hydraulic press 250 used for sale

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

• For packing blisters in folding box cartons Output max. 500 cartons/min, the max. speed depends on the format/product Folding carton format range max. W 80, H 90, L 155 mm For double-sided offset or same-sided tuck-in flaps Blister stacking device Max. 10 blisters per stack / max. height 85 mm Blister refill chute, manual 3 suction arms for folding box pick-up and counter-suction for pre-breaking MB-Bäuerle CAS 21/4 net leaflet folding and inserting machine from the magazine Color embossing printing unit on both sides Faulthy package ejection with counter-check HMI B+R Automation, IPC Beckhoff Servo controller Elau MC-4 with control unit Elau C600 Drive 400V/50Hz, rated current 6A / back-up fuse 25A Various accessories such as format parts / spare parts Infeed blisters via Flexlink conveyor

The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -

CNC milling machine Type: UBF 2500/10 Manufacturer: Kekeisen Year: 1997 Control: Heidenhain TNC 426 X: 2500 mm Y: 1200 mm Z: 1000 mm Spindle speed: 2000 rpm Spindle taper: SK 50 Table: 1200 x 1000 mm Max workpiece weight: 7000 kg Machine dimensions: length: 8300 mm width: 4000 mm height: 3250 mm weight: 17000 kg Two boxes with tools In good condition, under power. Find more here - / Contact us at -

Viessmann refrigerated cabinet model TectoDeck SV3 – your perfect solution for the attractive and efficient presentation of refrigerated goods. With an impressive length of 5 metres, this used refrigerated cabinet is ideal for supermarkets, grocery stores and other retail environments that require reliable and large-scale refrigeration. The TectoDeck SV3 fresh food safe model offers two rows of shelves and a lower shelf, so you can present your goods in the best possible way. The ergonomically optimized design ensures the best view of goods and easy loading and removal of goods. More assortment depth and a larger display area are guaranteed by this refrigerated cabinet. It also uses an environmentally friendly refrigerant, which is both environmentally friendly and easy to clean and service. Thanks to flexible installation options in the store and only one power connection (230V), t ...

Fristam FP 752/250 VB - High-pressure centrifugal pump - 45m3 at 12 bar - 30 kW - Double schaft seal - Serial numbers: 0482550073 + 0482550074 - Excellent condition 2 pumps available

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Manufacturer: TEDOM Model: FLEXI 250 Year of Manufacture: 2022 Type of Machine: Combined heat and power plant (CHP) Primary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 3.5 bar - Max. Permissible Temperature: 95°C - Category: II - Nominal Size: 100 - Fluid: Water-Ethylene Glycol - Volume: 350 L Secondary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 10 bar - Max. Permissible Temperature: 90°C - Category: Article 4, Section 3 - Nominal Size: 80 - Fluid: Water-Propylene Glycol - Volume: 56 L Reversible heat pump Manufacturer: Mitsubishi Model: NX2-N-G06 /A /0606 Type: Reversible, air-cooled heat pump Function: Heating and cooling Power Supply: 400V / 3-phase / 50Hz Find more here - / Contact us at -

Manufacturer: Polytechnik Model: FR 250 II Year of Manufacture: 1993 Type of Machine: Boiler System Nominal Power, Wood Chips; 215.000 kcal/h Equivalent Power: 250 kW Capacity : 900 l Max Operating Pressure .: 6 bar Test Pressure : 9 bar Max Flow Temperature : 90 °C Find more here - / Contact us at -

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Direction of rotation - housing position LG 0 Operating temperature 20° C Density 1.2 kg/m³ Flow rate 3,600 m³/h Total pressure increase 3947 Pa Speed 2,950 min-1 max. operating temperature 40° C Motor rated power 7.5 kW Voltage 400 V Frequency 50 Hz Weight approx. 218 kg

Used double spiral mixer VMI, type: Petrin Kneadster KN 250 -in bakery condition- - 2 kneading machines incl. 4 extendable tank wagons for 250 kg dough - Machine with double kneading arms - Fast and even dough preparation without heating - All in stainless steel - Incl. boiler lifter for tipping onto a work table -El. Connection: 400 V, 50 Hz, 80 A, 55.3 kW - Protection class: IP 54 The dough mixers are in good condition and ready for immediate use. More pictures on request. Viewing and test run are possible.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

plate thickness: 4 mm blade length: 250 mm angle adjustable from - to: fest 90 Grad table surface area: 900 x 800 mm total power requirement: kW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Manufacturer: Nolting, Type: SUR 2500, Year: 1999, Heating power in kW: 2500, Fuel type: Späne, Heating medium water: yes, Year :1999

Used autoclave ASCA, type: 250 E -renewed- - Boiler capacity: 250 litres - Electrically heated - Boiler, core temperature and F-value adjustable - New temperature sensor - New drain hose - Electrics completely checked - Digital control - Auto-signaling - Device on wheels, mobile - Condition: Very good, ready to use The device is in pristine condition and is ready to use right out of the box. Visits and test runs are possible by arrangement.

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

Manufacturer: FIDI Destlliergerät, Type: RS 250 AX, Year: 2016, FREETEXT1: Füllkapazität 20-30 Liter, FREETEXT2: Kesselvolumen 40 Liter, FREETEXT3: Lösungsmittel 4-5 Stunden, FREETEXT4: Spülwasser ca.12 Stunden, FREETEXT5: Abkühldauer 3-7 Stunden, FREETEXT6: Betriebtemperatur 50-200 Grad, FREETEXT7: Kw Leistung ca 2,1, Year :2016

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working length mm: 2500, Working widht mm: 1400, Total hight mm: 900, Engine power kW: 0,75, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working widht mm: 1400, Working widht mm: 1400, Year :1999

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -

with remoweble bowl

grinding diameter: 420 mm grinding length: 2500 mm swing diameter: 870 mm centre distance: 2700 mm workpiece turning speeds: 1-164 U/min total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

DC shunt motor 138 kW with tachogenerator and external fan Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP23

DC shunt motor 138 kW Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP 23

Key data: 200 KW, 250 kVA, 400 V

The Electroquell 250 kVA (200 kW) generator is suitable as a main or backup power source in factories, hospitals and public facilities. The Ricardo engine ensures high performance. Ricardo Euro V-engine ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing made of Al.-Zn. sheet metal Drip pan Engine heating Power: 250 kVA / 200 kW Voltage: 400 V Current: approx. 361 A Large capacity fuel tank Additional options: ATS, remote control, enlarged tank Warranty: up to 60 months

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

swing diameter: 640 mm max. turning passage: 640 mm control: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - - bar material dia.: 65 mm chuck diameter: 200 - 315 mm spindle bore diameter: 80 mm diam. of main spindle in forward position: 120 mm --- Subspindle ---: - - - - - - bar material dia.: 65 mm chuck diameter: 315 mm spindle bore diameter: 80 mm forward bearing diameter: 120 mm - - - - - General data - - - - -: - - - - - - spindle distance: 1.500 mm turning length: 1.185 mm Main-/Counter -spindle turning speeds: 5.000 U/min driven tools turning speeds: 12.000 U/min Slide cross: X1, Y1: 550 / 180 mm Slide cross: Z1: 1.185 mm Slide cross: B1: 240 ° Slide cross: X2: 180 mm Slide cross: Z2: 1.050 mm Slide cross: Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret fo ...

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.