129,479 used machines on RESALE, but how to find them? Machine Search
Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45451-1174
CONTROLS PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock quick die change system: no feedstock transport direction: left to right SLIDE total force (nominal): 400 to stroke: 230 mm stroke rate (max.): 35 /min SLIDE (HYDR. PRESS) approximation velocity max.: 120 mm/s working velocity min.: 5 mm/s working velocity max.: 50 mm/s return velocity max.: 135 mm/s COUNTER RAM nominal force: 100 to stroke: 40 mm V-RING nominal force: 200 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 1050 mm lower table (front-back): 800 mm upper table (left-right): 800 mm upper table (front-back): 800 mm shut height max.: 410 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 350 mm sheet thickness max.: 16 mm feeding step min.: 1 mm fee ...
Make: Samson Type: Hydraulic Toe Jack Model: WS25-6D Serial number: 241194A Technical data: - Maximum load (on claw/toe): approx. 10 t - Maximum load (head): approx. 25 t - Type: Mechanical / hydraulic lifting jack Equipment: - Integrated lifting toe (low profile) - Top lifting head - Carrying handle Application: - Lifting heavy machinery - Industrial maintenance and installation works Condition: Used Auction-ID: A7-45993-39
DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4
Offer 26110 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 230 V / 1.25 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg
Offer 26106 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg
Equipped with: demolition hammer, for crane of 25-30 tons, length hammer without axe 2.2m, no hoses or head plate available. Auction-ID: A1-40137-283
Make: Hydra Lite Type: Hydraulic Bottle Jack Model: PS 1220 Manufactured in: England Technical data: - Type: Hydraulic bottle jack - Rated capacity: approx. 10–12 t (based on model marking) Equipment: - Top lifting piston - Integrated carry handle - Compact heavy-duty base Application: - Lifting machinery and heavy loads - Maintenance and workshop use Condition: Used Auction-ID: A7-45993-40
Auction-ID: A1-46501-2085
Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17
A stationary industrial air compressor with rotary vanes (rotary vane technology), suitable for continuous use in workshops and production environments. Features: - Type: Rotary vane air compressor - Power: 15 kW - Working pressure: approx. 8 bar - Air output: approx. 2.21 m³/min (± 78 CFM) - Drive: Direct drive, fixed speed - Power supply: 400V - Noise level: approx. 70 dB(A) - Version: Closed, sound-insulated cabinet Applications: - Workshops and garages - Industrial production and assembly - Pneumatic tools and installations - Continuous compressed air supply in technical environments Features: - Constant air supply with stable pressure - Low vibration due to rotary vane principle - Suitable for long-term and continuous use - Relatively easy maintenance due to mechanical construction Auction-ID: A1-40137-210
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-195
Chisel diameter: 140 mm; Hose diameter: 1 inch; Working pressure: 200–240 bar; Oil flow: 160–200 L/min; Crusher weight: 1,875 kg; Stroke frequency 320–650 bpm; Unused Auction-ID: A1-40137-259
Equipped with: reversing camera, work lights, lifting device, load sensing, 2x double-acting hydraulic valves, air pressure change system, hydraulic suction arm, DAF 6 Cylinder Auction-ID: A1-40137-21
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-116
Type: Manual Hydraulic Hand Pump Brand: Holmatro Application: Hydraulic pressure generation for testing, lifting or rescue tools Equipment: - Manual lever-operated pump - Integrated hydraulic cylinder - Pressure gauge (0–1000 bar scale) - Hydraulic outlet with coupling - Oil filling cap - Base mounting brackets Technical Data: Operating pressure: up to approx. 1000 bar (based on gauge) Drive: Manual lever Medium: Hydraulic oil Condition: Used Auction-ID: A7-45993-73
Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. excavator bucket, unused machine Auction-ID: A1-40418-12
Holzmann hydraulic scissor lift table, SHT310 with Holzmann top frame, SHT310PAR Versatile scissor lift table: as an additional workstation (adjustable/ergonomic working height for the respective work) as a filing aid for machine loading with the optionally available plate attachment frame SHT310PAR up to 310 kg load Equipped with: two foot pedals, one for hydraulic lifting and one for lowering the work table to an ergonomic and individual working height Two swivelling castors for easy manoeuvring, with parking brakes ensures additional safe positioning a large work surface of 1580 x 900 mm as well as a minimum table height of 470 mm and maximum table height of 1075 mm round off the product Holzmann Top Top Frame, SHT310PAR Panel top frame suitable for our SHT310 for easy handling of larger panels Track rollers on the frame allow for easy loading and unloading of plates Swivel mechani ...
Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. bucket and spoon board, unused machine Auction-ID: A1-40418-310
Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-237
Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.
3x Gressel Grepos-5x for true 5-axis complete/simultaneous machining with plate. 4-40 kn Auction-ID: A1-46607-15
Wooden shelf with contents, Contents: large assortment of hydraulic fittings: nipples in different sizes, plug-in connections, hydraulic blocks etc.; see photos for more details Dimensions: 940x530x1900mm Auction-ID: A7-46619-289
Hydraulic Spare Parts – Assorted Lot General data: Equipment type: Hydraulic components and spare parts Condition: Used / partly new (mixed lot) Included items: Hydraulic directional and pressure control valves Solenoid valves (electro-hydraulic) with coil housings and manual overrides Manifold-mounted valve blocks Electrical coil connectors Brands: Likely Bosch Rexroth and other European OEM manufacturers Highlighted component: New spare valve (boxed) Label: Dr. Begr. Ventil ECG-06-F10-TG-GF/60” Type: NG6 / CETOP 3 hydraulic valve Additional equipment: Hydraulic pump / motor unit (blue housing, likely Rexroth) Description: Assorted lot of hydraulic spare parts including control valves, solenoid valves, manifold blocks, and pump units. Suitable for maintenance, repair, and industrial applications. Includes both used and new components, ideal for worksho ...
Rebuilt in 1993, Press force: 200 t, Table size : 1250 x 1000 mm, large removal of clamping surface to ram: 900 mm, Plunger stroke: 500 mm, Kickback force: 29000 kg, Hold-down device large stroke: 250 mm, Ejector: 250 mm away, Power requirement: 25 kw, Speed: 960 rpm, Minimum installation height: 400 mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-220
Multifunction Hydrafacial system Hydraface Plus 12-in-1” designed for professional aesthetic treatments. Combines multiple technologies including hydrodermabrasion, vacuum, ultrasonic, radiofrequency, BIO microcurrent, PDT light therapy and high frequency. Suitable for deep facial cleansing, hydration, skin rejuvenation, acne treatment and anti-aging procedures. Includes multiple handpieces and accessories as shown in the pictures. Auction-ID: A1-46551-2
Machine No: ZE 400.16.1.11.U, rebuilt in 1993, Press force: 400t, Table size: 1600x1300 mm, Run-up time 90 ms. The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-230
Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge Auction-ID: A1-46480-2125
Hydraulic quick coupler for excavator, suitable for quick and safe change of attachments such as excavator buckets. This type of quick coupler is mounted on the arm of the machine and allows for a manual pin change of attachment, which significantly increases efficiency. Auction-ID: A3-43529-13016
For ITR hydraulic hammer; Auction-ID: A7-46458-47
REIS TUS 70 OK-70 – 4-Column Hydraulic Spotting Press General data: Manufacturer: Reis Model: TUS 70 OK-70 Machine number: 01.094.00 Year of manufacture: 1991 Machine type: 4-column spotting press (hydraulic) Weight: approx. 8000 kg Technical details: Pressing force: 700 kN Maximum pressure: 220 bar Equipment: Hydraulic swing-out upper table Movable lower table Control system: Reis PE-NC2511 Description: Industrial 4-column hydraulic spotting press REIS TUS 70 OK-70 designed for die spotting, tool adjustment, and mold alignment operations. The machine features a robust construction, movable lower table, and hydraulic swing-out upper table, enabling precise positioning and efficient setup processes in toolmaking and production environments. Auction-ID: A7-46498-83
Technical details Manufacturer: Genkinger (Hermann Genkinger KG) Model: AE 3/6 Year: 1976 Type: Hydraulic lift table cart Operation: Manual hydraulic system (foot pump) Load capacity: 300 kg Own weight: Approx. 100 kg Configuration: Scissor lift mechanism Platform: Steel loading platform Mobility: Industrial castor wheels with push handle Application: Ergonomic lifting and transport of materials in workshop and production environments Dimensions and weight (approx.) Length: 800 mm Width: 600 mm Height: 900 mm Weight: 100 kg Auction-ID: A7-46498-123
With new spare parts Auction-ID: A7-46458-44
MÜLLER CT16.4.1 – Hydraulic Press General data: Manufacturer: Müller Model: CT16.4.1 Machine number: 221 094 A110 Year of manufacture: 1991 Machine type: Hydraulic press Technical details: Pressing force: 16 tons Description: Compact hydraulic press MÜLLER CT16.4.1 designed for pressing, forming, and assembly operations. Suitable for workshop and industrial applications requiring controlled pressing force and reliable operation. Auction-ID: A7-46498-107
Type: SE201/125.1.2, Printing capacity: approx. 200t, Table surface approx. 1600x1300 mm, Stroke max. approx. 600mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-240
Technical details Type: Industrial hydraulic cylinders (heavy-duty) Configuration: Double-acting cylinders with flanged mounting Quantity: Approx. 3–5 units Design features: - Multi-bolt end caps - Chrome-plated piston rods - Side hydraulic ports (supply/return) Mounting: Flanged ends for machine integration Estimated specifications: - Bore: Approx. 120–200 mm - Stroke: Approx. 200–400 mm Application: Presses, foundry equipment, clamping and forming systems Condition: Used with external oxidation and oil residue; one piston rod appears smooth/polished, others not fully visible Dimensions and weight (approx.) Length: 800 mm Width: 400 mm Height: 300 mm Weight: 100 kg per unit Auction-ID: A7-46498-134
HYDROSTATIK HFM610 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM610 Machine number: 6562 Year of manufacture: 1988 Machine type: Hydraulic press Technical details: Pressing force: 10 tons Stroke: 400 mm Operating pressure: 200 bar Drive power: 5.5 kW Description: Hydraulic press HYDROSTATIK HFM610 designed for pressing, forming, and assembly operations. The machine offers controlled force application and a long stroke, making it suitable for workshop and industrial applications. Auction-ID: A7-46498-117
2x Allmatic DUOPLUS Accessories: 4x jaws Up to 40 nm Auction-ID: A1-46607-23
MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and is suitable for workshop and industrial applications requiring controlled pressing force. MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed fo ...
Technical details Manufacturer: Gebrüder Röcher Maschinenbau (Germany) Model: REP 20.02 N Year: 1982 Type: Hydraulic press (vertical) Press force: 200 kN (approx. 20 tons) Stroke: 450 mm Working speed: Approx. 31 mm/s Approach speed: Approx. 276 mm/s Return speed: Approx. 335 mm/s Motor power: 7.5 kW Voltage: 380 V / 50 Hz Fuse rating: 35 A Control: Manual control station (pendant) with emergency stop System: Hydraulic drive with integrated control cabinet Application: Forming, pressing, punching, and assembly operations Dimensions and weight (approx.) Length: 2000 mm Width: 1200 mm Height: 2500 mm Weight: 1500 kg Auction-ID: A7-46498-165
For ITR hydraulic hammer; Auction-ID: A7-46458-45
HYDROSTATIK HFM406 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM406 Machine number: 4589 Year of manufacture: 1979 Conversion: Updated according to UVV 11.064 (06/1992) Machine type: Hydraulic press Technical details: Pressing force: 6 tons Stroke: 300 mm Operating pressure: 120 bar Power consumption: 3.0 kW Voltage: 380 V Description: Hydraulic press HYDROSTATIK HFM406 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and offers reliable performance for workshop and industrial applications. Auction-ID: A7-46498-119
For ITR hydraulic hammer; Auction-ID: A7-46458-46
pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary
pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
maximum number of results exceeded
please refine your search
1.000 € 
