husky injection used for sale

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Key data: 4200 kN, 1090 g/PS, 70 mm

Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

Key data: 6500 kN, 80 mm

Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

HAITIAN ZHAFIR 230 T Hybrid Injection Molding Machine Type: ZE 2300-830 Closing Force: 2300 kN / 230 T Year: 2015 Screw Diameter: 50 mm Injection Volume: 421 cm³ Injection Pressure: 2000 bar L/D Ratio: 25 Distance Between Tie bar : 620 mm x 620 mm Opening Stroke: 550 mm Mold Thickness (min/max): 220/600 mm Motor Power: 151 kW

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

Key data: 14000 kN

The machine was fitted with new seals for the spars in 2025. Delivery by pick-up only

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

Key data: 16000 kN

The machine is still energized and functional. Delivery by pick-up only. The offer is only valid for a short time

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

Key data: 16000 , 8825 , 140

Presse à injecter HAITIAN 1600 T type MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine.

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

Key data: 3800 , 1296 , 70

Presse à injecter HAITIAN 380T type MARS MA 3800 / 2950 Force de fermeture : 3 800 KN Année : 2012 Course d’ouverture moule : 700 mm Epaisseur moule min / max : 280/730 mm Distance entre colonnes : 730 x 730 mm Diamètre vis : 70 mm Volume théorique d'injection: 1 424 cm3 Poids de l’injection en PS : 1 296 gr Rapport L/D : 22,9 Pression d’injection max. : 2070 bars Capacité de plastification : 64,70 gr/sec Vitesse d’injection : 381 gr/sec Quantité d’huile dans réservoir : 690 litres Dimensions : 7,50 x 1,80 x 2,35 m Poids total : 17 T

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

Key data: 468 kN, 2043 g/PS, 83 mm

- Top condition - Used for only one tool, no conversions - 2 Core moves - 8-way hot runner regulator - Nitrided high-strength screw -

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Key data: 3000 kN

SANDRETTO SERIE 9 - 300 T Year : 2005

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

BOY 35 E injection molding machine Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 T Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : laminar flow

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

Key data: 500 kN, 91 g/PS, 35 mm

For sale is a KraussMaffei injection molding machine type 50-190 C1 from 1994. Prices and other inventory on inventar-verkauf.de/id/alesco The machine is equipped with a KraussMaffei control panel/control panel for operation and monitoring. In addition, a handling/removal system from Geiger Handling is mounted on the machine, which can be advantageous for automated processes in production. Overall, the system makes a well-maintained, used impression with the usual visual signs of wear from operation. Details Brand: KraussMaffei Type: 50-190 C1 Factory No.: 44207 Year of Make: 1994 JN Total: 45 A Total: 50 A UN motors: 400 V UN heating: 400 V Type of current: 50 Hz Circuit diagram: 697 5107 Circuit diagram: 628 8205 Device Connection Diagram: 697 5207 Accessories Geiger Handling (Removal Unit/Handling) KraussMaffei control panel/contr ...

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible.

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 120MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

B&A REF: 9254 TON: 60 SHOT WEIGHT: 151 STROKE VOLUME: 166CM3 INJECTION PRESSURE: 1235AR PLATEN SIZES: 650 X 650MM DBTB: 360 X 335MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA 2 MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW SCREW DRIVE: HYDRAULIC

WITTMANN SPRUE WP80 X-100 Y-700 Z-90

B&A REF: 8838 TON: 820 SCREW DIAMETER: 93MM SHOT WEIGHT: 2555 STROKE VOLUME: 2777CM3 INJECTION PRESSURE: 1478AR PLATEN SIZES: 1730 X 1560MM DBTB: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 CORE PULLING: 3 AIR VALVES: 2 MOTOR: 93 HEATING CAPACITY: 41KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC