hydraulic cylinder used for sale

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 325 014 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 2x pumps available -Price: per piece -Dimensions: 125/90/H120 mm -Weight: 3.3 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB6.2/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 6x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB4,5/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 5x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB4,5S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 2x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, gear pump -Manufacturer: Bucher, hydraulic pump, gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 7 pumps available -Price: per piece -Dimensions: 84/82/H100 mm -Weight: 2.0 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, drive motor, drive motor, gear pump, gear pump -Manufacturer:Parker, hydraulic pump gear pump -Type: 2BK7S9 -Flange/shaft: see photo, square 8 x 17 mm -Quantity: 1x pump available -Dimensions: 160/103/H100 mm -Weight: 2.4 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Pedro Roquet, Double hydraulic pump -Type: 1LS9 3DJ23FR 1L03DB24R -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 210/155/H120 mm -Weight: 5.2 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Hydraulic Air Pressure Intensifier ENERPAC AHB 46 03307C Max 368 BAR Dimensions: 550 x 280 x 230 mm

Hydraulic jack, hydraulic universal jack YALE JH-30 lifting capacity: 30 t stroke: 180 mm height lowered: 300 mm used, tested ! Dimensions: 300 x 170 x 210 mm

pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Key data: 3000 mm, 6 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

Refer to code 1174 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7553 Specifications: - dimensions of the hobs 2550x1100mm - number of batches 1 - electrically heated shelf - ground clearance 360mm - Number of cylinders 4 - cylinder diameter 80mm - emergency disconnection of the machine - total power 15.5kW - 1.5kW pump motor - dimensions length/width/height 2900x1300x2100mm - weight about 3000kg ADVANTAGES – made in Germany – electrically heated shelves – golden shelves – unpainted – very good condition – used press Net price: 27900 PLN Net price: 6488 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

pressure: 120 t stroke: 400 mm dayligth: 900 mm feed down: 5,8 mm/sec feed up: 9,5 mm/sec Heads: 200x125 mm total power requirement: 6 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1900x1000x2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm Frame Width: 450 mm column daylight: 1300 mm cylinder diameter: 170 mm work height max.: 900 mm Front light range: 1400 mm Lateral light range: 450 mm total power requirement: 7,5 kW weight of the machine ca.: 2600 kg dimensions of the machine ca.: 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - / Contact us at -

Refer to code 1173 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

pressure: 160 t stroke: 400 mm dayligth: 900 mm Heads: 225x135 mm feed down: 6,2 mm/sec feed up: 9,8 mm/sec total power requirement: 6 kW weight of the machine ca.: 1.300 kg dimensions of the machine ca.: 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 400 mm total power requirement: 4,0 kW : 7,4 mm/s : 11,5 mm/s Heads: 160x95 mm weight of the machine ca.: 725 kg dimensions of the machine ca.: 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1184 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca 2000, Length mm: 1.400, Width mm: 1.200, Total hight mm: 770, built-on roller conveyor: yes, FREE TEXT: 2 Stck vorhanden,

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013