hyd press used for sale

General SKU215X084 MakeVMI TypeT110 SE Mach.No.162928 Year of construction2011 Main Features MaterialStainless steel Motor3 KW Length1290 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1290 mm Sizes stirring headDia. 170 mm Number of stirrers on shaft1 Motor3,0 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space1,25x1,40 m Total height2,30 m Weight450 kg CEcheckStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

General SKU215X087 MakeVMI LocationBarneveld CEcheck TypeChariot Dalle T110 DE Main Features MaterialStainless steel Motor3 KW Length1375 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1375 mm Sizes stirring headø 175 mm Number of stirrers on shaft1 Motor3 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Speed mixing shaft1500 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4307 (304L) With jacketcheck General No.161551 Year of construction2011 Mounted on wheelscheck With switchcheck Floorspace1,25x1,40 m Total height2,30 m Weight450 kg ATEX designedcheckStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button

General SKU215X086 MakeVMI Agitator LocationBarneveld CEcheck TypeDALLE HYD T 110 DE Main Features MaterialStainless steel Motor1.5 KW Length1375 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1375 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft142 — 1420 — 2471 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.167386 Year of construction2012 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

punching force max.: 50 t throat: 510 mm stroke: 32 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: 35 bei 10 mm Hub/min Working height: 1070 mm daylight: 350 mm table width: 255 mm dimensions: ca. 1080 x 650 x 1680 mm material layer: 630 X 535 weight: ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -Handover in its current condition as inspected -2 pieces: Transport trolley as a semi-finished product, still without controls and steering. -All 4 wheels are steerable -Heavy-duty transport trolley, max. load capacity: 3000 kg -Load capacity per wheel: 750 kg -Price: complete -Transport dimensions: 2670/440/H430 mm -Empty weight: 598 kg

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack, aluminum jack, hydraulic lifting stand -Manufacturer: Tangye, Aluminum jack, hydraulic lifting jack 6.5 ton -Type: Hydramite plus -Stroke travel: 76 mm -Shaft: Ø 30 mm -Quantity: 1x lifting jack available -Dimensions: 240/100/H135 mm -Weight: 3.9 kg/pc.

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

spindle diameter: 135 mm x-travel: 950 mm distance between columns: 1100 mm y-travel: 700 mm cross rail adjustment - vertical: 780 mm quill travel: 300 mm max. distance between table and spindle-nose: 1000 mm table surface area: 1100x842 mm table load: 1500 kg speeds: 40-2000 U/min adjustment speed: 5-1500 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.

This 4-axis NORDEST HYDRA MP 110 boring machine was manufactured in 2005. Ideal for precision boring tasks, it offers robust construction and reliable performance. If you are looking to get high-quality boring capabilities, consider the NORDEST HYDRA MP 110 machine we have for sale. Contact us for more information.

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price

Hauer Hydrac Front hydraulic, Original and unused, suitable for Case CS75, CS86, CS94 Steyr

Dough divider / ciabatta plant ZELAIETA, type: Hydrapate TXA-AUT-ROLL -In very good condition- For making bread with a high percentage of 70 - 90% water, such as classic ciabatta, basto, baguette, rustic bread, rustic bread with pointed ends, mini bread, etc. - Ideal for ciabatta due to gentle dough processing and long resting times - Lamination and lengthening of the dough by up to 60% by rolling out in the satellite head with multi-rollers - Programmable control of up to 16 programs - Flexible shaping through precise cutting into rectangles, squares or diamonds with the guillotine - Automatic settling unit on nets, boards or conveyor belts - Dimensions: 7.0 m length x 1.3m width - El. Connection: 400 V, 2.0 kW Condition: Very good, ready to use Viewing and test run are possible.

CONTROLS   electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 50 mm   diameter: 700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 100 kW The machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 t. weight: 1,8 t hydraulic: ja round bar steel: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ram punch AMC Hydromatic 220 Label die cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ram punch AMC Hydromatic 220 Label die cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ram punch AMC Hydromatic 220 Label die cutter Price: 8500 EUR Download PDF Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm N ...

Horizon APC-T61 Hydraulic guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Horizon APC-T61 Hydraulic guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon APC-T61 Hydraulic guillotine Price: 4000 EUR Download PDF Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory elec ...

Ideal 7260 Hydraulic Paper Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ideal 7260 Hydraulic Paper Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ideal 7260 Hydraulic Paper Guillotine Price: 11000 EUR Download PDF Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter b ...

Ideal 5222 Digicut Hydraulic Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ideal 5222 Digicut Hydraulic Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ideal 5222 Digicut Hydraulic Guillotine Price: 5250 EUR Download PDF Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply  ...

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

CONTROLS   electronic controls

pressure: 22.0 t flat steel: 120 x 15.0 mm ST stroke: 200 mm working feed: 8.0 mm/sec return speed: 30.0 mm/min work height max.: 925 mm table:: 630 x 1100 mm motor: 400 Volt 50 Hz total power requirement: 1.5 kW weight: 630 kg range L-W-H: 900 x 1200 x 920 mm Description: - Electro-hydraulic horizontal bending machine - Cylinder located beneath the worktable â hydraulic stroke adjustment of the carriage - Solid worktable made of hardened steel - Large, unobstructed work surface - Machine made of hardened and ground forged steel - Micrometric adjustment of the working stroke via a hydraulic valve using handwheels on the front of the machine - Continuous adjustment, even at maximum operating capacity, so that the desired bending angle is achieved without trial and error - Thanks to this system, the machine is suitable for both the production of prototypes and large-scale series produc ...

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 45 mm L-beam: 12 mm : 40 flat steel: 450x15 mm L-beam 90°: 152x152x13 mm : 45 mm square edge steel: 45 mm : 12 mm weight of the machine ca.: 2323 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 70.0 t square edge steel: 45.0 x 45.0 mm round bar steel: 45.0 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mm shear: flat material: 450 x 15 / 300 x 20 mm throat: 300 mm work stroke: 70.0 mm work height max.: 1095 mm total power requirement: 9.0 kW weight: 1925 kg range L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...

punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...

puncher: 100 t round bar steel: 50.0 mm square edge steel: 50 x 50 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mm shear: flat material: 600 x 15 mm throat: 300 mm work stroke: 80.0 mm work height max.: 1165 / 960 mm total power requirement: 9.0 kW weight: 2250 kg range L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches - Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the  ...

thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software so ...

thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090054 : prompt, Zwischenverkauf v : Spanien : 17300 € : 298.94 € : 1 : 15570 € : 55 to : 250 mm : 5 : 40/10 mm : 20 mm : 37 1/min : 300x15 mm : 120x10 mm : 40 mm : 10 mm : 5 kW : 1670 mm : 1160 mm : 2090 mm : 1390 kg 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.