We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ
used
WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay
used
JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE
used
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
used
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production
used
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production
used
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller
used
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B
used
Preform Weight (Max): 17 g // Neck Type: 30/25
used
Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible
used
Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.
used
motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible
used
Clamping Force: 300 ton // Shot Weight (Max): 772 g
used
1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY
used
PET Preform Injection Molding Machine Production Line with Complete Peripherals Manufacturer: HUSKY Type: GL 300 PET P85/95 E100 Year of construction: 2000 Condition: Very good - refurbished by the manufacturer Husky in 2020 / Encore 2.0 / ProAct Program Equipment / Peripheral: Picking robots: -Husky FSI200GL300 - Refurbished in 2018 Packing unit: Soft Drop System with Turning Plate for Mesh Boxes Granule drying conveyance consists of: - Piovan Easy 3 - Piovan DP 621 Dry Air Dryer with Molecular Sieve Towers - Year of construction: 2006 - Piovan TN 800 Hopper 800 dm3 - Year of manufacture: 2006 - Piovan F48/2 suction delivery unit / vacuum pump - Year of manufacture: 2010 Tool Dryer / Mould Dryer: - Piovan RPA1800 Year of manufacture: 2016 Tool Temperature Control Device: - Moldmasters M2M Year of manufacture: 2015
used
UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY * HUSKY GL300 YEAR 1998 * MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. * Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor * 400v 50hz * Condition: Fair condition, connected (can be inspected) * More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense
used
HUSKY HYLECTRIC H600 RS80 / 70 (year 2011) Closing force: 6000 kN Space between columns: 1020 x 1020 mm. Size of plates: 1440 x 1480 mm. Stroke of the closing unit: 850/1450 mm. Mold height (min./max.): 330/930 mm. Mold height with support for stacked molds (min / max): 380/930 mm. Maximum separation between plates: 1780 mm. Expeller stroke: 200 mm. Ejector force: 112 kN Diameter of the columns: 168 mm. Maximum weight of the mold: 10,400 kg. Empty cycle: 3.2 s. Cycle time E6: 2.3 s. RS injection model Work capacity: 2733 Screw diameter: 70 mm. L / D screw: 25.0 Injection pressure: 2030 bar. Injection stroke: 350 mm. Injection capacity: 1347 cm3 Heating power of the screw sleeve: 42.0 kW Control areas of the screw sleeve: 5 Pump-based standard injection flow: 500 cm3 / s Accumulator-assisted injection flow rate: 1819 cm3 / s Assisted accumulator air injection ...
used
PET PREFORM Injection Molding Machine Manufacturer: HUSKY Type: XL 300 P Year of construction: 1994 Hours read (h): 19,672 Serial Number: 10816-L-94010 Condition: refurbished 2017 (see PDF) Screw Ø: 100 mm Clamping force: 300 t Panel size: 1,060 mm x 1,030 mm Tie bar spacing (H x V): 720 mm x 720 mm max. daylight: 1,040 mm Injection Position: Horizontal Dimensions injection unit (WxDxH) approx. 500 x 180 x 210 cm Dimensions clamping unit (WxDxH) approx. 440 x 195 x 260 cm Dimensions control cabinet (WxDxH) approx. 305 x 70 x 255 cm Weight of the injection unit 16 t Weight clamping unit 20 t Equipment: - Robot removal system HUSKY S/E Robot B Granulate dryer and conveyor belt: Dry Air Dryer Manufacturer: PIOVAN Type: DS528, Year of manufacture: 2003 (refurbished 2017) Serial Number: ODS 864 Air flow: 1,600 m³/h Funnel T4000IX Serial No.: LZ 215 C ...
used
PET PREOFRM injection mould Hotrunner : PET injection mould Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set and cooling mould
used
ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz
used
H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 95 mm - Injection pressure: 2.230 bar - Injection volume: 3.544 cm? - Screw L/D ratio: 26,4 - Ejector stroke / force max.: 300/285 mm / kN - Clamping force: 13.500 kN - Mould height max: 1.400 mm - Mould height min: 800 mm - Daylight between platens max: 3.100 mm - Platen size (h x v): 2.300 x 2.010 mm - Distance between tie-bars (h x v): 1.700 x 1.350 mm - Control: POLARIS - Core pulls: 2 - Power: installed max: 180 + 87 kW - Weight: 70.000 kg - Dimensions (long x wide x high): 12.000 x 3.500 x 5.000 mm
used
UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,
used
HUSKY HYLECTRIC H400 RS65/60 ( year 2011) Working hours: 64.000 h. Clamp force: 400 kN Tiebar spacing (HxV): 920 x 920 mm. Platen size (HxV): 1310 x 1310 mm Clamp Stroke: 725 / 1280 Shutheight (min-max): 320/875 mm. Daylight: 1600 mm. Ejector stroke: 200 mm. Ejector force: 96 kN Tiebar diameter: 148 mm. Dry cycle: 2.7 s. Working capacity: 1696 Screw diameter: 60 mm Screw L/D: 25.0 Injection pressure: 2000 bar Injection stroke: 300 mm. Injection capacity: 848 cm3 Barrel heat power: 27.2 kW. Barrel control zones: 4 Accumulator assist injection rate: 984 cm3/s Carriage force: 80 kN Melt channel diameter: 14 mm. Oil volume: 900 l. Dimensions: Width x height: 2203 x 2470 mm. Length: 9279 mm Weight: 25t
used
H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller