hydraulic cylinder used for sale

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Year :1993

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca.3000, Length mm: 2800, Width mm: 2000, Total hight mm: 700, built-on roller conveyor: yes,

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972

Manufacturer: Scherenhubrollenbahn, Year: ca 2001, Length mm: 4800, Width mm: 710, Total hight mm: 260, Hand switch: yes, Safety strip: yes, Carriage: no, built-on roller conveyor: yes, FREE TEXT: Rollenteilung 80 40 Rolle, Year :ca 2001

Manufacturer: Istel, Type: Hebevorrichtung Motorisch, Lifting power kg: ca.200, Length mm: 1600, Width mm: 790, Lifting hight approx. mm: 1100, Total hight mm: 250, Hand switch: yes, Safety strip: no, Total power kW: 1,1, CE-Sign: no,

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer Sundstrand, hydraulic unit -Hydraulic pump: type TFP100/3.8 D CO 01 LAB F/40 -Motor: Dietz 1.5 kW 2850 rpm -Dimensions: 400/220/H165 mm -Weight: 15.5 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,

Hydraulic power unit with pressure accumulator

CONTROLS   PC controller BECKHOFF C 6140 PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 410 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 8 mm/s   working velocity max.: 80 mm/s   return velocity max.: 150 mm/s COUNTER RAM   nominal force: 120 to   stroke: 40 mm V-RING   nominal force: 250 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 820 mm   lower table (front-back): 1250 mm   upper table (left-right): 820 mm   upper table (front-back): 1250 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   s ...

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Danfoss, hydraulic motor -Type: OMP 50 151-0020 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 12x aggregate available -Price: per piece -Dimensions: 190/130/H125 mm -Weight: 5.9 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

Beyeler RH 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: manual Passage between uprights: 2630 mm Max stroke: 215 mm Max distance between table -- ram: 410 mm Depth of throat: 255 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Electric motor (power): 5,5 kW Length: 3300 mm Depth: 1550 mm Height: 2450 mm Weight: 7 ton

Haco HSL 4100 x 12 mm Cutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

LVD MVB 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3300 mm Strokes/min: 18 > 60 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 7,5 kW Weight: 6 ton

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

LVD PPS-TS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: Cadman Express Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 16 kW

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Parker, hydraulic pump -Type: 730-0080 000-064 -Drive shaft: Ø 22 x 35 mm - universally applicable -Hole: Ø 13 mm / Spacing 106 mm -Dimensions: 233/133/H135 mm -Weight: 13.1 kg

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.