hydraulic nc press used for sale

Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.

M. No.: 2067 Working width max. (mm): 800

Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Stainless steel platform movable for bread roll presses / dough dividing machines suitable for all common bread roll presses Solid construction loadable with 1 t Easy locking Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH NEW More TOP bakery machines and equipment in stock!

SPECIFICATIONS: Pneumatic Upholstered Furniture Press

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (will be done after  ...

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Tool trolley for bending tool, die, upper knife, upper tool, straight tool -Tool trolley for the: Tool for a press brake -with several compartments -Dimensions: 1165/720/H1000 mm -Weight: 208 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Recording with: Slotted hole -Length (unit of measurement): approx. 300 mm - Fine-tuning -Quantity: 2 available Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg

Bending tool, die, upper knife, upper tool, straight tool -Transfer in current condition as seen -Tool for: press brake -Tool: 45° -Thickness: 25 mm -Total length: 600 mm -Total height: 195 mm -Weight: 20 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm -Weight: 26 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/40 mm -Drawing with the pictures -Total length: 599 mm -Total height: 68 mm -Weight: 28 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 60° -Thickness: 25 mm -Total length: 1570 mm -Lengths: 75/75/120/120/590 mm -Total height: 246 mm -Weight: 44 kg

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -Dimensions: 175 x 26 mm -Total length: 315 mm -Weight: 8 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool radius: 10 mm -Thickness: 20mm -Total length: 471 mm -Total height: 188 mm -Recording width: 80 mm -Weight: 19.8 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 88° -Dimensions: 188 x 55 mm -Total length: 351 mm -Lengths: 341/10 mm -Weight: 18.6 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 800 mm -Lengths: 45/50/55/60/90/500 mm -Weight: 28 kg

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 88° -Dimensions: 190 x 55 mm -Total length: 1126 mm -Lengths: 338/338/450 mm -Weight: 54 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 2125 mm -Lengths: 20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100/200/500/500 mm -Weight: 84 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 82° -Thickness: 25 mm -Edge length: 1039 mm -Total height: 162 mm -Weight: 26 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 145 x 43 mm -Total length: 2946 mm -Lengths: 25/30/35/40/50/70/100/200/200/300/400/500/996 mm -Weight: 92 kg

Pressure valve, pressure gauge, pressure indicator, manometer -Pressure gauge: for oil filter -Measuring range: 2.5 bar -Fitting: Ø 45 mm -Thread: mm -Number: 19x fittings available Price: per piece -Weight: 0.055 kg

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Pressure regulator intermediate plate -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm -Weight: 1 kg

TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic

3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections

200 ton x 4000mm Y1 Y2 X R Z1 Z2

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg

PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

MAX CAPASITY 80 T

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg