hydraulic motor used for sale

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder single-acting stroke 20 mm -Type:E0400180H30020 T17 / E0400180H 30020 T19 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 220 mm -Hole: 1x Ø14 mm / 5x Ø15 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 50 x 220 mm -Weight: 2.8 kg/piece

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 250 mm -Total length retracted: 600 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Dimensions: 460/170/H140 mm -Weight: 17.7 kg

Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, -Hydraulic screw connection: size 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 15x hydraulic screw connection available -Price per piece -Total dimensions: 105/26/H114 mm -Weight: 1.2 kg/pc.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 940 mm -Total length: retracted 1080 mm -Admission: cylinder: Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Number: 2 pieces -Dimensions: 1080/156/H110 mm -Weight: 24,2 kg/piece

Hydraulic pump, oil pump, gear pump -Manufacturer: Casappa, hydraulic pump -Type: PLP30.27DO-83E3-LGF/GE-N -Shaft: Ø 19 - 22 mm M14 x 1.5 - Connection: G3/4 , G1 -Dimensions: 175/125/H155 mm -Weight: 9kg

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 304 mm -Total length retracted: 600 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 600/225/H135 mm -Weight: 24 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 75 mm -Piston rod: Ø 40 mm -Mounting holes: Ø40 x 45 mm / Ø40 x 28 mm -Cylinder: outer Ø 106 mm -Number: 2 cylinders present, rod head: 1 pc. bolted, 1 pc. welded -Price: per piece -Dimensions: 520/145/H110 mm -Weight: 18 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 -Pump: Nominal pressure 250 bar -Drive: Behncke QU FA 00L4B-41 -Power: 3 kW 1442 rpm -Dimensions: 620/300/H270mm -Weight: 50kg

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 195 mm -Piston rod: Ø 30 mm -Bolt circle: Ø 170 x 18 mm -Dimension: Ø 210 x 345 mm -Weight: 10.9 kg

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: from automatic band saw -Piston rod: Ø 30 mm -Stroke: 380mm -Piston rod mount: M16 -Dimensions: 605/105/H95 mm -Weight: 12.4 kg

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: Universal tank made of aluminum, unused -Tank capacity: approx. 230 l -Connections: see photos -Dimensions: 565/485/H1215 mm -Weight: 40 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe: Outer diameter mm -Stroke: 170 mm -Total length when retracted: 405 mm -Mount: Bore Ø 30 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 3 pieces -Dimensions: 405/110/H100 mm -Weight: 9.3 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Plessey, hydraulic pump type A096X -Electric motor: EMI Type D 112/2R-6/8 24 Volt / 2 kW -Dimensions: 290/115/H130 mm -Weight: 10 kg

Key data: 200 t

Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

Axial piston pump, hydraulic pump, oil pump, gear pump -Manufacturer: Rexroth -Pump: Type LA10VS0 45 DFLR/31R-PPA12N00 -Electric motor: Siemens -Type: 1 LA5163-4AA96-Z IEC160M -Drive: 11 kW -Speed: 1460 rpm -Dimensions: 950/500/H510 mm -Weight: 138kg

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, lifting cylinders -Hydraulic cylinder: single-acting stroke 240 mm -Piston rod: Ø 130 mm -Hole circle: Ø 205 x 14 mm -Dimensions: Ø 230 x 465 mm -Weight: 57 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 302 mm -Total length: retracted 640 mm -Mount: Bore Ø 40 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 640/145/H210 mm -Weight: 38 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 1200 mm -Piston rod: Ø 85 mm -Operating pressure: 200 bar -Pressure load: max. 10 t -Quantity: 2x cylinders available -Price: per piece -Dimensions: Ø 118 x 1860 mm -Weight: 118 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 1700 mm -Piston rod: Ø 45 mm -Dimensions: Ø 75 x 2100 mm -Weight: 40 kg

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shear -Piston rod: Ø 140 mm -Stroke: 170 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 270/270/H565 mm -Weight: 326 kg/unit

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.