No.69198 Year of construction2008 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 700 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN55 with valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) General LocationBarneveld Floorspace0,95x0,95 m Total height3,00 m Weight820 kg CEcheck Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C.Conformity per Directive 97/23/EC (PED), Modul ...

General SKU327X681 MakeDe Dietrich TypeAE 250 No.69193 Year of construction2008 Mounted on legscheck Pressure Working pressure7 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 700 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN100 with pneumatic valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) General LocationBarneveld Floorspace0,95 x 0,95 m Total height3,00 m Weight900 kg CEcheck Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C.Conformity per Directive 97/23/EC ...

Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -geAir filtration by means of filter bags, cleaning motorized, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 250 mm, nominal volume flow: 4,241 m³/h, minimum volume flow: 3,534 m³/h, number of bags: 3 pieces, motor: 4 kW, dimensions (LxWxH): 2,500x1,280x2,500 mm, weight: 630 kg

General SKU432X1357 LocationBarneveld MakeGlatt AG Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying oven(Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trays24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck With jacketcheck Drying ovens Tray sizes500 x 800 x 30 Specified Features - Drying oven MaterialStainless steel 1.4301 (304) General TypeGHT-U-250 Machine number101.145 Year of construction1993 With switchgear(as is) Floorspace1,1 x 1,8 m Total  ...

This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of +50 / -50 mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details.

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

x-travel: 1550 mm y-travel: 400 mm z-travel: 500 mm table-size: 1850 x 350 mm spindle taper ISO: Sk 50 spindle turning speed range: 40 - 1800 U/min quill stroke: mm total power requirement: 7,5 KW weight of the machine ca.: 2,8 t dimensions: 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available -Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit

CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

General SKU327X682 MakeDe Dietrich TypeAE 250 No.69197 Year of construction2008 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume327 Ltr. Motor1.5 KW Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity250 l. (327 l.) Vessel sizesø 750 x 900 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN25 with valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor1,5 kW (400 V, 1390 rpm, (Ex)) Speed mixing shaft168 rpm MaterialGlass - Enamel (3009U) General LocationBarneveld Floorspace1,00 x 1,00 m Total height3,00 m Weight820 kg CEcheck Extra SpecificationsThe vessel is designed per Directive 94/9/EC (ATEX), Category II 2 G, Zone 1, Gas Group IIB, T-class T4 (max. 135 °C), max. medium temp. 90 °C.Conformity per Directive 97/23/EC (PED), Mod ...

Inv. Num. : 9184 Type: HA 250 W Producer: AMADA Created: 2024 Parameters: Saw blade dimensions: 3505 x 34 x 1.1 mm Weight: 1500 kg

Used stainless steel mixer made by Kates, capacity: 250 L, new: 1999. Test pressure 0.45 MPa, working pressure 0.35 MPa, max. temperature 135°C.

Specifications Serial no: 503592/01—CAB14191 Year of manufacture 06-2005 Range: 6 meters Further description to follow as soon as possible. 07.2.230

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...