husky g used for sale

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 18 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg

Screws, hexagon head screws, socket head cap screws, Allen head screws -various sizes - various grades: 4.6/5.6/8.8 -various manufacturers: Fuchs, Würth, Sisma, FS -Euro pallet: 1 -Weight including packaging: 340 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: approx. 40 collets -various sizes -Cone: approx. Ø 22/28 mm -Cone length: 13 mm -Shaft: Ø 20 mm -Sale: only complete set -Weight: 4 kg

Saw blade 12 pieces -Various sizes -From: Ø 125 mm to: Ø 180 mm -Package: complete -Weight: 7 kg

Control amplifier, servo motor control -Type: 3 TRM 2 G11-WO/ZE 5 -2 Pulse Thyroid Control Amplifiers -9 V/1500 46 A/9 V -9 V/3000 11 A/1.1 V -9 V/1500 46 A/9 V -Weight: 9 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: 11 collets -Various sizes -Hole: Ø 5-28 mm -Length: 64 mm -Shaft: Ø 32 mm -Recess: Ø 38 mm -Sale: only as a package -Weight 2 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: GM5002 GIMC-4015-US -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

CEE plug -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg

CEE wall socket -Construction -5 pole -Type: GHG 531 4506 V0000 -EX Protected -Weight: 0.5 kg

Compressor control, compressor control, base load switching circuit -Compressor control: for circuits with multiple compressors -Handover in its current condition as inspected -Dimensions: 220/320/H140 mm -Weight: 4 kg

Reflective photoelectric sensor, optical sensor -Type: BES M08MD-GNX10B-EV02-EEX Quantity: 15 available Price: per package -Weight: 0.2 kg

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Screw clamps, pipe clamps, pipe fixings -DN: 20/22 -DN: 25/28 -DN: 32/34 -DN: 40 -DN: 50/52 -DN: 65/70 Price: complete Package weight: 21.5 kg

Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mount: Ø 32 mm -230 VAC -Protection class: IP 54 -20 Nm 90° -Weight: 1.7 kg

Diaphragm valve DN40, plastic diaphragm valve 2/2 way -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Weight: 0.4 kg

Check valve, check valve -Type: RK 86A DN 32 -Connection: DN32 -Nominal pressure: PN40 -Material: stainless steel -Weight: 0.8 kg

Check valve, check valve -Type: RK 86 DN 25 -Connection: DN25 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.5 kg/piece

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, check valve -Type: RK 86A DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 6x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Number: 2 valves available -Price: per piece -Weight: 1.2 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN32 -Nominal pressure: PN40 -Total length: 28 mm -Material: Stainless steel -Number: 5 valves available -Price: per piece -Weight: 0.8 kg/piece

Check valve, non-return valve -Type: RK 86 -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: Stainless steel -Weight: 3.5 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7.5 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Motor protection switch, star-delta switch, reversing switch -Type: GV3 M10 -Adjustment range in Amps: 4-6 Price: per piece -Quantity: 4x Available -Weight: 0.7 kg

Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg

Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg

end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

Slewing Bearing, Swivel Bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 middle bearing diameter: 260 mm Inner diameter: 190 mm Outer diameter: 329 mm without toothing sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.800. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy to invite you for a viewing. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time o ...

Technical data: Manufacturer: Gildemeister Type: NEF 400 Year of Make: 2007 Control: Siemens 840D ShopTurn Travel X/Z: X 220 mm, Z 700 mm Operating hours: 31,812 h Working spindle Spindle bore: 65 mm Speed: 4,000 rpm Power: 15/12 kW Torque: 400/320 Nm Rapid traverse X/Z: 15 m/min Circumferential diameter over bed: 400 mm Turning length: 650 mm Tool turret Direct recording: 8x Shaft cross-section: 20 x 20 mm Shaft diameter for drill rods: 25 mm Tailstock Tailstock: MK4 Quill stroke: 40 mm Dimensions and weight Dimensions: 2,100 mm x 1,750 mm x 1,710 mm Weight: 2,800 kg Condition Condition: Used Functional: Tested and fully functional

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE120UK-2RS -Number: 3x spherical bearings available Price: per piece -Weight: 7.9 kg

Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Gumasol, solid rubber tires type GLE -Tire size: 4.00-8 -Quantity: 4 pieces available -Price: per piece -Dimensions: Ø 410 x 105 mm -Weight: 10 kg/pc.

Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Coil spring, steel spring, compression spring -Diameter: Ø 80 mm -Length: 110 mm -Wire thickness: 7 mm -Number: 144 springs available -Price: per piece -Minimum order quantity: 4 pieces -Weight: 0.3 kg/piece

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...