hydraulic bending machine used for sale

Diosna Wendelkneter Type: W120 Carousel 4 stainless steel boilers with lifting tipper with control cabinet Carousel Painted

MAX DIAMETER 750,MAX MODULE 10

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

Machine light, machine lamp, workspace light, recessed light -Manufacturer: SBF, recessed light 24V / 7W unused -Type: P002800 -Connection: LED plug -Quantity: 24x lights available -Price per piece -Dimension: 730/45/H37 mm -Weight: 0.7 kg/piece

Machine vice, stable vice, drill press vice -Machine vice: clamping jaws 150 x 50 mm -Clamping depth: 143 mm -Groove: 104 x 17 mm -Dimensions: 455/170/H125mm -Weight: 25 kg

Eillert C25 H Potato rumbler Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

Machine reamers, reamer, reaming tool, fitting knife cutting set -Machine reamer: Shell reamer with holder -Diameter: Ø 26 mm -Shaft diameter: Ø 16 mm -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Kronen S021 vegetable cutting machine Serial: 021-016 2014 Stainless, The vegetable cutting machine S021 is perfectly suited for cutting decorative spirals of vegetables (e.g. carrots, potatoes, pumpkins, radishes, celeriac, beetroots, zucchinis, etc.) very quickly and simply. By means of variable tools a multitude of spiral thicknesses (e.g. 2 x 2 mm, 2 x 8 mm, 2 x 10 mm - other versions on request) can be produced with a max. product length of 250 mm."

welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg

12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Bljalbers BLJ150 pot sealer Serial: 10150002 2010, Stainless pot sealer, seal up to 6 pots at once, adjustable temp control, previously used for 100mm diameter pots, mobile frame, 1Ph

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

Sinmag conical round knitter with flour spreader - with flour spreader - Cones and gutters with Teflon coating - with stainless steel base - with emergency switch - on swivel castors with parking brake

Paper drilling machine Nagel Citoborma 280 AB

Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Stephan Kitchen Cutter Universal Model FD 622/4D -Stephan Kutter -Aluminium boiler -Boiler with tilting function -2 speeds -with 2 mixing tools -with 1 knife mixing tool

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.

Scattering unit Scattering BM Tec - with 2 satchels (on both sides) - Running tables individually removable - completely in stainless steel - can be driven on castors - 4 seed containers - with rack trolley for storing the running tables

Spiral dough kneading machine Kemper SP 125 L used bakery machines, kneading machine spiral kneader with solid stainless steel boiler from Kemper robust and stable, spiral kneader Kemper SP 125 L for the production of high-quality Teigen.Es can roll dough, bread dough, pastry dough and similar doughs.Kemper spiral kneaders work on 3 zones kneading principle spiral guide rod so the doughs become woolly, processing-friendly with maximum oxygen input in the dough. Kemper Spiral Kneader - Stainless steel boiler - Stainless steel spiral - 2 x timers automatic - 2 x speeds slow and fast - with flour dust cover - for 125 kg of flour or 200 kg of dough Machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 32 mm -Guide carriage: 90 mm movable -Dimensions: 400/235/H200 mm -Weight: 33 kg