hydraulic nc press used for sale

with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame Auction-ID: A7-46287-174

Machine number: 3-0512 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 160 mm incl. installed punching tool Auction-ID: A7-46287-214

Wheel diameter: 800 mm Table dimensions: 370 x 230 mm Auction-ID: A7-46287-31

Max. stroke: 50 mm Max. capacity: 4 t on base Table dimensions: approx. 360 x 245 mm Reference: Groven - Lot 5 Auction-ID: A7-46763-309

Printing capacity: 8.5 kN Table dimensions: approx. 160 x 120 mm Ram diameter: approx. 25 mm Reference: Hansmann - Lot 32 Auction-ID: A7-46763-57

Machine number: 3140295 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 10 - 100 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-21

Production: 30 to 60 kg/h Briquettes: Diameter: Ø 55 mm Motorization: Pump motor power: 5.5 kW / 7.5 HP Power supply: 380 V / 50 Hz Hydraulic: Briquette cylinder Ø 120 mm Pushing power: approx. 700 kg/cm² Drawer cylinder Ø 40 mm Mechanical elements: Cylindrical ferrule Ø 1,000 mm Machine dimensions: 1,650 × 1,150 × 1,460 mm Weight: 830 kg Auction-ID: A1-46801-77

\"Kleaning Room 3000\" high-pressure cleaning system integrated into a closed cabin, suitable for cleaning industrial parts. Equipped with a stainless steel washing area, floor with drainage grid and protective curtains. The system includes a high-pressure pumping unit, water filtration system and chemical dosing (detergent output 8 L/min at 20 bar). Maximum rinsing flow rate of 12 L/min at 220 bar. Integrated control panel with emergency stop and electrical protections. Operating temperature range between 10°C and 40°C. Power supply by 10 kW motor, 380–420V AC, 50–60 Hz. Machine designed for fixed installation. Ideal for cleaning applications in industrial environments or workshops. Auction-ID: A7-46053-2

Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-215

Machine number: 473678 Delay time: 69 ms Safety distance for hand control tool: 110 mm Table dimensions: 700 x 525 mm Auction-ID: A7-46287-17

Machine number: 2-0095 Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Delay travel: 0.06 s Table dimensions: approx. 190 x 150 mm with pneumatic punching tool mounted Auction-ID: A7-46287-211

Machine number: 4801178 max. load: 450 kN Throat: 230 mm Lifts: 110 1/min Lifts adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 3 kW Table dimensions at the bottom: approx. 700 x 460 mm Table dimensions at the top: approx. 380 x 180 mm with a feed device Auction-ID: A7-46287-182

Machine number: 2-0537 Compressive force: 28 kN Stroke: 60 Table dimensions: 200 x 160 mm Plunger: 60 x 35 mm Auction-ID: A7-46287-223

consisting of various pressing devices and tools Auction-ID: A7-46287-60

Pressure capacity: 35,000 kg Plunger strokes: 110 1/min Throat: 220 mm Plunger adjustable: 50 mm Stroke adjustable: 0 - 70 mm Motor power: 3 hp Voltage: 220/380V Table dimensions: 550 x 460 mm Auction-ID: A7-46287-23

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves Auction-ID: A7-46287-132

AGA Pressure Reducers Lattice box/pallets not part of the auction. Auction-ID: A1-46806-7

MICHELIN MPX150HDV , 2,5KW , MAX 150BAR There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46023-25

IN WORKING CONDITION. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46023-24

Machine number: 3-0419 Compressive force: 3 kN Stroke: 50 Table dimensions: approx. 150 x 110 mm Auction-ID: A7-46287-222

Machine number: 2-0513 Compressive force: 28 kN Stroke: 60 Table dimensions: 200 x 160 mm with pneumatic punching tool mounted Auction-ID: A7-46287-218

Machine number: 5076 Operating voltage: 380 V Connection: 12 kW Panel dimensions: 2250 x 1200 mm with 4 cylinders Reference: Common - Lot 70 Auction-ID: A7-46763-171

with mounted punching tool Auction-ID: A7-46287-175

Delivery date: 1961 Press force: 63 t Largest sheet thickness: 10 mm Stroke rate: 65 1/min Ram stroke: 8 - 100 mm Lifter adjustable: 63 mm Greatest distance between table and ram at max. stroke bottom, adjustment top, table bottom: 450 mm smallest distance between table and ram at max. stroke bottom, adjustment top, table top: 180 mm for further technical data see nameplates Table dimensions below: approx. 610 x 470 mm top table dimensions: approx. 310 x 260 mm Auction-ID: A7-46287-183

Combustion engine: 15 hp (11 kW) Electric start with 12 V battery Belt drive Recommended material moisture: 10–18% Production Capacity: Feed pellets: 200–300 kg/h Wood pellets: 80–120 kg/h Compatible materials: sawdust, refined crushed straw, cereals Dimensions (L × W × H): 1240 × 800 × 900 mm Net weight: 330 kg Gross Weight: 420 kg Auction-ID: A1-45887-127

Table dimensions: approx. 190 x 110 mm incl. installed tools Auction-ID: A7-46287-207

Serial number: 105 Pressure: 6/7 bar on base Reference: Groven - Lot 15 Auction-ID: A7-46763-313

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-43528-562

Table dimensions: 300 x 200 mm Reference: Groven - Lot 1 Auction-ID: A7-46763-307

Machine number: 2810292 Operating voltage: 380 V Connection: 1.5 kW Max. pressing force: 250 kN Projection: 190 mm Plunger strokes: 120/min Plunger adjustable: 5 mm Stroke adjustable: 4 - 60 mm Table dimensions: 550 x 430 mm incl. straightening device from the manufacturer REBENDER Auction-ID: A7-46287-156

Stroke: 12 mm Compressive force: 28 kN Delay time: 0.063 s min./max. operating pressure: 3/6 bar Table dimensions: approx. 200 x 160 mm Auction-ID: A7-46287-219

Serial number: 0069 Compressive force: 28 kN Stroke: 12 mm Delay time: 0.063 sec min./max. operating pressure: 3/6 bar Table dimensions: approx. 200 x 150 mm incl. installed punching tool Auction-ID: A7-46287-212

Machine number: 2-0151 Compressive force: 28 kN Stroke: 12 Table dimensions: 200 x 170 mm with punching tool mounted Auction-ID: A7-46287-217

with approx. 3m hose. Auction-ID: A1-46805-30274

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool Auction-ID: A7-46287-213

Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-22

Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley Auction-ID: A7-46287-6

max. load: 25 kN Projection: 90 mm Plunger strokes: 220 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-210

Consisting of two punching stations, driven by pneumatic cylinders incl. Installed punching tool on pedestal Dimensions of the pedestal: 560 x 300 x 170 mm Auction-ID: A7-46287-206

Machine number: 2-0586 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 150 mm incl. installed punching tool Auction-ID: A7-46287-204

Serial number: 101 Pressure: 6/7 bar on base Reference: Groven - Lot 16 Auction-ID: A7-46763-314

CNC-controller Delem DA-65R, bending pressure 1100kN, working lenght 3100mm, capacity - 7,5kW, voltage - 3PH 380 Volt, hydraulic oil - 120l Auction-ID: A7-46486-1

Offer 26134 Technical data: - Pressure capacity 160 t - Working width 3080 mm - Passage between the uprights 2550 mm - Projection 250 mm - Installation height 400 mm - Feed speed 100 mm/sec. - Working speed 7 mm/sec. - Retraction speed 70 mm/sec. - Ram stroke 160 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2850 x D 1800 mm - Weight approx. 7800 kg - with: - Swivel arm – control panel with control CYBELEC DNC 60 - Mot. Back gauge up to 625 mm - Crowning device - Lasersafe - 4-fold universal die split, split V-matrices, - Split sharpening tool, etc. - Two-hand control panel, foot switch, - Separate tool cabinet mobile

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-362

Includes extra connection piece, hose on roll, air hose. Auction-ID: A1-45771-55

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-361

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-525

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46416-405

Immediately deployable. Viewing by appointment. Auction-ID: A1-40256-2209

Equipped with: Hour position: 339 hours, turntable, extraction, pressure vessel, doors over the full width 1780 mm and depth 1800 mm of the cabin, with hatches in the doors for long objects; Turntable ø 1500mm, on rails, can be driven out of the cabin, external blast pot with automatic recovery (recycling system). Large size extraction, type: SO-250p, motor power: 4.0 Kw; sound attenuation on exhaust; with speed control and automatic filter cleaning; Cyclone pre-separator. including 3-fold LED lighting. The Sant-Tech PK-180 blasting cabinet set (year of construction 2020) consists of a cabin (±1.5–1.8 m wide, 0.8–1.0 m deep, 1.9–2.0 m high, ±800 kg) with 230V supply, air consumption ±12,000 l/min and working pressure 2–8 bar, combined with a ZO-250P extraction (400V, 4 kW, 4–6 bar, ±250 kg, approx. 0.8–1.0 × 0.8–1.0 × 2.0–2.3 m) and a 40-litre pressure vessel (wor ...