128,440 used machines on RESALE, but how to find them? Machine Search
This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.
This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.
throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2000. This Netstal Synergy 1500-460 features a clamping force of 1500 kN and an injection force of 279 kN. It offers an opening stroke of 0â450 mm and a mould height range of 400â700 mm. If you are looking to get high-quality moulding capabilities, consider the Netstal Synergy 1500-460 machine we have for sale. Contact us for further details.
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-199
Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.
HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-45737-140
pressure: 100 t stroke: 220 mm daylight between the columns: 1190 mm dayligth: 700 mm : 190 mm diameter of piston: 120 mm table surface area: 1600 x 800 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,9 x 1,4 x 2,0 m Side-adjustable cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-200
Key data: 1250 mm, 4 mm
Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg
CONTROLS PLC SIEMENS PRESS DESIGN drive system: hydraulic SLIDE total force (nominal): 500 to stroke: 225 mm stroke rate (max.): 60 /min SLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 15 mm/s working velocity max.: 44 mm/s return velocity max.: 200 mm/s COUNTER RAM nominal force: 100 to stroke: 30 mm V-RING nominal force: 200 to TOOL DIMENSIONS shut height max.: 420 mm ram adjustment: 100 mm distance between columns (H-frame): 880 mm passline opening (free passage in side columns): 470 mm range of transfer pins - in strip direction: 394 mm DECOILER design: cradle sheet width max.: 300 mm LEVELLER UNIT sheet thickness max.: 12 mm STRIP-FEEDER feeder type: grip feeder CROP SHEAR cutting force: 500 kN ELECTRICAL SPECIFICATIONS total power consumption: 100 kW Pres ...
Hydraulic shearing machine manufactured in 2003. This GASPARINI CO 3006 features a maximum cutting capacity of 6 â 8 mm and an installed power of 11 kW. Weighing 9.0 t, it operates at a minimum pneumatic pressure of 6 bar. If you are looking to get high-quality shearing capabilities, consider the GASPARINI CO 3006 machine we have for sale. Contact us for further details.
Hydraulic Puller YALE HPS-2/0.7A with YS-10/150, 700 bar, 100 kN, Stroke 150 mm, Case
Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine.
Key data: 30 t
DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...
Key data: 1 t
Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power
6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-91
Defects: air leakage (upper frame); incomplete cycle; oil leakage on hydraulic cylinders; machine not operated for ~6 years; further faults possible; sold for repair/parts Auction-ID: A7-40553-25
Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.
General information Brand: New Holland Construction Model: E26C Type: Hydraulic excavator (mini excavator) Series/Type designation: M-TRAC Identification & production Product Identification Number (PIN): NCE2600003195 Machine / chassis no.: E26C 3195 (as visible on nameplate) Year of construction: 2021 Made in: South Korea Engine manufacturer: CNH Industrial Italia S.p.A. ⚙️ Technical data Engine power: 18.8 kW Max. certified weight: 3500 kg Noise level sticker: LwA 94 dB Hours Read operating hours: 124.5 hours ️ Equipment & options (visible) Closed cab (with heating/ventilation) Joystick control Rubber tracks Cover blade (dozer blade) Hydraulic quick coupler Excavator bucket available Additional hydraulic lines on the arm Auction-ID: A3-43520-11424
S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!
Year of delivery: 1994 Factory number: 035-021/73 Nominal force: 100 kN Permissible delay time: 118 ms Safety distance hand control tool: 190 mm Table dimensions: 500 x 400 mm Passage: approx. 100 mm incl. A thermoforming device with foot pedal Auction-ID: A7-46287-209
S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !
S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !
Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.
4\" Hydraulic pressure 2500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 470 x 185 x 130 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-222
MAN TGS 33.540 6x4 BL – Truck with Loading Crane General data: Manufacturer: MAN Model: TGS 33.540 6x4 BL Serial number (VIN): WMA30SZZ9BM567249 Year of manufacture: Unknown Condition: Used Power: approx. 540 HP Drive: 6x4 Gross vehicle weight: approx. 26000 kg Dimensions (L x W x H): approx. 10000 x 2550 x 3800 mm Equipment: Hydraulic loading crane Crane: Kogel, 10 ton-meter, hydraulic telescopic arm + rotor + grab Reach: approx. 9 – 10 m Lifting capacity: approx. 3500 kg (close range) to 1000 kg (full extension) Maximum pulling force: 200 kN Trailer coupling Timber stakes for log transport Reinforced chassis Multi-axle configuration Description: Heavy-duty truck equipped with a hydraulic loading crane, designed for forestry, recycling, and construction applications. The vehicle allows self-loading and unloading of bulky materials such as logs, scrap, or ...
Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.
Serial number: 042-024/51 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220/60V Connection: 17 kW Nominal current: 80 A Nominal force: 1000 kN Operating pressure Speed: 200 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between table and plunger: 800 mm Table dimensions: 900 x 560 mm Auction-ID: A7-46287-125
Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800
Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm Auction-ID: A7-46287-20
The trailer is in good condition with user damage here and there. Has a hydraulic tipper. With ramps and with attachment boards. Auction-ID: A3-43369-34000
Power: Hydraulic system; pw. N/C Operating parameters: Loading area 2,500 x 6,900 mm; operating hours ~100 h; dim. 8,000 x 2,500 x 2,000 mm; wt. 4,000 kg Workpiece capacity: Material handling; loading/unloading operations (scrap, timber, bulk materials) Supported edges: Industrial materials, scrap, wood (typ.) Edge types: Lifting; handling; loading Included equipment: Hydraulic arm; superstructure; remote control (included); mounting platform Compliance: Industrial handling equipment; CE N/C Power supply: Hydraulic (vehicle-mounted) Year/Manufacturer: 2023 / Atlas – 126.3E-A3 Remarks: Very low usage (~100 h); complete unit with superstructure and remote control; ready for installation/use Hydraulic loading arm with superstructure, suitable for trucks or stationary handling applications. Auction-ID: A7-40553-20
Engine problem (reason unknown) - see video - air conditioning - overall neat condition, few signs of wear, solid chassis Auction-ID: A3-43369-10657
Strong and representative Mercedes Antos rigid built in 2016, ideal for transport, distribution or professional use. Equipped with automatic gearbox, working air conditioning and hydraulic tailgate. Familiar Mercedes solidity and comfortable handling. Starts without a booster, shifts and brakes well. Strong points: Mercedes Antos, Year of Build 2016, Euro 6, Automatic transmission, Working air conditioning, Large cargo box, Hydraulic tail lift available, Professional appearance, Belgian documents available, Inspection valid until 31/03/2026, Keys available - Technical data: Fuel: diesel, Power: 175 kW, GVW: 19.000 kg, Tare weight: 9.050 kg - Remarks / points of interest: Damage to the right rear, which damaged the operation of the tailgate. Tailgate is currently not working and needs to be checked/repaired. Engine malfunction light is on. Front right bodywork damage - signs of wear accor ...
Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm Auction-ID: A7-46287-28
Compact mechanical/hydraulic vice, with face size: 101 x 48 mm, stroke: 0-125 mm, clamping force 36 kN (3528 kgf). Packaging size 600 x 220 x 180 mm. Item weight 27 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 600 x 210 x 250 mm; Approx. Weight: 27kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-38
Includes: transport box 1230x810x1030mm, various accessories. Auction-ID: A1-45979-68
max. bar: 400 Serial number: 2121 Press force: 150 t Table dimensions: approx. 1500 x 560 mm Max. stroke: approx. 250 mm Auction-ID: A7-46287-169
3 UNITS/SETS OF ATT0012 PACKED TOGETHER. A SINGLE ATT0012 CORRESPONDS TO: 4\" Hydraulic pressure 2500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 470 x 185 x 130 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0012 PACKED TOGETHER: 470 x 555 x h130 mm - 69 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-72
With matching spoons of 1.80m. In good working condition. Lifting capacity 3.5 tons. Auction-ID: A3-43520-6044
Machine number: H74/247 Press force: 4 Mp Oil pressure: max. 200 atm Motor power: 1.1 kW Table dimensions: approx. 250 x 250 mm Auction-ID: A7-46287-208
already equipped with tachograph! - Working reversing camera! - automatic air conditioning - starts with booster (battery probably needs to be replaced, stood still for too long), drives and brakes properly - tow bar - 3 people - working d'Hollandia tailgate - engine light is on, probably due to bad battery Auction-ID: A3-43369-10869
6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-234
Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm Auction-ID: A7-46287-167
equipped with twistlock blocks; Please note! No steel cables, normally to be used in a set of 4 Auction-ID: A1-41994-6
Arnold Fresmak 200 machine vise; hydraulic version; equipped with degree adjustment; jaw width 200 mm; Jaw opening 380 mm. Auction-ID: A1-45170-21
maximum number of results exceeded
please refine your search
75 € 
