133,845 used machines on RESALE, but how to find them? Machine Search
CONTROLS PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock quick die change system: no feedstock transport direction: left to right SLIDE total force (nominal): 400 to stroke: 230 mm stroke rate (max.): 35 /min SLIDE (HYDR. PRESS) approximation velocity max.: 120 mm/s working velocity min.: 5 mm/s working velocity max.: 50 mm/s return velocity max.: 135 mm/s COUNTER RAM nominal force: 100 to stroke: 40 mm V-RING nominal force: 200 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 1050 mm lower table (front-back): 800 mm upper table (left-right): 800 mm upper table (front-back): 800 mm shut height max.: 410 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 350 mm sheet thickness max.: 16 mm feeding step min.: 1 mm fee ...
RODCRAFT WP100P workshop press ; hydraulic pneumatic and manual with 2 speeds ; suitable for pressing, straightening and assembly work ; Capacity: 100 tons; Air pressure: 7.5 – 8.5 bar ; Cylinder stroke: 300 mm ; Inner frame width: 787 mm ; Drevelset: yes ; Weight approx. 800 kg; Aged model
DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4
Equipped with: demolition hammer, for crane of 25-30 tons, length hammer without axe 2.2m, no hoses or head plate available. Auction-ID: A1-40137-283
Cutting capacity: 340 mm (round) / 340 x 340 mm (square) Power: 8 kW Power supply: 400 V / 50 Hz Hydraulic clamping Integrated coolant system Chip conveyor present
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 44
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Auction-ID: A1-46501-2085
Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-195
Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ;
Euromac 220/6 A.V. hydraulic notcher; variably adjustable with hydraulic control; suitable for precise cornering of steel; Voltage: 380 volts ; Capacity: 220 x 220 x 6 mm steel ; Hydraulically adjustable: yes ; Blade height adjustable: yes ; Foot control: yes ; Manual control: yes ; In neat condition;
Chisel diameter: 140 mm; Hose diameter: 1 inch; Working pressure: 200–240 bar; Oil flow: 160–200 L/min; Crusher weight: 1,875 kg; Stroke frequency 320–650 bpm; Unused Auction-ID: A1-40137-259
Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. excavator bucket, unused machine Auction-ID: A1-40418-12
Holzmann hydraulic scissor lift table, SHT310 with Holzmann top frame, SHT310PAR Versatile scissor lift table: as an additional workstation (adjustable/ergonomic working height for the respective work) as a filing aid for machine loading with the optionally available plate attachment frame SHT310PAR up to 310 kg load Equipped with: two foot pedals, one for hydraulic lifting and one for lowering the work table to an ergonomic and individual working height Two swivelling castors for easy manoeuvring, with parking brakes ensures additional safe positioning a large work surface of 1580 x 900 mm as well as a minimum table height of 470 mm and maximum table height of 1075 mm round off the product Holzmann Top Top Frame, SHT310PAR Panel top frame suitable for our SHT310 for easy handling of larger panels Track rollers on the frame allow for easy loading and unloading of plates Swivel mechani ...
Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. bucket and spoon board, unused machine Auction-ID: A1-40418-310
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-116
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-237
Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
3x Gressel Grepos-5x for true 5-axis complete/simultaneous machining with plate. 4-40 kn Auction-ID: A1-46607-15
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm
Hydraulic Spare Parts – Assorted Lot General data: Equipment type: Hydraulic components and spare parts Condition: Used / partly new (mixed lot) Included items: Hydraulic directional and pressure control valves Solenoid valves (electro-hydraulic) with coil housings and manual overrides Manifold-mounted valve blocks Electrical coil connectors Brands: Likely Bosch Rexroth and other European OEM manufacturers Highlighted component: New spare valve (boxed) Label: Dr. Begr. Ventil ECG-06-F10-TG-GF/60” Type: NG6 / CETOP 3 hydraulic valve Additional equipment: Hydraulic pump / motor unit (blue housing, likely Rexroth) Description: Assorted lot of hydraulic spare parts including control valves, solenoid valves, manifold blocks, and pump units. Suitable for maintenance, repair, and industrial applications. Includes both used and new components, ideal for worksho ...
Technical details Manufacturer: Genkinger (Hermann Genkinger KG) Model: AE 3/6 Year: 1976 Type: Hydraulic lift table cart Operation: Manual hydraulic system (foot pump) Load capacity: 300 kg Own weight: Approx. 100 kg Configuration: Scissor lift mechanism Platform: Steel loading platform Mobility: Industrial castor wheels with push handle Application: Ergonomic lifting and transport of materials in workshop and production environments Dimensions and weight (approx.) Length: 800 mm Width: 600 mm Height: 900 mm Weight: 100 kg Auction-ID: A7-46498-123
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
REIS TUS 70 OK-70 – 4-Column Hydraulic Spotting Press General data: Manufacturer: Reis Model: TUS 70 OK-70 Machine number: 01.094.00 Year of manufacture: 1991 Machine type: 4-column spotting press (hydraulic) Weight: approx. 8000 kg Technical details: Pressing force: 700 kN Maximum pressure: 220 bar Equipment: Hydraulic swing-out upper table Movable lower table Control system: Reis PE-NC2511 Description: Industrial 4-column hydraulic spotting press REIS TUS 70 OK-70 designed for die spotting, tool adjustment, and mold alignment operations. The machine features a robust construction, movable lower table, and hydraulic swing-out upper table, enabling precise positioning and efficient setup processes in toolmaking and production environments. Auction-ID: A7-46498-83
MÜLLER CT16.4.1 – Hydraulic Press General data: Manufacturer: Müller Model: CT16.4.1 Machine number: 221 094 A110 Year of manufacture: 1991 Machine type: Hydraulic press Technical details: Pressing force: 16 tons Description: Compact hydraulic press MÜLLER CT16.4.1 designed for pressing, forming, and assembly operations. Suitable for workshop and industrial applications requiring controlled pressing force and reliable operation. Auction-ID: A7-46498-107
For ITR hydraulic hammer; Auction-ID: A7-46458-47
maximum number of results exceeded
please refine your search
