hydr pressbrake used for sale

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor VICKERS 2520V12A8 Shaft diameter: Ø 22 mm Flange diameter ( inside ): 102 mm Bolt circle diameter: Ø 115 mm New ! Dimensions: 310 x 175 x 160 mm

pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump HUGRABPUKA A10X pressure: 17.5 MPa 1500 rpm New ! Dimensions:130 x 90 x 115 mm

Hydraulic pump HUGRABLUKA A 18X ( A18X ) 2.5 MPa 1500 rpm New ! Dimensions: 90 x 110 x 135 mm

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

Hydraulic Power Unit With Air Operated Hydraulic Pump GRACO FIRE-BALL pump: L83 6203876 Air motor: B84 6203963 Ratio: 5:1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

Maximize the power and efficiency of your machinery with the DENISON M3B Series Hydraulic Motor, specifically engineered to convert hydraulic pressure into rotary motion for heavy-duty industrial applications. The M3B 012 1N00 B102 model delivers exceptional torque and precision, ideal for applications requiring high performance and reliability. Type: Fixed Displacement Rotary Hydraulic Motor Max Pressure: Up to 350 bar Speed Range: Up to 4000 RPM Nsbmsv D H Nney Ex Ipocu Applications: Industrial machinery, hydraulic systems, mobile equipment Made In: France Features: 1. Rotary Motion: Converts hydraulic energy into rotational power for driving mechanical systems 2. Durability: Built to withstand high torque and pressure in demanding environments 3. Efficient Operation: Suitable for continuous, high-load applications 4. Compact Design: Space-efficient for easy integ ...

Hydraulic power unit WEHRDOHLER PUMPENFABRIK FMA 1/12 ( FMA1/12 ) P: 40 bar Q: 3.2 l / min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 590 x 550 x 500 mm

Hydraulic power unit with two pumps HPE Q1 = 48 l/min p1 max = 90 bar P1 = 7,,P1 5 KW Q2 = 23 l/min p2 max = 80 bar P2 = 4 KW 400 V 200 l Tank used, tested ! Dimensions: 1700 x 1200 x 1650 mm

Hydraulic Power Unit FLUTEC PTOK-250 / 1.1 / M / R ( PTOK-250/1.1/M/R ) max: 100 bar max: 28 l/min with 100 liter tank pump with cooling 220 / 380 V motor: 3 kW IP54 used, tested ! Dimensions: 820 x 500 x 830 mm

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

Hydraulic Joystick REXROTH 5 TF 6 U 06-20/1 Dimensions 400 x 130 x 130 mm

Hydraulic workshop press PREMIUM WPMEH 30/2 Demonstration article Condition: slight signs of wear --> paint defects/scratches Standard equipment - Overload safety valve - Press pressure gauge - Switching valve up / down - Cylinder piston chrome-plated - Press table with stake-out bolt - Operating instructions / CE Specifications: Pressing capacity max. 30 tons Electro-hydraulic drive Two drive speeds Manual Hand Pump Press table chain (height adjustment) Oil flow stage 1/2 2.82 / 11.84 l/min Piston speed level 1/2 9.8 / 3.57 mm/s Return speed 18.11 mm/s Motor power 1500 W Mains connection 400/50 V/Hz Machine height 2120 mm Machine length without pump 1000 mm Machine width 695 mm Inlet length 750 mm Strap width 260 mm Inlet height max. 950 mm Machine length with pump 1315 mm Machine width with pump 805 mm Piston stroke 380 mm Weight 385 kg Subjec ...

Hydraulic power unit with filter and tank REXROTH / FMB BLICKLE 120 bar 9 L/min tank 100 L pump pump BUCHER QX22-006R119 Pd 125 bar Vg 006 cm3/U engine: 2,2,000 2 kW 1410 rpm 380 V used, tested ! Dimensions: 1000 x 900 x 1500 mm

Hydraulic power unit with tank REXROTH pump 1: PV7-17/25-45RE01MC3-08 R900538525 p max: 80 bar ( pump ) pump 2: PV7-16/10-14RE01MC3-16 R900598753 system pressure pressure : max. 70 bar tank: 250 l engine: SIEMENS 1LA7163-4AA91-Z 11 kW 1460 rpm 400 / 690 V 3AC 50 Hz IP55 used, tested ! Dimensions: 1220 x 1000 x 1920 mm

Key data: 3 t, 150 mm

For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Hydraulic power unit with radiator BOSCH p: 75 bar Q: 23 / 15 l/min tank capacity: approx. 100 L motor: 3 kW 400 V Radiator: 0.37 kW used, tested ! Dimensions: 1230 x 600 x 1660 mm

Hydraulic power unit with tank PAGUS pump: ORSTA, SACHSENHYDRAULIK GmbH PE15-55/16.0-RH3L Operating pressure: max. 16.0 MPa ( 160 bar ) ( Pump ) Displacement volume: 55 cm3 / U (pump) Rated speed: 1500 rpm Motor: VEM K11R 132 M4 ( K11R 132 M4 ) 7,7 5 kW 1440 rpm 400 / 690 V 3AC 50 Hz IP55 Tank: approx. 350 l used, tested ! Dimensions: 1510 x 800 x 1200 mm

Hydraulic power unit with tank BOSCH 0/813 / 246 / 493 ( 0/813/246/493 ) SHO 2877 50593 0 / 160 bar 6 / 16 l/min engine: 3 kW 400 / 690 V Tank: 50 l used, tested ! Dimensions: 800 x 390 x 800 mm

Hydraulic pump VOLVO 5001813 4 1 ( 500181341 ) F 917 8526 Dimensions: 120 x 120 x 75 mm

Hydraulic pump HAWE Type R2,6 Pn 550 bar V 1,82 cm3/U used, tested ! Dimensions: 190 x 190 x 150 mm

Hydraulikheber MADIX DRESDEN SK 25 / 175 ( SK25/175 ) lifting capacity: 25 mp lifting height: 175 mm used, tested ! Dimensions: 300 x 130 x 200 mm

Hydraulic pump, 0513300201, 140 bar, Bosch, mint condition Please note: This is an original Bosch product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, has never been used and is in mint condition. Drive shaft d20mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and co ...

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Hydraulic Cylinder REXROTH CD 70X 25/ 16-0500Z11/01HCDM11A ( CD70X25/16-0500Z11/01HCDM11A ) 00537363 stroke: 500 mm rod diameter Ø 16 mm Dimensions: 670 x 90 x 50 mm

Hydraulic Pump, Gear Pump PZL-HYDRAL 25200 210 ( 25200210 ) TGL 37069 New ! Dimensions: 130 x 120 x 90 mm

Key data: 200 t, 500 mm, 200 mm

(1982) 200t Lauffer Hydraulic Press High-Speed Hydraulic Press with Advanced Shock Absorption This Lauffer hydraulic press is a high-performance machine designed for speed and precision, capable of 2,000 kN of pressing force. Its high-speed designation is backed by a rapid descent speed of 330 mm/sec and a sophisticated 8-fold flat guidance system to maintain ram alignment even under heavy or off-center loads. Technical Details Machine Type: Hydraulic Press Manufacturer: Lauffer Model: RPS 200 Year of Manufacture: 1982 Nominal Force: 200t Max. Return Force: 225 kN Max. Ram Stroke: 200 mm Shut Height: 500 mm Ram Guidance: 8-fold flat guidance Table & Ram Surface Area (W x D): 800 mm x 630 mm Table Hole Diameter: 204 mm Clearance Between Uprights (Front / Side): 840 mm / 320 mm Operating Speeds: Rapid Descent: 0 – 330 mm/sec (steplessly adjustable) Pre ...

Key data: 250 t, 500 mm

(2018) 250t Hidroliksan Hydraulic Press Hydraulic Press with Integrated Die Cushion for Deep Drawing This 2018 hydraulic double-column press is a heavy-duty production unit designed for versatility, featuring a robust 250-ton capacity and high-quality Rexroth and SICK components. With its 100-ton integrated die cushion and generous 500 mm stroke, it is exceptionally well-suited for complex deep drawing and forming operations that require precise pressure control. Technical Details ‍ Machine Type: Hydraulic Double-Column Press Manufacturer: Hidroliksan Model: H-TYPE Nominal Force: 250t Return Force: 50t Stroke Length: 500 mm Speeds: Approach: 160 mm/sec Pressing: 5 – 15 mm/sec Return: 190 mm/sec Working Surfaces: Ram Plate: 1,000 x 800 mm Table Plate: 1,000 x 800 x 100 mm Components: Pump: REXROTH (71cc – 103 L/min) Motor: 22 kW (30 hp), 1,500 rpm ...