127,375 used machines on RESALE, but how to find them? Machine Search
Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x
Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated
hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
Hydraulic Machine Vise ARNOBock width: 200 mmJaw height: 60 mmClamping force: 8 ton. Clamping range: 0 to 370 mmOpening width: max 373 mmGuideway height: 140 mm- 2 clamping ranges adjustable via plug-in pins- TurntableDimensions L x W x H: 900 x 400 x 210 mmWeight: 125 kgGood condition; used
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg
For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader
Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used
without battery Auction-ID: A7-45452-116
Hydraulic guillotine shears STEINER type HTS 30/20 RMasch. No. 315 Year of construction 1982Cutting length 3050 mmCutting thickness 20 mmBack gauge 800 mm controlledMotor power approx. 30 kWNet connection 400 volts, 50 Hz- Back gauge with positioning control ELGO- Back gauge adjustment via ball screws- Safety light barrier SICK front as protection against interference- 3 pieces Material Support arms with ball rollers- Electric foot switch- Replacement knifeSpace requirement of the basic machine L x W x H 4650 x 2610 x 3200
Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15
Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open
Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil
Auction-ID: A1-45793-120
equipped with scales Auction-ID: A1-45793-50
Single column hydraulic press SCHULZ type SES 250Masch.Nr. 04.86.3511/3 Year of manufacture 1986Compressive force 25 ton. Retraction force 10 toProjection 360 mmTable surface 600 x 720 mmPlunger area 500 x 500 mmFailure opening in table 100 mmPin hole 40 mmPlunger stroke 400 mmInstallation height max. 600 mmTable height above floor 935 / 775 mmTank capacity hydraulics 380 litresDrive power 7.5 kWNet connection 380 volts, 50 Hz- Fixed stop adjustment in the press cylinder 180 mm- Light barrier
maximum number of results exceeded
please refine your search
300 € 
