hydraulic cylinder used for sale

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 € : 1695.33 € : 85 to : 500 mm : 700x400 mm : 800x600 mm : 600 mm : 300 mm : 105 mm/s : 41 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 1200 mm : 1600 mm : 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 € : 2608.2 € : 170 to : 500 mm : 870x500 mm : 1000x600 mm : 600 mm : 300 mm : 110 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 19 kW : 1500 mm : 1950 mm : 2650 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 € : 729.62 € : 70 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 250 mm : 24 mm/s : 5 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil coo ...

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1181.25 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 300 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil c ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 € : 1549.8 € : 200 to : 500 mm : 870x500 mm : 1000x600 mm : 500 mm : 300 mm : 21 mm/s : 3 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3000 mm : 8200 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 € : 2268 € : 300 to : 500 mm : 1000x500 mm : 1200x800 mm : 600 mm : 400 mm : 22 mm/s : 2 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3100 mm : 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve � ...

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1228.5 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1347.57 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1474.2 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 46400 € : 886.24 € : 100 to : 500 mm : 700 x 350 mm : 800 x 600 mm : 500 mm : 300 mm : 25 mm/s : 4 mm/s : 4 kW : 1900 mm : 1200 mm : 2600 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-4

Hydraulic crimping pliers Burndy Hypress Y35 B20 No more pressing effect. The crimping pliers lay in the workshop for years. The oil and seals should be replaced. The sale is made as a spare part / defective Margin taxation in accordance with § 25a UstG. VAT is not shown separately. Internal NR 672-SB-72 Crimping Tool - Hydraulic Crimper - Lug Press - Crimping Pliers - Crimping Tool - Crimping Tool - Crimper - Crimping Tools

Hydraulic crimping pliers STOCKO 0203468 The pliers press, but no longer loosen. The crimping pliers lay unused in the workshop for years. An overhaul is required. The sale is made as a spare part / defective. Margin taxation in accordance with § 25a UstG. VAT is not shown separately. Internal NR 673-SB-73 Areas of application & details: Hydraulic Crimping Pliers STOCKO 0203468 - Crimping Pliers - Hydraulic Crimping Tool - Cable Lug Press - Crimping Pliers - Crimping Tools

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 456 398079651365

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 455 257573212856

Hydraulic motor Manufacturer: LöSi Hydraulik GmbH Model: EPMT-S 500 The device is NEW and fully functional. see pictures for more details. Internal number: 613 471 257398548157

Location: 91701 Trnava Condition: Never used. Auction-ID: A1-50694-120

discharge pressure: 1000KN, stamping surface: 2x L900 x W750mm, equipped with motor-driven roller conveyor, 1x support table, 1x oil pump generator, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes 4x rack with die-cuts, 3x green plastic plate and 1x solid core plastic top Auction-ID: A1-50060-10

Hydra Rig / NOV Hydraulic Spooler Unit Manufacturer: Hydra Rig / NOV Completion & Production Solutions Country of manufacture: United Kingdom Manufacturing date: 02/2020 Equipment type: Hydraulic Coiled Tubing Spooler Unit Location: 84107 Bratislava Heavy-duty hydraulic spooler unit designed for handling, supporting and spooling coiled tubing and reel assemblies in drilling and well-service operations. Skid-mounted construction with an adjustable reel-support arrangement. Configuration / equipment: Hydraulic reel-support arms Powered drive assembly / gearbox Hydraulic cylinders Hydraulic hose assemblies Control and manifold components Adjustable reel-support arrangement Heavy-duty skid-mounted frame Note: Reel / drum is not included with the photographed unit. Condition: Never used. Operational condition and hydraulic functionality have not been verifie ...

Press pressure: 300 ATM, with oil pump unit, including rack with 6 outrigger plates, plate size: L1370 x W660 mm Auction-ID: A1-50060-11

press pressure: 1000KN, punching surface approximately: 2x L900 x W720 mm, equipped with motor-driven roller conveyor, 1x support infeed table, 1x oil pump generator, motor power: 7.5 KW, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes rack filled with leather dies and 2x green plastic plate Auction-ID: A1-50060-9

press pressure: 1500 KN, punched surface dimension: L1700 x W1065 mm, equipped with Sick optik electronik personal laser curtain protection, 1x oil pump generator and safety fencing, 1x spare base plate Auction-ID: A1-50060-12

Key data: 200 t

Manufacturer: Müller Model No.: CE 200.1.1 Year: 1972 Condition: Used Stock number: 9604 Compressive force: 200 t

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-50718-39

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-64

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-63

Weight 10 kg, incl. clamping inserts 6, 8, 10, 12 and 16 Auction-ID: A1-50626-12

De Ryck tandem axle tipper, built in 2026. Equipped with 2 axles and a maximum weight of up to 3,500 kg. Features hydraulic tipping body, electro-hydraulic OMFB 12 V / 2,000 W pump unit, own battery and wired keyed controls for lifting and lowering the body. Equipped with KNOTT overrun brake, jockey wheel, handbrake, safety cable and galvanized chassis. Open cargo box with raised front rack. See photos and video(s) for a further impression of the execution, operation and condition. Auction-ID: A3-46136-22063

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with hydraulic power unit. Power supply: 400 V, three-phase. Motor power (per nameplate): 2.5 HP. Control system: Electrical cabinet with Siemens LOGO! mini PLC. Weight (per nameplate): 1,500 kg.

