hydr pressbrake used for sale

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Pneumohydraulic cylinder TOX PressotechnikHydro-pneumatic press, power packType: S 04.00.050.12 DFabr. Item No.: 208696.460 Year of construction approx. 2000Printing capacity: 4.0 ton. at 10 barPressure capacity: 3.0 ton. at 8 barPressure capacity: 2.6 ton. at 7 barPressure capacity: 2.4 ton. at 6 barPressure capacity: 2.0 ton. at 5 barPressure capacity: 1.6 ton. at 4 barPressure capacity: 1.2 ton. at 3 barTotal stroke: 50 mmPower stroke: 12 mmPiston rod: 30 mmThread mount piston rod: M22 x 2 mmCompressed air requirement: 3 to 10 bar- electronic

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Hydraulic motor, oil motor, hydraulic pump Model No.: 013.44186 -Toothed shaft mounting: Ø 44 mm -Dimensions: 470/260/320 mm -Weight: 130 kg

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

radial piston motor, hydraulic motor, oil motor, hydraulic pump -Shaft mounting: Ø 63 mm -Number: 1x motor available -Price: per piece -Recess recording: 314 mm -Dimensions: 550/460/460 mm -Weight per motor: 190 kg

Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg

Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg

SC7 CNC-besturing: - automatische snijhoek - mes spel automatisch - automatische achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 12 ton

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

sheet width: mm plate thickness: mm distance between columns: mm digital: working width: 4500 mm : 8mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 12,5 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. The data for th ...

Hydraulic pressure switch -Type: TGL10952 -Adjustable: from 0 to 320 bar -Price: per piece -Number: 9 available -Weight: 0.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 270/120/110 mm -Weight: 6.7 kg

pressure: 75 t throat: 280 mm stroke: 303 mm total power requirement: 15 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 250 mm stroke: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 1000 x 1700 x 2600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 310/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 9 kg

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 7 kg

Hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Quantity: 1 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

sheet width: - mm plate length: - mm plate thickness: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

Hydraulic filter -Type: HY13479 -Quantity: 10 available -Price: per piece -Weight: 0.5 kg/piece

Cutting lenght 6000 mm Cutting thickness 13 mm