hydraulic nc press used for sale

pressure:20 t passage width:1500 mm stroke:500 mm total power requirement:3 kW weight of the machine ca.:6,5 t dimensions:ca. 2700 x 1700 x 2700 mm Max Working height:1500 mm return capacity:2 t Table dimensions:1500 x 2100 mm :1500 x 2100 mm table height over floor:900 mm pre-running speed:10 mm/sec pressure speed:10 mm/sec return speed:25 mm/sec speed rapid traverse:10 mm/sec :150 l :AW46 Monitor:(WEG) 7 Zoll

pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll

pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON

pressure:500 t passage width:1100 mm stroke:600 mm Controll:Zweihandbedienung cylinder:1 Stück motor:37 kw work height max.:900 mm Table dimensions:1000 x 1000 mm table height over floor:900 mm pestle plate:1000 x 1000 mm Main cylinder:Ø 500 mm Auxiliary cylinder:2x Ø 120x70 mm Daylight Opening:900 mm :150 Lt./min. Approach Speed:150 mm/sec Pressure Speed:15-3 mm/sec Return Speed:150 mm/sec Heating collectors:max 250 °C Light sensors sick:900 + 150 mm Monitor:12" SIEMENS Zoll Ruler measuring rod for setting the stroke length:NOVOTECHNIK

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 65 t chamfer lenght: 2500 mm distance between columns: 2050 mm table width: 140 mm table height: 750 mm total power requirement: 8 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3, x 1,2 x 2,6 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 630 mm : 10-25 mm/s : 300 mm/s : 750x625 mm : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...

Durma TP93 Hydraulic CNC Punch Press 30 Ton Machine isi n good condition Mate tools included

pressure: 25 t throat: 250 mm stroke: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 1000 x 1700 x 2600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm total power requirement: 4,0 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 1700 x 900 x 2500 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 400 mm column daylight: 920 mm Frame Width: 300 mm total power requirement: 3,0 kW tank capacity: 31 l : 5,4 mm/s : 8,3 mm/s weight of the machine ca.: 750 kg dimensions of the machine ca.: 1600x580x2550 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 400 mm Frame Width: 350 mm column daylight: 1.100 mm cylinder diameter: 120 mm work height max.: 900 mm total power requirement: 5,5 kW weight of the machine ca.: 1.400 kg dimensions of the machine ca.: 1800x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm Frame Width: 450 mm column daylight: 1.400 mm cylinder diameter: 170 mm work height max.: 900 mm total power requirement: 7,5 kW weight of the machine ca.: 2.300 kg dimensions of the machine ca.: 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Durma AD-R 30135 CNC Press Brake Machine will be available February 2023 Wila tools

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 650 t passage width: 920 mm stroke: 1750 mm Table area: 2000x1500 mm ram surface: 2000x1500 mm dayligth: 2100 mm light-barrier: hydraulic: 203 bar closing speed: 500 mm/sec pressing speed: 0,5-10,4 mm/sec hole in plunger diameter/depth: mm opening speed: 250 mm/250 ejector: return capacity: 150 t total power requirement: 75 kW weight of the machine ca.: 47 t dimensions of the machine ca.: 4,4x2,5x7,5 m max pressure 250 bar 800 t impact shock dampening dissolution rate from 0.5 to 66.4 mm / sec The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LVD tooling Capacity: 100 ton x 3100 mm Backgauge: CNC Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 10 HP Length: 3410 mm Depth: 1480 mm Height: 3050 mm Weight: 9 ton

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 80 mm/sec work speed: 7,5 mm/sec work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm back stop - adjustable: 800 mm voltage: 400 Volt total power requirement: 11,0 kW weight: 7.524 kg range L-W-H: 4250x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 165 mm/sec work speed: 14,0 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 5640 kg range L-W-H: 3012x1960x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 6,1 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt weight: 8.514 kg range L-W-H: 4910x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 12.906 kg range L-W-H: 5100 x 2250 x 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 185 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 930 mm table width: 200 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 11.020 kg Dimensions (HxWxD): 5050 x 2250 x 2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1.870 kg. dimensions of the machine ca.: 2.050 x 1.000 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7,5 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 3,0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,5 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 240 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 16.925 kg Dimensions (HxWxD): 4550 x 2450 x 3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 9.450 kg range L-W-H: 4.250x2.150x2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

pressure: 400 t chamfer lenght: 4270 mm distance between columns: 3780 mm column arm: 510 mm ram stroke speed: 110 mm/sec return speed: 130 mm/sec work speed: 8,0 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 1000 mm table width: 240 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 26.750 kg Dimensions (HxWxD): 5600 x 2650 x 3470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 380 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 5.227 kg range L-W-H: 3750x1950x2400 mm Furnishing: - DELEM - CNC control model DA-53T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1200 x 2550 mm weight of the machine ca.: 2070 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 155 mm/sec work speed: 9,5 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 6.850 kg range L-W-H: 3.750x1.950x2.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,5 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30,0 kW weight: 22.600 kg Dimensions (HxWxD): 5.350 x 2.450 x 3.150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm max. ram stroke: 170 mm feed down: 140 mm/sec feed up: 170 mm/sec pressing speed: 17 mm/sec main drive: 5,5 kW table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min total power requirement: 5,5 kW weight of the machine ca.: 3,22 To. dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning contro ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 160 mm/sec work speed: 11,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18,5 kW weight: 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 150 mm table surface area: 185 mm Breite column travel between the guideways: 530 mm weight of the machine ca.: 162 kg dimensions of the machine ca.: 800 x 700 x 1805 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 765 mm : 10-20 mm/s : 250 mm/s : 1000x750 mm : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 0160 t chamfer lenght: 5120 mm distance between columns: 4050 mm Control: konv. throat: 300 mm table width: 200 mm stroke max.: 200 mm dayligth: 400 mm feed down: 50 mm/sec feed up: 100 mm/sec feed under pressure: 5 mm/sec total power requirement: 11 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 5,4 x 1,75 x 3,3 m Machine will be supplied with many tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.