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.

Hydraulic Marine Fishing Net / Rope Winch Heavy-duty hydraulically driven marine winch suitable for hauling and handling fishing nets, ropes, lines and aquaculture equipment. The unit is equipped with a large horizontal drum, hydraulic motor, directional control valve and structural steel frame. Machine type: Hydraulic marine fishing winch Drive: Hydraulic motor Drum: Horizontal winding drum loaded with steel wire rope Controls: Manual directional control valve and handwheel-operated mechanism Hydraulic hoses: EN 853 1SN, WP 105 bar Features: Reduction gearing, hydraulic hoses, guide/bollard posts and steel support frame Approximate dimensions: 1,500 x 1,100 x 1,300 mm Approximate weight: 750 kg The winch is offered in used condition with visible corrosion on the drum flanges, wire rope and internal components. The frame appears structurally substantial and has b ...

MAN TGM 18.290 4x2 truck from 2010, equipped with open body with folding side boards and hydraulically operated ramps at the rear. Equipped with a 6,871 cc diesel engine with an output of 213 kW (approx. 290 hp), Euro 5 emission class and sleeper cab. Odometer reading at recording: 637,466 km. Own weight approximately 7,780 kg and maximum permitted mass 19,000 kg. Equipped with spare wheel and roof hatch. Belgian vehicle documents available. Inspection certificate valid until 08/07/2026. Vehicle starts, drives and brakes. The operation of the hydraulic ramps can be seen in the video. Auction-ID: A3-46136-22122

70mm head Auction-ID: A1-50476-128

- Includes: - 1 x OLEOMEC hydraulic power unit: 3 KW-1430 rpm motor, maximum pressure 100 Bars. - 1 x OLEOMEC hydraulic power unit: 4 KW-2850 rpm motor, maximum pressure 100 Bars. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-58

Lot of Three Hydraulic Drive Components Lot comprising three heavy industrial hydraulic drive components with cast housings, hydraulic ports, control sections and splined shafts. Quantity: 3 units Identified manufacturer: Mekior / Hidro-Bat Identified model: 6R070MHP/20 Additional marking: C8C/3C00 Serial number: MHP000121 Additional number: 201129897 Configuration: Hydraulic motor/drive component with splined shaft Condition: Used, untested, suitable for repair or parts Approximate dimensions: 600 × 400 × 450 mm Approximate weight: 110 kg The components show surface oxidation, paint deterioration and storage wear. Shaft areas have been protected with tape, while several hydraulic ports and interfaces are exposed. The main housings appear intact, but internal hydraulic condition, pressure performance and serviceability have not been verified. Auction-ID: A ...

Robust MAN M18 F truck equipped with a hydraulic tipper / container lift system, sold with its blue metal open tipper. A professional configuration suitable for construction sites, earthmoving, demolition, public works, material transport or waste disposal. Features: First put into service: 10/12/1990 Diesel Manual gearbox Mileage displayed: approx. 540,862 km 2 axles – 4x2 configuration 1 drive axle Mechanical suspension 2 seats Unladen weight: 9,280 kg MMA: 18,300 kg Calculated payload: approx. 9,020 kg Train MMA: 32,000 kg WINE: WMAM052454M120653 Open body included Hydraulic lifting/handling system Multiple hydraulic controls Side Trunks Work lights Belgian registration The vehicle is accompanied by its Belgian documents: registration certificate, certificate of conformity and technical inspection documents. Technical inspection valid until 29/10/2026. The  ...

\" ELMALI EHSP-150 Hydraulic Deep Drawing Press Manufacturer: Elmali Makina Sanayi ve Ticaret Ltd. Sti. Model: EHSP-150 Machine type: Hydraulic Deep Drawing Press Year: 2021 Serial number: EHSP-150/150 S.01 Certification: CE compliant Working hours: 0 h Heavy-duty hydraulic press designed for deep drawing, stamping and forming of sheet metal. The machine is reported as never used, with 0 working hours. Equipped with ELMALI touchscreen control, separate control cabinet and remote operator station. Technical specifications: Press force: 150 tons Motor power: 30 kW Table / ram dimensions: 1,000 × 1,200 mm Stroke: 600 / 250 mm Hydraulic oil: ISO VG 46 Approx. dimensions (L × W × H): 2,200 × 1,900 × 4,300 mm Machine weight: Approx. 10,500 kg Equipment: ELMALI PLC touchscreen control Separate operator control cabinet Remote operating station Hydraulic po ...

Hydro-Pack Hydraulic Pump/Motor Units with Parker Hydraulic Component Separate lot of used hydraulic components comprising approximately three Hydro-Pack hydraulic pump/motor units, a Parker hydraulic unit and one mechanical hydraulic control/drive assembly marked HIDRAULIKA”. Hydro-Pack code: P10100SF131 Hydro-Pack serial numbers: 24.01.647636 and 22.23.97423 Quantity: Approximately 3 hydraulic pump/motor units, 1 Parker hydraulic unit and 1 Hidraulika control/drive assembly Hydro-Pack features: Splined shafts, threaded hydraulic ports and mounting flanges Additional components: Associated shafts and couplings may be included Approximate dimensions of main unit: 450 x 280 x 300 mm Approximate weight of main unit: 35 kg The components are offered in used condition after outdoor storage. The Hydro-Pack housings appear intact, with identification plates, capped por ...

Used heavy-duty heated press for woodworking applications, suitable for gluing, veneering and pressing of wood and wood-based panels. Robust industrial construction with heated platens for even distribution of temperature and pressure. Ideal for professional joinery workshops and furniture production. Features: - Heated operation - Useful working size: 3000 x 1300 mm - Heavy-duty construction - Suitable for woodworking applications - Used - fully operational Brand, press force, number of cylinders, electrical connection and further technical specifications are not confirmed for this specific unit - please contact us for details. Used, fully operational Auction-ID: A7-50988-33

Heavy-Duty Hydraulic Trawl Winch Used marine trawl winch suitable for deploying, retrieving and controlling trawl gear and steel wire rope. The winch is equipped with a large steel wire-rope drum, hydraulic drive, chain-and-sprocket transmission and level-wind mechanism. Machine type: Hydraulic marine trawl winch Drive: Hydraulic motor and gear drive Drum: Large steel drum with steel wire rope Transmission: Chain-and-sprocket drive Level wind: Grooved traversing screw with guide rollers Additional equipment: Bronze-alloy warping head and manual control/locking levers Construction: Fabricated steel side frames and base Approximate dimensions: 2,200 x 1,600 x 1,700 mm Approximate weight: 1,800 kg The winch is offered in used condition with extensive corrosion on the wire rope, shafts, chain drive, fasteners and hydraulic components. The wire rope, hydraulic drive ...

Used hydraulic press. Condition: Used, in working condition Auction-ID: A7-50988-149

Compact mechanical/hydraulic vice, with face size: 101 x 48 mm, stroke: 0-125 mm, clamping force 36 kN (3528 kgf). Packaging size 600 x 220 x 180 mm. Item weight 27 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 600 x 210 x 250 mm; Approx. Weight: 27kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-101

De Ryck double-axle tipper/box trailer with a maximum permitted mass of 2,700 kg. Equipped with 2 axles with a permissible axle load of 1,350 kg per axle and a maximum nose weight of 120 kg. Equipped with electro-hydraulic tipping installation, 12 V hydraulic unit of 1,600 W and wired control for lifting and lowering the body. Galvanized chassis, support wheel and overrun brake present. Chassis number: YA922G270N0130155. Operation of the tipping system visible on the video. Auction-ID: A3-46136-22069

Fassi F115A.0.23 E-ACTIVE Hydraulic Knuckle-Boom Crane Used Fassi articulating hydraulic loader crane suitable for lifting, positioning and handling loads. The crane is equipped with multiple hydraulic boom sections, hydraulic cylinders, electronic controls, radio remote control and attached hydraulic hoses. Manufacturer: Fassi Gru S.p.A. Model: F115A.0.23 E-ACTIVE Year of manufacture: 2019 Serial number: 1503-2196 Electrical system: 24 V Crane type: Hydraulic articulating / knuckle-boom crane Controls: Fassi electronic control system and fixed control panel Remote control: Fassi radio remote handset with display and emergency stop Approximate dimensions: 4,200 x 1,500 x 2,100 mm Approximate weight: 1,300 kg The crane is offered in used condition with surface corrosion, paint deterioration and wear around fittings, pins and exposed components. The crane has b ...

Manufacturer: Hydraram Model: TSR-2W Year of construction: 2026 Serial Number: 26TSR2-93 Hydraulic sorting grab for mini excavator Suitable for carrier devices of 1–2 t Net weight: 95 kg Max. operating pressure: 210 bar Oil requirement opening/closing: 15 l/min Sturdy steel construction 360° hydraulically rotatable Hydraulic hoses included Very good optical condition Fully functional No noticeable weld repairs or structural damage Ideal for sorting, demolition, gardening and landscaping work, as well as wood, stone and recycled material CE marked Sale is made as shown in the pictures Technical data: Manufacturer: Hydraram Type: TSR-2W Year of construction: 2026 Weight: 95 kg Operating pressure: max. 210 bar Oil volume gripper: 15 l/min Application: Mini excavator 1–2 t Scope of delivery: 1 × Hydraram TSR-2W Sorting  ...