hydraulic motor used for sale

Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Hydraulische Presse / Hydraulic Press Lechner ST UST IASerial-No. 1438Year 1980

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

TAYLOR Hydraulic Rotary Clamp - Working length mm. 2400 - Working width mm. 800 - 20 sections - N. 3 pressers for each section

RODEA hydraulic folding clamp mod. S - CE standard - Year 2002

Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -

pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

pressure: . t throat: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Beyeler RH 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: manual Passage between uprights: 2630 mm Max stroke: 215 mm Max distance between table -- ram: 410 mm Depth of throat: 255 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Electric motor (power): 5,5 kW Length: 3300 mm Depth: 1550 mm Height: 2450 mm Weight: 7 ton

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

LVD PPS-TS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: Cadman Express Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 16 kW

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

SC7 CNC-besturing: - automatische snijhoek - mes spel automatisch - automatische achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 12 ton

sheet width: mm plate thickness: mm distance between columns: mm digital: working width: 4500 mm : 8mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, gear pump -Drive: 2.2 kW 1420 rpm -Dimensions: 550/280/H260 mm -Weight: 40 kg

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton