136,440 used machines on RESALE, but how to find them? Machine Search
Attention, defective Auction-ID: A1-47393-294
Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.
Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.
Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton
Load capacity 1000kg. Auction-ID: A1-47393-239
12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm
used
met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.
cutting dimensions max.: 600 x 1000 mm plate thickness: max. 3 mm cutting angle: 1,5 ° side stop electrical adjustable: 0 - 1010 mm rear stop electrical adjustable: 0 - 610 mm no. of strokes: 60 Hub/min total power requirement: 14 kW weight of the machine ca.: 8,7 t dimensions of machine L x W x H: 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton
sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2550 mm true cutting angle adjustable: - back stop - adjustable: max. 510 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 1,8 t dimensions: 3,3 x 1,4 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.
Key data: 200 t, 80 mm
Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg
Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg
Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg
Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from Battenfeld BA-T2400 injection molding machine -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Flow rate: l/min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620/H500 mm -Weight: 322 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg
Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg
Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Handover: in the current state as viewed -Use: as a spare part stock -Hydraulic unit: from Gruse lifting table ELT 1.5-10-1 -Motor: HPI 2.3 kW/2750 rpm -Hydraulic pump: HPI A5087577 -Price: per piece -Number: 2 pieces -Dimensions: 550/700/H180 mm -Weight: 39 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld injection molding machine -Type: PT-350/2.3/M/ FL 83 -Motor: ABB 11 kW / 1455 rpm -Individual components: see photos -Dimensions: 980/610/H490 mm -Weight: 184 kg
Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.
Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit, axial piston motor - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.
Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit: from automatic lathe SUGA type STS-2 -Manufacturer: Nachi Model VD 11B-25-25-AL -Motor: Toshiba type IK/FCKL3-I -Power: 1.5 kW/1400 rpm -Max. Pressure: 19.6 bar -Liter output: 25 l/min -Dimensions: 570/390/H250 mm -Weight: 51 kg
Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg
hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / pressure accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure display: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves see pictures -Number: 2 units available -Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW / 380/660V / 1425 rpm -Individual components: see images -Liter output: unknown -Dimensions: 900/520/H610 mm -Weight: 261 kg
maximum number of results exceeded
please refine your search
1 € 
