hydraulic motor used for sale

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

SMG DS 40 hydraulic press was built in 2000 in Germany by SMG Süddeutsche Maschinenbau GmbH. The machine, which is characterised by high reliability, is used in metal stamping and punching. The machining process is performed with a high press force of 40 tonnes, which, combined with a rigid body, ensures the manufacture of highly repeatable and perfectly precise parts. The parameters, i.e. the ram speed, the position of the work tables and the press force, are adjusted by means of a simple control based on limit switches. The SMG press weighs 4 tonnes. Technical specifications of the SMG DS 40 press - maximum press force (adjustable): 40 t - work table dimensions (L x W): 600 x 400 mm - stroke of upper working table: 150 mm - distance between work tables: 400 mm - dimensions (L x W x H): 1230 x 570 x 2500 mm - weight of the SMG DS40 machine: 4 t

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas HDMF 50/36x550 -Type: HDMF 50/36x550/VORM HS 3750 -Stroke: 550 mm -Piston rod: Ø 36 mm/M22 x 1.5 -Total length retracted: 805 mm -Dimension: 805/160/H160 mm -Weight: 22.3 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 88 mm -Piston rod: Ø 32 mm -Mounting holes: Ø25 x 23 mm / Ø32 x 45 mm -Cylinder: outer Ø 118 mm -Dimensions: 455/160/H120 mm -Weight: 15.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 185 mm -Piston rod: Ø 20 mm / thread Ø20 x 178 mm -Cylinder: outside Ø 65 mm -Dimensions: 470/110/65 mm -Weight: 4.4 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 20 mm/M16 -Stroke: 100 mm -Cylinder tube outside Ø 40 mm -Total length retracted: 280 mm -Admission: hole Ø 20 mm -Dimensions: 280/40/H60 mm -Weight: 2.2 kg

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 77 mm -Piston rod: Ø 40 mm / thread Ø36 x 66 mm -Dimensions: 400/107 / H117 mm -Weight: 12.9 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 160 bar -Liter output: approx. L/min -Drive: 11 kW 1440 rpm -Dimensions: 710/280/H325 mm -Weight: 102 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 600 mm -Piston rod: Ø 22 mm / M16 -Dimensions: 800/75 / H70 mm -Weight: 11 kg

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

Specifications: - working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. Cutting angle adjustment - man. Cutting gap adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment - 17 pcs. Hydraulic hold-downs - front angle stop - front support arms - Drive 400 V / 9 kW - Foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg

Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.

BOMAG BS 180 Grit Spreader for Roller / Grit Spreader Sprayer for Compactor, Grit Spreader & Hydraulic Arm, Year 2008

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Hydraulic filter, filter element -Manufacturer: Hydac, filter element OVP -Type: 1300 R 040 AM -Dimension: Ø 144 x 483 mm -Weight: 4 kg

Specifications: - working width 4050 mm - max. cutting capacity St 40 6 mm - Cutting gap adjustment - Stroke rate depending on cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - Hydraulic hold-downs - front angle stop - front support arms can be moved laterally - Drive 400 V / 15 kW - Foot switch - Space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - Weight approx. 10800 kg

Hydraulic filter, filter element -Manufacturer: Hydac, filter element Betamicron OVP -Type: 0660 R 010 BN4HC -Dimension: Ø 115 x 334 mm -Weight: 1,8 kg

Used hydraulic power unit Radial piston pump BOSCH REXROTH Type: PR4-30/6.30-500RA01M01 WNR:R901088867 Q: approx. 8 l/min p max: 500 bar Engine 11 kW 1460 rpm 500V Tank: approx. 80 l Dimensions: approx. 1100 x 800 x 800 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1700 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1500 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 4x2000 SMO-2004-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° Eufzrzpm0 - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working len ...

Hydraulic filter, filter element -Manufacturer: Hydac Betafit, filter element Betamicron OVP -Type: 1.06.08 D 03 BN -Dimension: Ø 152 x 207 mm -Weight: 1.6 kg

Hydraulic filter, filter element -Manufacturer: Hydac Betafit, filter element Betamicron OVP -Type: 1.11.16 D 03 BH Art.No. 1262439 -Dimension: Ø 80 x 425 mm -Weight: 2.2 kg

Hydraulic filter, filter element -Manufacturer: SF Filter, filter element OVP -Type: HY 20659 -Dimension: Ø 78 x 210 mm -Weight: 0.6 kg

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x3200 SMO-3206-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm Eehs322 - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade ...