hydraulic bending machine used for sale

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.

Manufacturer: Durma Model: HRB-4 2010 Year of Manufacture: 2012 Type of Machine : 4-roll bending machine Machine Weight: 4,450 kg Condition: Unused - acquired May 2023, never operated, stored in warehouse Technical Specifications: - Bending Length: 2,050 mm - Max. Bending Thickness (mild steel): 8 mm - Max. Bending Capacity: 10 mm - Top Roller Diameter: 210 mm - Lower Roller Diameter: 190 mm - Side Roller Diameter: 180 mm - Min. Rolling Diameter: 30 mm - Motor Power: 11 kW - Oil Tank Capacity: 160 litres - Machine Dimensions (L x W x H): 3,830 x 1,160 x 1,180 mm Find more here - / Contact us at -

Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004

Key data: 100 mm, 160 mm, 115 mm

Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

6 axis Type of controll tasc 6000 Power (ton) 320 Length ( mm) 4420 Depth groove ( mm) 420 Passage between the couloumn (mm) 3680

pressure: 80.0 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10.0 kW motor: 400 Volt 50 Hz oil volume: 120 l weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) Bending punch .. degree: 60° / bending radius: 5.0 mm Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions The data ...

Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

wire diameter 10-16 mm feed legth 100-250 mm pitch 5x dia. output pieces/min 25-50

dia. range 5 mm width of band 40 mm feeding length 500 mm stokes per minute 200 1/min

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

3D - CNC wire diameter 5-12 mm feeding length unlimited

machine ready for transport and to be assessed on viewing day PLC program problem Auction-ID: A1-44905-143

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-111

Horizontal and vertical Horizontal and Vertical Axis Ø 85 mm Number of rolls 3 Stroke X-axis 200 mm Moment of resistance 37 CM³ Capacity Down 80 x 15 x R = 800 mm Tube capacity 76 x 3.6 x R = 600 Ø x mm Capacity solid 45 x 45 x R = 600 mm T-profile capacity 8-0 x 8-0 x R = 800 mm Working speed 0 - 7000 mm/min. Auction-ID: A1-44905-182

Max. bending capacity: 300 kN (30t) Cylinder stroke: 250 mm Pressure adjustable from 0-300 kN Tool height: 200 mm Bending capacity:140 x 20 mm for V125; 200 x 18 (19) mm at V200 straightening capacity Wy200 at straightening block spacing 1,000 mm Length stop with several stop flaps Automatic and manual mode possible Weight: approx. 700 kg

Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8 to 3 -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3 (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 € : 630.3 € : 2530 mm : 6 mm : 6 mm : 4 mm : 190 mm : 5.5 kW : 4250 mm : 1200 mm : 1150 mm : 3750 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - / Contact us at -

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 € : 137.03 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 2900 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 € : 676.14 € : 3030 mm : 6 mm : 6 mm : 4 mm : 220 mm : 5.5 kW : 4750 mm : 1200 mm : 1150 mm : 4920 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL