128,430 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm
SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins
TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...
Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 high-pressure gun with quick coupling and swivel joint in the input - Double jet tube with nozzle 065 and low pressure nozzle Optional (additional cost): - Hose reel - 30 m high pressure hose The images contain additional options. Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...
New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...
New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
1100T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 1,100 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guide: 4 column guides (Ø 150 mm) Clear width between the uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 1,000 mm Total height ...
Nilsfisk ALTO NEPTUNE 8, Price: 3.500 € netto, year of construction 2008. Hot water high-pressure cleaner for the most demanding cleaning tasks. The device combines powerful pressure with high water output, which is needed for cleaning heavy soils in agriculture, construction, transport or industry. In addition to the convincing cleaning effect, the high alluvial performance is particularly effective. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.
For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time
Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg
2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...
Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg
Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW
SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher
Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089
Cold water high-pressure cleaner Working pressure: infinitely variable up to 350 bar Required quantity:up to 21l/min (1.260l/h) Pump:3-Plunger All-Ceramic Engine:2 Cyilinder, Hatz Diesel,air-throated Motor power:17 kW Speed motor/pump: 2,900/1,450 rpm Pump drive: V-belt Fuel consumption:approx. 4,0l/h Volume fuel tank:20l Pressure outlet (water):M221.5AG Heating capacity Olbrenner Empty Weight:215kg Mass(LWH) 918096 Article no.: 1 492 060 or 1 492 002
used
Hot and cold water high-pressure cleaners Working pressure:infinitely variable up to 350 bar max requirement quantity:16l/min Pump:3 Plunger,All-ceramic Engine:Kubota 3-cylinder diesel Motor power:13kW Speed motor & pump: 3000/1,090 rpm Pump drive:V-belts Fuel consumption:3,9l/h Volume of carbon tank:70l Volume water tank:300l Pressure outlet (water) M22 1.5IG Heating capacity olburner: max1115kW (approx. 95°C) Consumption Olbrenner: approx. 7l/h Construction:self-supporting frame on frame with forklift pockets Empty weight:about 680kg Mass(LWH) 152122146 Dimensions open (LWH) 183122195 Article no.: 1 480 030
used
Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 220 bar max demand quantity 26l/min Pump:3-Plunger,All-Ceramic Engine: Kubota 3-cyilinder diesel Motor power: 13kW Speed motor and pump: 3,000/1,760 rpm Pump drive: V-belt Fuel consumption: 3,9l/h Volume fuel tank: 70l Pressure outlet: (water): M22 1.5 AG Heating capacity Olbrenner : max 1115kW (ca 95° C) Consumption Olbrenner: approx. 7l/h Construction: Skid - Construction Empty weight: about 420kg Dimensions(LWH) 12080112cm Article no.: 1 546 712
Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg
Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...
Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm ...
Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.
Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.
Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type ...
used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)
Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2500 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamp ...
Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2760 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-actio ...
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators -Pressure accumulator: without type designation -Container: Ø 122 mm -Dimensions: Ø 122 x 200 mm -Weight: 2.7 kg
Fogg &Young C Frame Press 3400mm wide Upstroking 3x heating zones Eurotherm controllers
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg
Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg
maximum number of results exceeded
please refine your search
