132,788 used machines on RESALE, but how to find them? Machine Search
max 3500 PSI, 7 hp petrol engine, unused Auction-ID: A1-40418-94
Still in operation, a maximum of 10 operating hours can be added Here is the compact overview of the most important technical data for the mütek MPP 80: FeatureSpecificationThroughputup to 80 kg/h (depending on material) Briquette diameter80 mm (standard) Engine power5.5 kW (hydraulic drive) Silo volumeapprox. 1.0 m³ (standard with agitator) Material moisturemax. 18 % Atro Material size< 20 mm (granules/chips) Dimensions (LxWxH)approx. 1,850 x 1,450 x 1,450 mm Weightapprox. 850 kg Power connection 400 V / 50 Hz / 3 phases Special feature: The machine has an oil shortage switch as standard to protect the hydraulic pump when the oil level is too low. Auction-ID: A1-46501-519
Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10
Slide size 1520x1070 mm Slide stroke 254 mm Strokes per minute 30 Opening between the uprights 1570x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2016 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-8
Complete overhauled Amandus Kahl pellet press. The C35-780 pellet press itself has recently been overhauled; Full documentation of all new parts is available, one of which can be seen in the photos. The last 2 pictures of the Amandus Kahl pellet press in the factory were taken before overhauling and disassembling for sale. Specifications: Brand and type: Amandus Kahl C35-780 pellet press Amandus Kahl C35-780 pellet press with 110 kW electric motor Specifications: Brand/type: Amandus Kahl C35-780 Version: pellet press with base plate Motor power: 110 kW Year engine: 2024 Engine condition: virtually unused Press components overhaul year: 2024 Sawdust capacity: 2.5 – 3 tons/hour Biomass capacity: 3 tons/hour Bran capacity: 3.5 – 4 tons/hour Straw capacity: 2 – 2.5 tons/hour Features: New 110 kW electric motor Electric control cabinet with emergency stop Full elec ...
Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5
Slide size 1520x1070 mm Slide stroke 254 mm Shots per minute 36 Opening between the uprights 1520x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-11
Technical details Type: Industrial fastening components (clamping bolts / tie rods) Configuration: Heavy-duty threaded rods with hex heads Quantity: Approx. 18–25 pieces Thread size: Estimated M24 – M42 (metric coarse) Length range: Approx. 300–700 mm Material: High-strength steel (industrial grade, approx. 8.8–10.9 equivalent) Design features: - Long cylindrical load-bearing shanks - Hex heads for high-torque tightening - Some stepped/shouldered sections for alignment Application: Tool clamping, die fixing, press fastening, and heavy fixture mounting Dimensions and weight (approx.) Length: 500 mm (average) Width: 60 mm Height: 60 mm Weight: 250–400 kg (total) Auction-ID: A7-46498-130
General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical component ...
PRESSURE UNIT KARCHER Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1015
Technical details Type: Industrial tooling components (fixture blocks / die holders) Configuration: Cast metal blocks with flange geometry Quantity: 5 units Design: - Oval/rectangular flange shapes - Central bores (single and double configurations) - Multiple bolt holes for mounting Material: Cast iron or cast steel Construction: Thick-walled, designed for high mechanical and thermal loads Application: Fixture bases, die holders, mould supports, or furnace/press tooling Load capability: Suitable for high-temperature and high-stress environments Dimensions and weight (approx.) Length: 300 mm Width: 200 mm Height: 120 mm Weight: 120 kg (total) Auction-ID: A7-46498-129
Professional pressotherapy system designed for lymphatic drainage and body treatments. Includes full body compression suit with multiple air chambers for legs, abdomen and arms. Equipped with adjustable pressure programs and control panel for customized treatments. Suitable for improving circulation, reducing fluid retention and aesthetic body treatments. Auction-ID: A1-46551-4
Overview This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system
Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Gluing height 1500mm Foot width 100mm Number of vertical clamps 6 Number of frontal clamps 3
Screw Press Dewatering Press Sludge Press Screw Separator Used Manufacturer: IMC with 2 counter-rotating parallel screws Screw diameter approx. 150 mm Screws and sieves made of brass, residual steel Insertion funnel approx. 400 x 500 mm Drive via V-belt and gearbox approx. 60 rpm Engine: 2.2 kW 940 rpm 220/380 V Total dimensions: approx. 2300 x 700 x 1750 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Slide Dimensions X-Y (mm) 450 x 300 Stroke (mm) 400 Strokes type fixed Stroke per minute 150 Features no extractor cylinder Screw diameter 200 mm
Excellent condition - Fully operational - Loading / Transport possible! - nominal force: 500 kN - Max. eccentric load: 80 kN - Max. bending length: 2000 mm - table length: 2000 mm - table width: 60 mm - table height: 965 mm - Passage between pressing beams: 370 mm - stroke: 100 mm - Jib length: 400 mm - distance between columns: 1690 mm - Max. pressure: 31.6 Mpa - number of cylinders: 1 - oil capacity: 45 L - Motor power: 6 kW - Max. Delivery Speed: 79 mm/sec - Max. working speed: 10 mm/sec - Max. Return Stroke Speed: 80 mm/sec
CNC-controller CYBELEC ModEva 10S, working lengh - 4550mm, pressing force - 200 ton Auction-ID: A7-46486-2
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-730
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-729
Upgrading of the electrical system carried out in the 90s by BRUDERER. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Dimensions of the Painting: 600 x 700 x 2400 approx. mm Capacity: 25 Ton Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-731
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-727
2 heated plates, table size 1300 x 2500 mm Auction-ID: A7-46472-11
Electrical panel that manages the general control of the filter; Filter plates: 610x610 mm; Hydraulic control unit for closing and opening the filter, applied to the frame. Serial: 6008 Estimated weight: 360 kg Approximate dimensions: 3500x1500x1700 mm Auction-ID: A7-46655-180
Redevelopment of the electrical system carried out in 2017. Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-723
CYBELEC V-DNC-1200/B DNC 1200 Ps/B, working lengh - 4100mm, pressing force - 150 ton, max. stroke - 415mm, max. closing speed - 200mm/s, pressing speed - 1-10mm/s, Auction-ID: A7-46486-4
Maximum distance spindle-work table: 345 mm, number of speeds: 12 - no-load rpm: 200-3070 spindle connection: B16 CM2 - spindle stroke: 62 mm. Estimated weight: 70 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-46655-162
CNC controller CYBELEC MODEVA 10S working lengh - 3550mm, pressing force - 150 ton, Auction-ID: A7-46486-3
Hydr broaching press including keyway pressure milling Auction-ID: A1-45502-228
equipped with beading rod, manually operated Auction-ID: A1-45502-10
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-726
Manual press, column passage: 651mm; plate 500 x 500mm. Serial: 515988 Estimated weight: 300 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-46655-183
Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-728
Key data: 5 t, 600 mm
Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels
Dimension of press: 1400x1400x1600mm, Workshop screw press, incl. assortment of tools; for more details see photos of Regal Auction-ID: A7-46619-324
Manual press brake Bending length 300mm Material thickness max. 2mm Knife widths 25, 50, 75 and 150mm Bending angle max. 90 degrees Condition: never used / new (5) Auction-ID: A7-46642-110
Pneumatic Press Pressure max. 7.5t Table 250 x 200mm Projection 100mm incl. tools and foot pedal see pictures Auction-ID: A7-46642-219
Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5) Auction-ID: A7-46642-187
Jaw width approx. 125mm, Clamping forces: 0=direct, 1=10kN, 2=20kN, 3= 30kN, 4= 40kN Auction-ID: A7-46619-283
Toggle hand presses HK 1700 stroke 60 mm with crank with working height fine adjustment Height of the stand 450 mm Without additional effort, even more pressure in production. Maximum pressure output shortly before the end of the stroke thanks to toggle technology. Particularly stable design of spindle head and stand Pressure 17.0 kN Stroke 60 mm Projection 105 mm Working height from up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x415 mm Condition: never used / new (5) Auction-ID: A7-46642-154
Rebuilt in 1992 by Beck & Röhm, Printing capacity: 630t, Clamping surface: 1730x2500 mm, Number of grooves. 8, Plunger stroke: 900 mm , Installation height: 1550 mm, Power requirement: 2 x 7.5 kW, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-210
Pneumatic Press Pressure max. 7.5t Table 250 x 200mm Projection 100mm incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-46642-183
4x 65T4H (used) 17x 65MB64H (orig. packaging) Auction-ID: A1-46686-47
range of robust presses/tool pads; see photos for more details Auction-ID: A7-46619-211
Pneumatic Press incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-46642-120
Base length 570 mm/ including pallet box Auction-ID: A1-46698-93
Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details Auction-ID: A7-46619-322
assortment of various presses/tool pads in different lengths and sizes (also contents from the shelf); see photos for more details Auction-ID: A7-46619-212
maximum number of results exceeded
please refine your search
160 € 
