134,049 used machines on RESALE, but how to find them? Machine Search
Key data: 90 , 40 , 510
Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...
Key data: 300 t, 3000 mm
Inv. Num. : 8595 Type: CNC HAP 30300 Producer: DURMA Generated: 2000 Parameters: Control system: DNC 880S Compressive force: 300 t Maximum bending length: 3000 mm Lifting height: 245 mm Weight of the upper tool: 55 kg Reduce tool weight: 310 kg Number of strokes: 3 1/min Machine height: 3100 mm Machine length: 4550 mm Machine width: 2400 mm Machine weight: 16000 kg
Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg
Yoshikawa US-66 riveting machine 5mm high spin type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNm PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mm SLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passa ...
Manufacturer: KBA Model: 46DI Year of Manufacture: 2004 Type of Machine : 4-color offset printing press Includes transport pallet and server 5.8 million impressions total Production speed: 7,000 sheets per hour Comes with inks and maintenance materials (including 4x4 CMYK) Installation area: approx. 350 x 300 cm Complete maintenance performed in July 2022, including full disassembly, cleaning, and reassembly Find more here - / Contact us at -
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual
RONCHI TABLET PRESS, MODEL PA20 Year of manufacturing: 2003 High-speed tablet press for the dosage, pre-compression and compression of solids for the production of tablets. For use with Euro D tools. Documentation available. CHARACTERISTICS • Tool size: Euro D PRODUCTION • Production capacity: 56,000 tablets/h • Punches sizes available: Ø20 mm (complete) + Ø8 / Ø11 / Ø13 / Ø16 (4 punches + covers for small production runs) Number of punches: 20 units • Max. tablet diameter: 25 mm • Max. compression force: 10,000 Kg DIMENSIONS • Size: 83 x 130 x 175 cm
Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg
Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900
Used machine, Woma / Kärcher Ecotherm, hot water Working pressure: 500 bar flow 27 lpm, Year of construction 2009 Drive: Diesel 36.5 kW, Kubota V 2403 Diesel Operating hours: approx.: 645 h,
Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.
Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg
Hot stamping hand lever press, embossing foils, silver gloss and gold luster among others are included Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours
Height=0.92 m, Overall length= 0.6 m, Overall width= 1.22 m, Net weight= 170 kg,
Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW
Manufacturer: Rabolini Model: Imperia Type of Machine : Die–cutting press Find more here - / Contact us at -
Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton
Capacity: 4517l, operating pressure at 20°C: 3atü. An on-site inspection is possible. Can be used for liquids.
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
pressure: 20 t throat: 200 mm stroke: 0 - 50 mm table:: 360 x 550 mm table:: 140 mm - Bohrung no. of strokes: 160 Hub/min bore: 35,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 240 mm total power requirement: 2,2 kW weight: 1.250 kg range L-W-H: 1310 x 1250 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 200 mm stroke: 0 - 60 mm table:: 400 x 600 mm table:: 150 mm - Bohrung no. of strokes: 140 Hub/min bore: 40,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 300 mm total power requirement: 3,0 kW weight: 1.670 kg range L-W-H: 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 160 mm stroke: 0 - 40 mm table:: 270 x 370 mm table:: 100 mm - Bohrung no. of strokes: 200 Hub/min bore: 25,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 180 mm total power requirement: 0,75 kW weight: 590 kg range L-W-H: 1.168 x 1.010 x 1.670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 kg throat: 95.0 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17.0 kg dimensions of the machine ca.: 270 x 130 x 330 mm Description: - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 5,0 t throat: 215 mm workpiece height max.: 445 mm Mandrel diameter: 50 x 50 x 645 mm table plate: Ø 275 mm total power requirement: manuell kW weight of the machine ca.: 160 kg. dimensions of the machine ca.: 370 x 550 x 810 mm Description : - for pressing in and out of bearings, bushings, ... - the basic body of the model DP 5 made of high-quality gray cast iron - Includes mounting holes, ideal for mounting on a workbench - suitable for bushing, straightening, bending, broaching, ... - variably adjustable lever bar, depending on the required effort - ideal for repair shops and the general workshop area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8643 Type: LEK 250 Producer: ZTS Generated: GO Parameters: Compressive force: 250 t
Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dusts incl. autom. Level detector - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Control cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic power unit: approx. 300 l tank for hydraulic oil - Weight: approx. 1,100 kg 2 = 2,200 kg Used briquetting press in good condition W-pliers cylinder, pliers (RB 120 reinforced), pliers connection flange renewed on one side (left in the direction of conveyance) briquetting | Briquette Press | Briquetting Presses | Briquette Press | Briquetting # Briquetting press type GP 120 Tandem Briquetting ...
Machine name: Chamber filter press used Manufacturer: Simex Sauer Type: SPK 80 Year of Make: 2000 Design: Side-spar press Filter pressure: 16 bar Press capacity: approx. 1,000 litres Procedure: Closed Filter area: Approx. 80 m2 Plate format: 800 x 800 mm Number of plates: 78 Panel material: Polypropylene Plate Feed: Manual Filter Cloths: No Filter Cloth Washer: No Panel package length: 4,400 mm Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 6,400 x W 1,400 x H 1,500 mm Curb weight: 6,000 kg Technical documentation: No Accessories: A control cabinet & a hydraulic system Condition: Used Price: On request
Manufacturer: Leimbach Model: HP 2 Year of Manufacture: 1995 - Major revision and reconstruction 2006 by Recuperma - The press can also run semi-automatically. - No longer in Operation Specifications: - Package size: 400 x 400 mm - Press box: 1,900 x 1,000 x 400 mm - Filling opening: 1,240 x 940 mm - Power pre-compressor: 1,500 KN - Power final compressor: 2,250 KN - Drive: 1 x 75 kW - Production: approx. 100 packages/hour - Weight of system: approx. 27 tons Find more here - / Contact us at -
LOIR SAFE PHSL CNC PRESS BRAKES Year of construction 1999/2023 (cnc renovation) Control : Step Automation RK15 Max. bending force: 630 t Usable bending length: 6050 mm Projection: 500 mm Engine power: 47 kW Total weight : 58t approx.
Type: ASP600HDI Serial number: 21401214 Year of construction: 2003 Belt width: 600 mm Belt speed: 1.2 - 12 m/min Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 2400 x 900 x 1600 mm Weight: 590 kg
Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.
An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.
Key data: 80 t, 2550 mm, 2050 mm
Safan CNCS 80-2550 - Hydraulic press brake - Incl. various bending tools - Year of construction 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Projection: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stop time: 140 ms - Stop travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 80 to PRESS TABLE table surface (left-right): 850 mm table surface (front-back): 550 mm SLIDE table surface (left-right): 560 mm table surface (front-back): 376 mm spigot hole diameter: 50 mm stroke: 110 mm stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 0 mm stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 855 mm space requirements -front/back-: 1635 mm total height: 2640 mm total weight approx.: 5400 kg ATTACHMENTS (PRESSES) 2-hand engagement: yes foot engagement: optional European CE standards: yes
gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.
Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg
Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.
Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -
Key data: 100 t
Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee
used
Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
