126,720 used machines on RESALE, but how to find them? Machine Search
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39 Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 20C Baujahr / Year 2007 - Serial-No. 10045880-115 Schneidetisch / Cuttig Surface 900 x 430mm Armweite / Travelling Head Size 370mm Schnittleistung / Power max. 20T / 196kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 630kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Includes: transport box 1230x810x1030mm, various accessories.
Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm
Hydraulikpresse / Hydraulic Press Tränklein ZP Serial-No. 24088 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets ...
pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Equipment: - Controlled axles: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic, hydraulic crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t
HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. A price included in the offer applies to one machine. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm
Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
