hydr used for sale

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Hydraulic filter changer: 200 mm. With pressure transducer.

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

1 FERRUM laboratory hydro extractor, maximal loading capacity 2 Kg, 2800 rpm

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

Motor from Lammers Antriebstechnik 11kW, 1470 rpm Valves: HYDAC Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Oil HLP 46

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Key data: 10 t, 300 mm, 300 mm

more info on request

Key data: 3000 mm, 8 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Hydrovane compressor with FriulAir air dryer and flex. Compressed air pipes Brand : Gardner Denver Year of construction: 2015 Assets: 7.5 KW Rpm; 1.465 Max. pressure: 11 Bar FriulAir: (built in 2015) Type: ACT12/AC Air flow: Nom. 1,200 l/min.

Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).

SLAVES mod- STP C 204 of 200 tons. - 4 meters

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

Key data: 3000 mm, 12 mm, 1000 mm

Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg

Type of saw / pincer Height 1000 mm Width 1200 mm Length 800 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant A set for cutting pork cross bones. The set includes: -Scissors - Hydraulic power unit - Balancer -Sterilizer

Liebherr slide-in gearbox from stock as good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

TTS Hydraulics 7T 09 3 F PA S024 A 85 5B-S02 HOBC T LA1 COD,No. DTBO10507P SK No. BT15036893 Planetary gearboxes with hydraulics

Key data: 2000 mm, 4 mm, 650 mm

Machine Type: Guillotine Shears Manufacturer: Stückmann & Hillen Type: 125.07-4 Year of manufacture: coming soon Condition: used / in working order Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-STÜ-1024 DESCRIPTION We offer you a used guillotine shears from the manufacturer Stückmann & Hillen. Specifications Cutting capacity sheet steel 2000x4mm Weight approx. 3.8t Incl. spare blade (unsharpened) Available from the beginning of December. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Sharpened blades Machine with yearly maintenance Strokes per. Min 10 - 35 Back gauge range 10 - 1000 mm Motor size 15 kw Programmable motorised back gauge 1.5 metre side gauge 1.5 metre front support Shadow line light Automatic hydraulic hold down clamps Centralised lubrication Footswitch Shadow light beam Cycle counter Automatic shearing contacts in back gauge Blade gap and rake angle adjustment Front flip stops Adjustable stroke Work chute Hour counter Auto-diagnostics - Operating hours: 40.347 - Folding length: 4.000 mm - Folding length: 4.000 mm - Material thickness stainless steel max: 60/kg/mm2--6 mm - Material thickness steel Fe52/Fe37 max: 45kg/mm2-- 8 mm - Motor power: 5,5 kW - Control: STEP AUTOMATION EASY CUT - Dimensions (long x wide x high): 4.600 x 2.200 x 2.200 mm - Weight: 10.100 kg

Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39 Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 20C Baujahr / Year 2007 - Serial-No. 10045880-115 Schneidetisch / Cuttig Surface 900 x 430mm Armweite / Travelling Head Size 370mm Schnittleistung / Power max. 20T / 196kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 630kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulikpresse / Hydraulic Press Tränklein ZP Serial-No. 24088 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.

used, good condition from dismantling of a MAZAK Quick Turn 10N CNC Lathe built in 1985 1x Hydraulic Tailstock Center height: approx. 430 mm Space requirement LxWxH: 450 x 250 x 600 mm Weight: approx. 140 kg Subject to changes / errors in the technical data and prior sale

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VE160HD2D/63W-VAL020B The pump is NEW and fully functional. see pictures for more details.