hydr used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: 0 530 314 001 -Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

KTC mechanical shear (guillotine) for cutting plastic sheet up to 6 mm thick and 1440 mm useful width. Equipped with a 7.5 HP (5.5 kW) geared motor, it offers precise and repetitive cuts for plastics transformation processes. Ideal for extrusion or recycling lines. Robust design and reliable operation.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: unfortunately without type designation -Piston rod: Ø 22 mm / M18 -Mountings: Ø 46 mm -Dimensions: 287/75/H92 mm -Weight: 4.7 kg

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

Offer 25199 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs -Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination - Rear space protection with light barrier

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

LVD HST 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 7 -> 35 str / min Adjustable cutting device: 0,05 > 0,8 Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 50 mm -Piston rod: Ø 40 mm / M24 -Dimensions: Ø 55 x 335 mm -Weight: 3.6 kg

Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 205 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 120 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm -Hole: Ø 20 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 60 x 300 mm -Weight: 4.0 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm -Holes: Ø 10 mm / Distance: retracted 220 mm -Dimensions: Ø 35 x 248 mm -Weight: 1.3 kg

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

Hydraulic hub motor Bosch Rexroth MCR5H470ZZ33B4M2WL12P1 Type: MCR5H470ZZ33B4M2WL12P1 Weight - 44 Availability: 2pcs price per piece Tags: MNR:R921811684 SN:2084083 FD:13W51

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 110 mm -Type: unfortunately without type designation -Piston rod: Ø 18 mm -Hole: Ø 13/16 mm / Distance: retracted 470 mm -Dimensions: Ø 65 x 500 mm -Weight: 5.1 kg

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

Stock number: D830, Hydraulic lifter,, Silverson model E., Manually controlled., Stroke 1000 mm.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 75 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Holes: Ø mm / Distance: retracted 340 mm -Dimensions: 400/90/H130 mm -Weight: 9.8 kg

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

Hydraulic filter suitable for JONES - SHIPMAN, Model 1300, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 63 mm -Type: unfortunately without type designation -Piston rod: Ø 28 mm -Holes: Ø 40 mm / Distance: retracted 320 mm -Dimensions: Ø 88 x 400 mm -Weight: 8.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic filter suitable for JONES - SHIPMAN, Model 540, Information about technical data are not binding., Machine available subject to prior sale.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 185 mm -Piston rod: Ø 20 mm / M20 -Dimensions: 475/110/H65 mm -Weight: 4.5 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Hydraulic filter suitable for JONES - SHIPMAN, Model 540X, Model 1400X, Information about technical data are not binding., Machine available subject to prior sale.

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Hydraulic Gripper

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer Sundstrand, hydraulic unit -Hydraulic pump: type TFP100/3.8 D CO 01 LAB F/40 -Motor: Dietz 1.5 kW 2850 rpm -Dimensions: 400/220/H165 mm -Weight: 15.5 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Danfoss, hydraulic motor -Type: OMP 50 151-0020 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 12x aggregate available -Price: per piece -Dimensions: 190/130/H125 mm -Weight: 5.9 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

- 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Control: 2D Touch Passage between uprights: 7210 mm Max stroke: 350 mm Max distance between table -- ram: 650 mm Depth of throat: 400 mm Table width: 350 mm Locking speed: 70 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 47 kW Power needed: 380V Length: 8300 mm Depth: 2600 mm Height: 4400 mm Weight: 90 ton

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Axle with hydraulic motors Rexroth MNR R921811314 Hydraulic hub motor Rexroth 2pcs Model Rexroth MNR:R921811314 CNR:- TYP: MCR5F470F180Z32B4M2WL 12SP SN:1938362 FD:12W40 7481 Ncjbmy Ex Iov Ea I Tspou Made in the United Kingdom Shipping weight: 221 kg

Weinig high speed planing line 150 m/min with destacking, infeed system and outfeed system with automatic stacking system, Consisting of:, 01. Weinig cross chain transport for wood packages, 02. Weinig tilt hoist, 03. Transport belt for stacking sticks, 04 Weinig cross chain transport, 05 Weinig unchrambler, 06. Weinig cross chain transport, 07 Weinig automatic infeed system, 08. Weinig moulder Hydromat 30 XL, 6 spindles: B-T-R-L-T-B, max. 150 m/min, 09. Weinig transport belt, 10. Weinig outfeed system cross transport, 11. Weinig automatic stacking system, 12. Weinig cross chain transport for wood packages

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 112 mm -Pressure: max. 450 bar -Lifting capacity: 50 t -Dimensions: 220/160/H220 mm -Weight: 19 kg

Hydraulic motor PMH MCF55 Nobmjv D Hwrey Ex Ipecu Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock