hydr used for sale

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 200 mm -Type: LK 200 A72-2163-132 -Thread: M20 -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit -Hydraulic tank: Hydraulic tank for hydraulic unit -Hydraulic tank: with level and temperature indicator -Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6 -Individual components: see photos -Dimensions: 490/400/H515 mm -Weight: 25 kg.

Valve block, hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Control block: Hydraulic control block -Valves: 23 P1 M/10 D4 P4-S1/20H -Individual components: see photos -Shipping/Price: complete -Dimensions: 270/270/H315 mm -Weight: 27 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Lippold, hydraulic unit -Pressure: 100 bar -Flow rate: 3 l/min -Motor: AEG 0.37 kW / 1360 rpm -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 350/250/H445 mm -Weight: 22.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit type HY 1359 -Engine: 2.2 kW -Pressure: up to 105 bar -Flow rate: 10.5 l/min -Hydraulic tank: with filter and level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 650/510/H740 mm -Weight: 105 kg

Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Duplomatic, hydraulic unit type CTR 2 -Hydraulic pump: Racine Vickers PVQ PSSO 06ER 20 -Motor: 0.75 kW -Pressure: up to 20 bar -Flow rate: 9 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 550/245/H590 mm -Weight: 62 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Herion, hydraulic unit type HY 1359 -Motor: VEM 3.0 kW -Pressure: up to 15 bar -Flow rate: 12 l/min -Valves: Herion S 6 VH 10G009 / MU2S6 HGZ -Hydraulic tank: with filter and temperature/level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 735/445/H725 mm -Weight: 144 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting stroke 100 mm -Type designation: YS-23/100 -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 150/85/H195 mm -Weight: 7 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 20/50 -Stamp diameter: 65 mm -Lifting capacity: 20 t -Number: 2x cylinders available -Price: per piece -Dimensions: 140/100/H205 mm -Weight: 6.1 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H195 mm -Weight: 8.9 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Quantity: 1x hand pump available -Dimensions: 760/230/H320 mm -Weight: 10 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: Baumann, double-acting hydraulic cylinder from electric forklift EVS 25/14 -Stroke: 900 mm -Piston rod: Ø 40 mm -Hole diameter: 25 mm / hole spacing 1170 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 1235/195/110 mm -Weight: 27.8 kg/piece

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit -Hydraulic pump 1: Motor ABB 3 kW 150 bar -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: FAG, single-acting light alloy cylinder with spring return, stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm -Weight: 12 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder: Short-stroke heavy-duty cylinder with hand hydraulic pump -Cylinder: stroke 10 mm -Piston rod: Ø 70 mm -Dimensions: cylinder 130 x 42 mm -Transport dimensions: 500/210/H140 mm -Weight: 6.9 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: for hydraulic power chuck of CNC lathe Swedturn, type ST12 CNC 300 -Aggregate: AR-7587 -Hydraulic pump: Manufacturer Brown & Sharpe Type PVV-06-11A1 Double A -Engine: 1.5 kW / 1440 rpm -Pressure: up to 30 bar -Flow rate: 15 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 540/840/H865 mm -Weight: 215 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, swivel cylinders, tilt cylinders -Manufacturer: Still, hydraulic cylinder, tilting cylinder, double-acting, stroke 50 mm -Type: 654662 -Piston rod: Ø 22 mm -Hole: Ø 17 mm -Number: 2 cylinders available - Price: per piece -Dimensions: 385/68/H85 mm -Weight: 4.1 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Kleinschmidt, double-acting hydraulic cylinder stroke 25 mm -Type: KF22F-100 -Piston: Ø 100 mm -Piston rod: Ø 56 mm -Piston rod mount: M45x1 mm -Total length extended: 355 mm -Pressure range: max. 210 bar -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 243 x 330 mm -Weight: 36 kg/piece

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder, tie rod cylinder, tilting cylinder -Hydraulic cylinder: double-acting, stroke 175 mm -Type: unfortunately without a type designation -Piston rod: Ø 30 mm -Hole: Ø 20/16 mm / Retracted distance 325 mm -Dimensions: 365/70/H130 mm -Weight: 5.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 40 mm -Stroke: 200 mm -Hole: Ø50 mm -Pitch spacing: retracted 725 mm -Dimensions: 850/130/187 mm -Weight: 32.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 50 mm -Stroke: 220 mm -Hole: Ø50 mm -Pitch spacing: retracted 555 mm -Dimensions: 675/140/196 mm -Weight: 37.3 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and control unit -Hydraulic pump: Pressure up to 100 bar -Flow rate: 6 l/min -Motor: 3 kW / 1410 rpm -Hydraulic tank/filter/valves: see pictures -Key switch: CNC Electric COB-62C -Dimensions: 470/450/H685 mm -Weight: 84 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

Hydraulic power unit, hydraulic pump, hydraulic pump -Max pressure: 70 bar -Drive: 55 kW 1470 rpm -Liter output: 268 l/min -first pump type: KP42/82 F10JV00 -Second pump type: KP42/100 C1ZXZVG -Hydraulic tank: -Dimensions: 2200/200/H1400 mm -Weight: approx. 3500 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1100 mm -Piston rod mounting: Ø 53 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1650/160/H120 mm -Number: 2 cylinders available Price: per piece -Weight: 225 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Quantity: 1 piece still available -Piston diameter: approx. 125 mm -Piston rod: Ø 85 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1525 mm -Piston rod mounting: Ø 62 mm -Cylinder mounting: Ø 70 mm -Usable: universal -Dimensions: 1650/220/H150 mm -Weight: 140 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 65 mm -Piston rod: Ø 45 mm -Stroke: 600 mm -Piston rod mounting: M30 x 1.5 mm - universally applicable: can be used -Quantity: 1 cylinder available Price: per piece -Dimensions: 110/1430 mm -Weight: 30 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 38 mm -Piston rod: 16 mm -Stroke: 500 mm -Total length when retracted: 710 mm -Total length extended: 1170 mm -Receiver: Piston rod thread Price: per piece -Quantity: 4x Available -Dimensions: 700/80/H80 mm -Weight: 4.3 kg

CONTROLS   PLC SIEMENS SIMATIC PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 630 to PRESS TABLE   table surface (left-right): 2500 mm   table surface (front-back): 1300 mm DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2450 mm   cushion plate surface (front-back): 1250 mm

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 € : 3647.7 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0.5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-applied brake, multi-disc spring-applied brake -Manufacturer: Stromag, hydraulic disc spring-applied brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 2 brakes available -Price: per piece -Dimensions: 220/190 mm -Weight: 16 kg/piece

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Offer 26031 Technical data: - Cutting length 3080 mm - Cutting thickness 13 mm - Cutting angle controlled 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Controlled backgauge up to 750 mm - Front angle stop + support arms 1000 mm - Control CYBELEC DNC 10 when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge - Rear space protection with light barrier - Drive 400 V / 18.5 kW - Footswitch - Space requirement approx. W 3850 x H 1750 x D 1800 mm - Weight approx. 10500 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Guillotine shears Manufacturer: LVD Type: MVSB 62/8 Year of Make: 1993 Max. working length: 6,200 mm Sheet thickness: 8 mm Weight approx.: 13.000 kg

A hydraulic press brake Steiner is available. Power: 30kW, max. pressing force: 300Mp, passage width: 2550mm, max. stroke: 240mm. Machine dimensions X/Y/Z: approx. 2700mm/2350mm/3450mm, weight: approx. 21000kg. An on-site inspection is possible.

Offer 26401 Technical data: - Operation via handheld remote control with cable - Load capacity 4000 kg - Platform size 2500 x 820 mm - min. Lift table height 230 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 40 / 35 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 230 mm - Weight approx. 360 kg

Offer 26109 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg