hydraulic cnc press used for sale

Hydraulic guillotine shears FASTI type 509 - 25/4Masch. No. 5418 Year of construction 1991Cutting length 2535 mmCutting thickness 4 mmBack gauge 5-1000 mm (controlled)Cutting angle adjustableHydraulic pressure max. 290 barMotor power 7.5 kWNeching connection 400 volts, 50 Hz- Back gauge with positioning control ELGO ELECTRIC Type 85- Sheet metal holding device under the back gauge- Manual cutting gap adjustment with dial gauge display on the right and left- Stepless cutting length adjustment- Hydraulic

Key data: 4040 mm, 4 mm

Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet hold-up Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 7500 kg

Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cut edge lighting New knives

Key data: 3190 mm, 6 mm

Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm

Hydraulic filter changer - FBM Falzoni brand - Size: Ø 160 mm - With 10 hp (7.5 kW) hydraulic group

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg

Hydraulic guillotine: - 125 TN - Cutting size: 1600 mm wide x 1400 mm high - Hydraulic unit with engine: 30 hp (22 kW)

Soenen CCH 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge Electric motor (power): 15 HP Length: 3300 mm Depth: 2000 mm Height: 2000 mm Weight: 9,5 ton

tank capacity: 200 l engine output: 5,5 5,5 current capacity: 380 V / 50 Hz total power requirement: 6 kW weight of the machine ca.: 800 Kg range L-W-H: 1,3 x 0,7 x 1,0 m Hydraulic center winders for knitted fabrics, adjustable, controllable tension, Menzel connection system. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. hydr. Guillotine shears, Fabr. LVD, Type MVN 25 / 4, built in 1984 Capacity 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table - Lift table

Hoort bij Lijn -gt; P.14d 15917

Offer 25328 Specifications: - Max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48 ° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - Front angle stop approx. 1100 mm - 2 pcs. front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton

Offer 25376 Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 13 mm - Hydr. Cutting angle adjustment - Number of hold-downs 13 pcs - Front angle stop - 4 pieces of front support arms -Mot. Positioning-controlled backgauge 10 - 1000 mm - Cut line illumination - Rear space protection with side grilles + light barrier - E - Footswitch - Drive 400 V / 20 kW - Space requirement approx. W 4350 x H 2100 x D 2200 mm - Weight approx. 8.5 t

1 set of hydraulic boars, Fabr. YALE Type HPS-2/ 2A, as good as new 2 stages; Operating pressure max. 700 bar

suitable for three-point mounting, 85 kg load capacity, Working width: 1

Suitable for John Deere 4400 and 4500 telehandlers, 13 teeth with 20.5 mm shaft diameter

NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators

feed pressure: bar liter capacity: l power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

Safan 2500 x 3 mm Cutting length: 2500 mm Max sheet thickness st 45: 3 mm Max sheet thickness inox: 2 mm

Hydraulic cylinder, double-acting, 210bar, stroke 1500mm, D80mm, NS41191534.., Parker, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Parker double-acting hydraulic cylinder, Type: NS41191534/DDHMDRN24M-C1100, Overall dimensions: 1740x130x200mm, approx. 100kg, Stroke 1500mm, Piston D 80mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential d ...

Key data: 3080 mm, 6 mm

max. sheet thickness steel (450N/mm²) 6.5 mm max. cutting width 3080 mm Machine weight 5600 kg Very good, ready-to-use condition

Darley 3100 x 8 mm Cutting length: 3100 mm Max sheet thickness st 45: 8 mm

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...

Offer 25493 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...

Hydraulic power unit REXROTH consisting of: Hydraulic tank 250 Ltr. Electric motor 15 kW REXROTH Internal Gear Pump HYDAC Accumulator SCHMÖLE Heat Exchangers Temperature monitoring Hydraulic filter Return filter

sheet width: 3,5 mm cutting width: 3050 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

The VISCOTHERM Hydraulic Power Unit B/C 11–22 Z/HP is a powerful, robust pump unit for the reliable supply of the ROTODIFF hydraulic motor in decanter centrifuges. With an 11 kW electric motor, a gear pump (22 l/min at 270 bar) and integrated proportional control, it enables infinitely variable adjustment of the screw speed during operation. The 85-litre tank, an efficient oil/water cooler and extensive monitoring and protection components ensure safe and long-lasting operation – even under demanding industrial conditions.

Key data: 3000 mm, 13 mm, 1000 mm

Description of the used machine • Angle stop • Support arms • Controlled backgauge 1000mm Hfoboh Dm H Ioqxim Iqjb • Swing cut shears • Light barrier for rear space protection • Secure finger protection thanks to grilles • Foot switch with emergency stop switch and safety line • Rotatable knives • Touchscreen control Used, well-preserved guillotine shears Durma SBT 3013 Swing-cut shear with sheet metal fixation via hydraulic hold-down holders. Make: Durmazlar Model No.: SBT 3013 Year of Make: 2009 Technical data: Sheet width 3100 mm Max. sheet thickness 13 mm (400 N/mm2) Connected load 30.0 KW Cutting angle° 1.45° Weight approx. 8000 KG Table width 600 mm Table height 845 mm Number of hold-downs 16 Space requirement (LxWxH) approx. L 4.25 x W 3.85 (plus VAT) support arms) x H 2.2 m Adjustable back gauge 1000 mm Year of construction 2009 ...

A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.

Socad 300 x 8 mm (fixed angle) Capacity : 300 x 8 mm Fixed angle -- variable angle: fixed Electric motor (power): 7,5 HP Length : 1200 mm Depht : 900 mm Height: 1500 mm

Type: 230 Maximale buighoek: 180° Max worklength: 2040 mm Max tickness: 1,5 mm Distance between clampblock -- ram: 100 mm Eletric motor (power): 0,75 kW Weight: 1000 kg

Comaca 225 x 3 mm (fixed angle) Capacity : 225 x 3 mm Strokes/min: 80 str/min Fixed angle -- variable angle: fixed angled Workspace: 1050 x 700 mm Electric motor (power): 1,5 kW

Hydraulic clamp couple for chair assembly CAMAM mod. SIPM - CE - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

This LVD HST 25/6 hydraulic shearing machine was manufactured in 1993. It is a robust and reliable piece of equipment, ideal for shearing applications. Consider the opportunity to buy this LVD HST 25/6 hydraulic shearing machine. Contact us for more information.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information.

This KNUTH KHT 4113 was manufactured in 2008. A robust hydraulic shearing machine, it features a cutting length of 4100 mm and thickness capacity of 13 mm. Equipped with a 30 kW motor and a substantial clamp force of 62 tons, it ensures precise and efficient operations. Machine weight is 16,300 kg. CE Certified by TÜV Rheinland. If you are looking to get high quality shearing capabilities consider the KNUTH KHT 4113 machine we have for sale. Contact us for more information.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information.

This CHENDE CJ480M3V was manufactured in 2007. A hydraulic injection moulding machine featuring a tie bar distance of 800 x 770 mm and an opening stroke of 750 mm. It includes 2 core valves, 3 air valves, and an EU 12 for robot connection. Consider the CHENDE CJ480M3V machine we have for sale. Contact us for more information.

This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information.

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.