hydraulic bending machine used for sale

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

We sell new bagel machines

Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...

SHIKI Model PC 30, year of construction 1980, 1x letterpress (2 colors); lamination unit; punching unit; Longitudinal section, 2 hot foil plates, in good condition, immediately available

Evaporator Güntner, air cooler with two fans 500mm, 8 mm fins and defrost heater The atomizers are for TK as well as for Plus Grade Refrigerant Freon, all types. Outputs from 15 to 22kW at minus 25°C evaporation, or 25 to 38kW at minus 10°C evaporation. Liter capacity 33.9 liters, 27 liters, 20.7 liters, all with two fans Price on request.

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control

for cutting bread

water cutter

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Vial blister machine Manufacturer: Uhlmann Model No.: UPS4 Year of Make: 2000 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production Capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm Coil diameter of the lidding film: max. 300 mm Min/Max Thermoforming Film Thickness: 0.15/0.5mm Width of the sheath material: • Thermoforming film: 145 to 300 m ...

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.