husky injection used for sale

Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details.

Ref. no.: 18613 Manufacturer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 30 mm Injection volume: 74 cm³ Shot weight: 60 g Injection pressure: 1390 bar Measurements and weight Dimensions: 4,3 x1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic mac ...

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Ref. no.: 18614 Manufacturer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 18 mm Injection volume: 26 cm³ Shot weight: 23 g Injection pressure: 2800 bar Measurements and weight Dimensions: 4,3 x1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic mac ...

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

Ref. no.: 18615 Manufacturer: DEMAG Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic ma ...

This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Ref. no.: 18616 Manufacturer: DEMAG Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic ma ...

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details.

Ref. no.: 18617 Manufacturer: DEMAG Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic ma ...

This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.

Injection molding machine Haitian Zerres ZE600 built in 2019 and MB Conveyors conveyor belt from 2015.

This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2000. This Netstal Synergy 1500-460 features a clamping force of 1500 kN and an injection force of 279 kN. It offers an opening stroke of 0–450 mm and a mould height range of 400–700 mm. If you are looking to get high-quality moulding capabilities, consider the Netstal Synergy 1500-460 machine we have for sale. Contact us for further details.

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...

Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine.

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Key data: 3500 kN, 519 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Key data: 1000 kN

Boy 100E / Hybrid Machine Year of Make: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Spray pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 430x360 mm Size of the clamping plates: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touch Screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Key data: 900 kN

Boy 90 M Year of Make: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Spray pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tiebar spacing: 430x360 mm Size of the clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 1 Dimensions: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details.

Key data: 800 kN

Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details.

Key data: 550 kN

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...

This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details.

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW A ...

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

Key data: 550 kN

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...

Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.

Key data: 600 kN, 35 mm

SANDRETTO Serie 8 192/60 - 60 T Reference: 192/60 Screw Diameter: 35 mm Injection Volume: 131 cm³ Injection Pressure: 1450 bar L/D Ratio: 21 Distance Between tie bar: 325 x 325 mm Platen Dimensions: 500 x 500 mm Interface Robot Dimensions: 5.17 m x 1.17 m x 1.98 m Weight: 4100 kg

Key data: 100 kN

Boy XS / Excellent technical condition Year of Make: 2020 Injection unit: Screw diameter: 12 mm Injection weight: 4.1 g Spray pressure: 3128 bar Dosing volume: 4.5 ccm Clamping unit: Clamping force: 10 t Handlebar spacing: 160 mm Size of the clamping plates: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 4 - Touch Screen Additional equipment: Machine like new Euromap 67 Robot interface Air Valve x 6 Built-in side sprue picker Wittmann automatic conveyor with dryer of the Farratech brand It is possible to buy clamping elements for tools of the AMF brand Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at  ...

SANDRETTO Series 8 430/110 Clamping Force: 110 T Year : 1998 Distance Between tie bar: 415 x 415 mm Platen Dimensions: 610 x 610 mm Mold Thickness (min/max): 100 - 460 mm Opening Stroke: 410 mm Injection Volume: 353 cm³ Injection Pressure: 1215 bar Screw Diameter: 50 mm Weight: 5700 kg Dimensions: 5.67 x 2.03 x 1.32 m SEF 100

Key data: 3000 kN

Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...

Key data: 2300 kN, 50 mm

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

Key data: 3000 kN

Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit: Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: 3 ...