hydr used for sale

Flow Relief Valve with Valve Chaining Unit ORSTA 10-02.11 TGL 26244 / 20 Nominal Volume Flow: 40 dm3/min ( 40 l/min ) Nominal Pressure: 32 MPa (320 bar) Actuator: Control knob with scale and lock ! one key valve chaining unit 10-05 TGL 26263 / 20 New !' Dimensions: 180 x 80 x 60 mm

Switching valve, distributor, hydraulic valve ORSTA IIB HNN012.009 Pn 16 MPa used, tested ! see also HY660, HY1100 as new and HY907 as used article ! Dimensions: 90 x 90 x 120 mm

Pressure reducing valve, hydraulic valve ORSTA 06-20.01/0 TGL 26234/20 Dimensions: 100 x 35 x 35 mm

Valve Unit, Directional Control Valve ORSTA 06-088.11-0 TGL 26223/60 Valve Chaining System TGL 26215/30 Pressure Switch D5 CO 2 TGL 10952 pressure inder valve 06-20.06-20 02 TGL 26234 control magnet G45 H TGL 32094 Dimensions: 340 x 210 x 60 mm

Directional Control Valve, Hydraulic Valve ORSTA 06-082.12-0 TGL 26223/60 Pn 32 MPa Dimensions: 80 x 45 x 50 mm

Solenoid valve, directional control valve, hydraulic valve ORSTA 06-03.03 02-0 TGL 26223/60 Pn 32 MPa Qmax 60 dm3/min Control solenoids: ORSTA G45-H TGL 32094 24 V Gs Dimensions: 220 x 50 x 90 mm

Valve Daisy Chain Unit ORSTA 10 - 02.01 TGL 26244 / 20 Current Limiting Valve Dimensions: 170 x 110 x 55 mm

Valve interlinking unit with key ORSTA 10 - 05 TGL 26265 / 20 Nominal pressure: 32 MPa current limiting valve 10 - 02.11 TGL 26244 / 20 New !' Dimensions: 170 x 110 x 55 mm

Pressure reducing valve, hydraulic valve ORSTA AS 16-2-01 TGL 10950 Nominal pressure: 16 MPa Dimensions: 220 x 130 x 70 mm

Throttle valve, hydraulic valve ORSTA AOS 8-160 TGL 10962 3/7 Dimensions: 110 x 40 x 100 mm

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter ORSTA Dimensions: 110 x 90 x 70 mm

1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...

Check valve, hydraulic valve ORSTA A 8-16-0.3 TGL 10969 Nominal pressure: 16 MPa Dimensions: 120 x 30 x 30 mm

directional control valve, hydraulic valve ORSTA 10-042.22-0 TGL 26223 / 60 32 MPa ( 320 bar ) 120 dm3/min ( 120 l/min ) 2 x control solenoid G60-H 24 V DC used, tested ! Dimensions: 290 x 60 x 100 mm

Oil filter, filter ORSTA BCA 10/25 ( BCA10/25 ) TGL 21541 Nominal pressure: 10 bar with pressure switch type A TGL 15687 New ! Dimensions: 180 x 140 x 105 mm

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in Spain in 2022 by MAQUINARIA GEKA S.L.U. This machine, distinguished by its extensive machining capabilities, is intended for precise hole and corner punching as well as shearing flat bars, angles and solid bars. Each of the 5 work stations is controlled by two hydraulic cylinders, which enable independent or parallel operation at two stations simultaneously. All this makes the offered GEKA HYDRACROP 55 S ironworker machine the perfect choice to significantly increase the productivity of any industrial plant. GEKA HYD 55 S weighs 1200 kg. Technical specifications of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - total power: 5.5 kW - power supply: 400 V; 50 Hz - weight of  ...

Pressure Relief Valve, Hydraulic Valve ORSTA CNS 10-2-02 TGL 10947 Nominal pressure: 16 MPa New ! Dimensions: 105 x 35 x 35 mm

Pressure switch ORSTA TGL 10952 ( TGL10952 ) A0 1 P: 32 bar Dimensions 200 x 95 x 120 mm

Flow Relief Valve with Lock, Hydraulic Valve ORSTA 06-24.11 TGL 26245/40 Pn: 32 MPa Dimensions 150 x 50 x 50 mm

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...